Search

Variable-speed wind turbines inject harmonic currents in the network, which may potentially create voltage distortion problems. In this paper, a case study is presented for a 10-MW wind farm, intended to be connected to a network with extended high-voltage submarine cable lines. First, the system modeling approach and the harmonic load-flow calculation is described. Then, the harmonic impedance of the system is calculated for a variety of configurations and operating conditions, and its main characteristics are discussed. Harmonic load-flow calculations are provided to indicate potential voltage distortion problems. A simplified methodology, suggested in relevant IEC publications, is applied to the system and its results are compared to those of the harmonic load flow. A discussion on the summation of harmonic currents within a wind farm is also included. Index Terms--Harmonics modeling, power system harmonics, summation of harmonics, wind turbines.

Autonomous power systems, such as those existing in small and medium-size islands, typically consist of medium voltage networks fed by conventional power stations and present characteristics not typical for large interconnected grids. In this paper, results are presented and analyzed from a power-quality measurement campaign, conducted in a diesel-powered island system with significant wind penetration. Emphasis is placed on the voltage flicker, which was found quite increased under all operating conditions. It is shown that the diesel engines of the conventional power station are the main source of flicker in the system, due to the pulsed variation of their torque. The operation of the wind farms, on the other hand, does not result in any notable deterioration of the voltage quality level in the system. Index Terms--Diesel-driven generators, flicker, power quality, wind power generation.