Search

This article develops magnetic dipole moment models based on Maxwell's equations for inductor's near magnetic field evaluation and reduction in power electronics systems. In the developed model, the near magnetic field source of an inductor is composed of the magnetic dipole moments from the winding and the air gaps. The superposition of the magnetic dipole moments determines the near magnetic field. The developed model can be easily applied to inductors with different winding and air gap configurations, such as those with lumped or distributed air gaps, for near magnetic field assessment and reduction. Simulations and experiments are conducted to validate the developed theory. [ABSTRACT FROM AUTHOR]

This article first develops a radiated electromagnetic interference (EMI) model for a gallium nitride (GaN) integrated circuit (IC)-based active clamp flyback converter. Important capacitive couplings, which play a big role in the radiated EMI, are identified, extracted, and validated in the converter. The radiated EMI model is improved to characterize the impact of capacitive couplings. Based on the improved model, techniques to reduce capacitive couplings and the radiated EMI are proposed and experimentally validated. [ABSTRACT FROM AUTHOR]

This paper investigates the magnetic field immunity and near magnetic field reduction for different inductor-winding structures. A double-twisted winding structure, which includes two magnetic cores, is proposed for common mode (CM) inductors. The proposed CM inductor can achieve much lower near magnetic field emission, much better magnetic field immunity against the external magnetic field, and much bigger differential mode (DM) impedance than conventional winding structures. The proposed inductor structures are good for high power-density applications. Theoretical analysis, magnetic three-dimensional simulations and experiments were conducted to validate the developed theory and technique. [ABSTRACT FROM AUTHOR]

For isolated dc–dc power converters, the interwinding parasitic capacitance of the transformer is usually one of the main paths for common-mode (CM) noise. In order to simplify the CM noise analysis, this paper proposes a two-capacitor transformer winding capacitance model. The model is derived based on general conditions so it can be applied to different isolated converter topologies. A measurement technique is also proposed to obtain the lumped capacitance for the model. The CM noise models of several isolated converter topologies are analyzed with the proposed two-capacitor transformer winding capacitance model to achieve simplicity. Finally, the proposed transformer winding capacitance model and measurement technique are verified by simulations and experiments. [ABSTRACT FROM AUTHOR]

Hybrid electromagnetic interference (EMI) filters (HEFs), which are composed of an active filter and a passive filter, have been proposed to reduce the size and weight of conventional passive EMI filters in literatures. However, accurate models that can be used to predict the stability and performance of HEFs have not been developed. To cope with this, this paper presents a modeling technique for a hybrid common-mode (CM) filter. The technique can be applied to the modeling of other HEFs. Critical component models were first developed for the HEF. HEF's overall model was further developed based on these individual component models. Experimental results validated that the developed model can successfully predict the stability and performance of active/hybrid CM filters. [ABSTRACT FROM AUTHOR]

This paper proposes a stacked common-mode (CM) inductor for electromagnetic interference (EMI) attenuation. The proposed stacked CM inductor consists of two CM inductors with identical cores and the same number of winding turns but with opposite winding directions. The proposed stacked CM inductor has three advantages. First, it is much less susceptible to external magnetic field interference than conventional CM inductors. This suppresses the EMI due to the near-magnetic-field coupling to the CM inductor. Second, the proposed winding structure effectively increases the leakage inductance of the CM inductor, which enhances its ability to suppress differential-mode (DM) noise. Third, the magnetic field generated by the DM current in the stacked CM inductor is partially canceled outside of the inductor. As a result, the stacked CM inductor has lower magnetic field emission than that of a conventional CM inductor. Simulation and experimental results validate the advantages of the proposed CM inductor, which show the proposed technique greatly improves the performance of CM inductors. [ABSTRACT FROM AUTHOR]