Search

This article proposes a method of generating 24-sided polygonal voltage space vector structure composed of 24 real active vectors and a zero vector. Each active vector is a real vector in contrast to switched average vectors in literature. Generation of real 24-sided vectors minimizes switching losses and improves quality of phase voltage compared to switched averaged vectors technique. An important feature of the presented scheme is elimination of lower order harmonics up to 19th order from motor phase voltage throughout the modulation range that gives reduction in torque pulsation and near sinusoidal phase current. The proposed scheme extends the linear modulation range till 99.42 $\%$. Open-end winding induction motor is fed with primary and secondary inverters from either ends. Primary and secondary inverters are implemented by cascading two-level inverters. DC sources for both the inverters are realized using a simple star-delta transformer combination. The proposed concepts are verified with laboratory prototype and the respective results during the steady-state, transient, and fault scenario are presented. The supporting loss analysis and harmonic performance of the proposed drive is performed with existing topologies. [ABSTRACT FROM AUTHOR]

Modulation using a higher sided polygonal space vector structure (SVS) is an elegant method to increase the linear modulation range and to eliminate the undesired lower order harmonics from motor phase voltage. This article presents the generation of a dense 15-concentric 30-sided multilevel SVS using a single dc-link for an open end induction motor (OEIM) drive. The proposed scheme eliminates lower order harmonics till 25th order from motor phase voltage throughout the modulation range. The $dv/dt$ stress in the phase voltage applied to the motor will also be highly reduced owing to the multilevel structure. The pulsewidth modulation scheme employed utilizes the denseness of SVS and avoids iterative searches to find the triangle, which encompasses the tip of reference voltage vector, which are typical in multilevel polygonal SVS. The topology consists of an active dc-link fed three-level primary inverter and a capacitor fed five-level secondary inverter connected to either end of an OEIM. The primary inverter acts as the active power supplier for the drive and the secondary inverter filters out the undesirable lower order harmonics from motor phase voltage. The proposed scheme is experientially validated and the results are included in this article. [ABSTRACT FROM AUTHOR]

This article introduces a hybrid nine-level inverter topology with extended dc-bus utilization for operation at over modulation range without the presence of lower order harmonics (predominantly fifth and seventh) when compared to conventional two-level and multilevel inverter with hexagonal voltage space vector structure. The proposed inverter is a cascade of a five-level T-type unit and an H-bridge (HB) unit. An increase in the dc-bus utilization is possible by increasing the pole voltage levels to ± (Vdc/2 + Vdc/8) using the HB capacitor voltage and also the capacitor voltages are balanced by adding a offset to sine reference. The aforementioned pulsewidth modulation strategy allows us to increase the peak phase fundamental voltage from 0.577Vdc to 0.625Vdc in case of unity power factor (p.f) load and to 0.637Vdc for 0.82 p.f load with the proposed nine-level inverter. The limiting factor on increasing the dc bus utilization such as p.f, HB capacitor balancing are analysed broadly in this article. The proposed inverter scheme and its claim of increasing the peak phase fundamental voltage is experimentally validated in a laboratory prototype. [ABSTRACT FROM AUTHOR]