Search

With the progressive exhaustion of fossil energy and the enhanced awareness of environmental protection, more attention is being paid to electric vehicles (EVs). Inappropriate siting and sizing of EV charging stations could have negative effects on the development of EVs, the layout of the city traffic network, and the convenience of EVs' drivers, and lead to an increase in network losses and a degradation in voltage profiles at some nodes. Given this background, the optimal sites of EV charging stations are first identified by a two-step screening method with environmental factors and service radius of EV charging stations considered. Then, a mathematical model for the optimal sizing of EV charging stations is developed with the minimization of total cost associated with EV charging stations to be planned as the objective function and solved by a modified primal-dual interior point algorithm (MPDIPA). Finally, simulation results of the IEEE 123-node test feeder have demonstrated that the developed model and method cannot only attain the reasonable planning scheme of EV charging stations, but also reduce the network loss and improve the voltage profile. [ABSTRACT FROM AUTHOR]

Some uncertainties, such as the uncertain output power of a plug-in electric vehicle (PEV) due to its stochastic charging and discharging schedule, that of a wind generation unit due to the stochastic wind speed, and that of a solar generating source due to the stochastic illumination intensity, volatile fuel prices, and future uncertain load growth could lead to some risks in determining the optimal siting and sizing of distributed generators (DGs) in distribution system planning. Given this background, under the chance constrained programming (CCP) framework, a new method is presented to handle these uncertainties in the optimal siting and sizing of DGs. First, a mathematical model of CCP is developed with the minimization of the DGs' investment cost, operating cost, maintenance cost, network loss cost, as well as the capacity adequacy cost as the objective, security limitations as constraints, and the siting and sizing of DGs as optimization variables. Then, a Monte Carlo simulation-embedded genetic-algorithm-based approach is employed to solve the developed CCP model. Finally, the IEEE 37-node test feeder is used to verify the feasibility and effectiveness of the developed model and method, and the test results have demonstrated that the voltage profile and power-supply reliability for customers can be significantly improved and the network loss substantially reduced. [ABSTRACT FROM AUTHOR]