Search

To realize a soft-switching inverter with the advantages of a simple structure, high efficiency, low-voltage stress, and easy to control, a novel parallel resonant dc-link inverter with the function of pulse current regeneration is proposed in this paper. All switches in the inverter main circuit can achieve zero-voltage switching (ZVS) turn-on and ZVS turn-off. In addition, all switches in the auxiliary commutation circuit (ACC) can achieve soft switching. The power in the ACC is small. Freewheeling diodes in the inverter turn off under zero current condition, which can reduce the reverse recovery loss of freewheeling diodes. In addition, the bulk capacitors are avoided in the circuit and there is no neutral point potential variation problem. At the same time, the zero-voltage duration is independent of the load current, and the time of transition can be selected freely. According to the equivalent circuits in different operation modes under the proposed modulation strategy, the operation principle, soft-switching implementation condition, and parameter design procedure of the proposed inverter are analyzed successively in this paper. Finally, a 10 kW, 10 kHz soft-switching inverter prototype with insulated gate bipolar transistor based switches is built. Experimental results are given to demonstrate the validity and features of the soft-switching inverter. [ABSTRACT FROM AUTHOR]

This paper presents an enhanced current controller for improving the performance of a class of single-phase grid-connected inverters operating in weak and distorted grid conditions. An inverter designed to operate at normal (strong or stiff and clean) grid conditions may not perform satisfactorily during weak and distorted grid conditions. One major reason is the interfering dynamics of the synchronization or phase-locked loop (PLL). This paper proposes an enhanced control structure for a popular class of single-phase inverters to address this problem. The proposed idea is to include the PLL state variables into the main inverter controller thereby minimizing the undesirable interactions of the PLL with the other components. A method for optimally designing the controller gains is also proposed. Compared to the conventional one, the proposed controller is shown to have a more robust performance over a substantially wider range of weak and distorted grid conditions. Extensive simulation and experimental results are presented to validate the proposed controls. [ABSTRACT FROM AUTHOR]

Capacitor-current-feedback active damping has been widely used in LCL-type grid-connected inverters. However, the damping performance is deteriorated due to the negative equivalent resistance resulted by the digital control delays, and thus the grid-connected inverter is apt to be unstable under the grid impedance variation. To address this issue, this paper proposes the capacitor-current proportional-integral (PI) positive feedback active damping method that can ensure a positive equivalent resistance almost within the Nyquist frequency, i.e., the full controllable frequency range. In theory, the proposed damping method can be implemented by feeding back the capacitor current through a PI function. However, the integral term will continuously accumulate the noise and dc bias arising from the feedback signal. To overcome this drawback, a more practical implementation solution is drawn in this paper. Furthermore, a straightforward design procedure is presented for the convenience of selecting the proper controller parameters. With the proposed damping method and its practical implementation, high inverter robustness against the grid impedance variation can be achieved. Experiments are performed on a 6-kW prototype and the experimental results are in well agreement with the theoretical expectations. [ABSTRACT FROM AUTHOR]

In modern power systems, the increasing penetration of renewables and power electronics, particularly inverter-based wind and solar power generation, is altering power system dynamics and bringing new stability concerns. One challenging issue that is attracting considerable attention is the wide range of power oscillations associated with multiple parallel grid-connected inverters. In such systems, the characteristics in terms of resonance and oscillation are significantly different from single-inverter systems. This paper investigates the mutual interaction and stability issues of multiple grid-interfacing inverters with LCL-filters in power-electronics-based power systems under various grid conditions. The investigation reveals that such interactions between power inverters and the grid may excite multiple resonances at various frequencies under certain grid conditions. The nodal admittance matrix concept, which was originally from power systems engineering, is adopted here. Moreover, this paper further develops an Interaction-Admittance model that can effectively describe these mutual interactions in terms of a physical network admittance. We apply our model to various scenarios such as stiff grid conditions and inductive grids with/without power factor correction capacitors. The results with the proposed framework demonstrate an intuitive interpretation of multi-inverter system resonance and instabilities. Finally, simulations and experiments on a lab-scale system are provided to verify the theoretical analysis. [ABSTRACT FROM AUTHOR]

The instantaneous output power of the two-stage single-phase grid-connected photovoltaic (PV) inverter pulsates at twice the line frequency ($2f_{{\text{o}}}$), generating second harmonic current (SHC) in the front-end dc–dc converter and PV panel, which will affect the maximum power point tracking operation and deteriorate the overall conversion efficiency. The generating mechanism of the SHC is analyzed in this paper and it is pointed that in order to eliminate the SHC in the front-end dc–dc converter and PV panel, the voltage loop gain of the front-end dc–dc converter should be high enough at $2f_{{\text{o}}}$. Since there is a −180° phase abrupt at the resonant frequency of the input side filter capacitor and the inductor, the system may be unstable. To cope with this problem, the inductor current feedback active-damping scheme (ADS) is adopted. For further improving the loop gain at $2f_{{\text{o}}}$ , proportional–integral–resonant regulator with ADS (PIR + ADS) is proposed in this paper. Besides, a step-by-step closed-loop parameters design method is presented. Finally, a 3-kW two-stage single-phase grid-connected PV inverter has been fabricated and tested, and the experimental results verify the feasibility of the proposed control schemes. [ABSTRACT FROM AUTHOR]

This paper proposes a novel method to determine and control active and reactive power output of the virtual ocillator control-based inverter in grid-connected mode. An analytical expression is introduced to describe the quasi-steady-state relationship between the parameters of the inverter including its controllers, and the power injection and voltage at the inverter terminals. We introduce a new, complex valued parameter (K) to the conventional virtual oscillator control (VOC) scheme in order to control the inverter output power. We compare analytic and numeric solutions of the above analytical expression with time-domain simulation results, using different K values and line impedances to validate the analytical expression. In the second part of the paper, we design a controller: we use the above expression to derive K for given reference powers and use adaptive integrators to compensate for the remaining errors. We compare this control scheme to a method that uses PI controllers, and also to a simple decoupling method for independent control of active and reactive power. The controller based on the analytical method exhibits very good dynamic and decoupling performance. A single VOC-controlled inverter connected to a nonstiff grid is simulated in MATLAB/Simulink for demonstration, and is also validated using real-time simulations. [ABSTRACT FROM AUTHOR]

In this paper, a generalized droop control (GDC) is proposed for a grid-supporting inverter based on a comparison between traditional droop control and virtual synchronous generator (VSG) control. Both the traditional droop control and VSG control have their own advantages, but neither traditional droop control nor VSG control can meet the demand for different dynamic characteristics in grid-connected (GC) and stand-alone (SA) modes at the same time. Rather than using a proportional controller with a low-pass filter, as in a traditional droop control, or fully mimicking the conventional synchronous generator parameters in a VSG control, the active power control loop of the GDC can be designed flexibly to adapt to different requirements. With a well-designed controller, the GDC can achieve satisfactory control performance; unlike a traditional droop control, it can provide virtual inertia and damping properties in SA mode; unlike a VSG control, the output active power of an inverter with GDC can follow changing references quickly and accurately, without large overshoot or oscillation in the GC mode. Moreover, given specific controller parameters, the GDC can function as both a traditional droop control and a VSG control. The GDC's controller parameter design is more intuitive and flexible, and this paper provides a distinct design process. Finally, the effectiveness of the proposed control method is validated by the simulation and experimental results. [ABSTRACT FROM AUTHOR]

A non-segmented PSpice model of silicon carbide metal-oxide semiconductor field effect transistor (SiC mosfet) with temperature-dependent parameters is proposed in this paper, which can improve the model's convergence and temperature characteristics. The non-segmented equations and the parameter-extraction method for the proposed SiC mosfet PSpice model are introduced first. Simulation and experiment results are given to verify the correctness of the model while considering the temperature-dependent parameters. The static characteristics of the model are verified by comparing the simulation curves with the static characteristic curves in the SiC mosfet's datasheet, and its dynamic characteristics are verified by comparing the simulation results with experimental results under different ambient temperatures (25, 75, and 125 °C) based on a double-pulse test platform. Moreover, the proposed non-segmented model, the conventional segmented model, and the model from the manufacturer are adopted and simulated in a full-bridge inverter. The simulation results show better convergence of the proposed non-segmented model. Therefore, an accurate and practical simulation model of SiC mosfet is provided for circuit design in this paper. [ABSTRACT FROM AUTHOR]

A new controller for a grid-connected inverter with an LCL filter is proposed in this paper. The system is described by its complex representation, and the controller is designed using the complex root locus method. The complex representation allows a considerable reduction in the order of the system, simplifying the design task and making it possible to use advanced techniques, such as the complex root locus. The new complex controller adds an extra degree of freedom that makes it possible to move the poles of the systems and to improve the stability and speed of response compared with the conventional controls. This paper includes a detailed discussion of the effect of the gains of the controller on the root locus. The proposal is validated with simulation and experimental results. [ABSTRACT FROM AUTHOR]

This paper analyzes the influence of phase-locked loop (PLL) on the stability of LCL-type single-phase grid-connected asymmetrical cascaded H-bridge multilevel inverter (ACHMI) with synchronous reference frame proportional-integral (SRF-PI) grid current control under weak grid scenarios. The ACHMI system is composed of power stage circuit and control system, where the control system contains the dual-loop current control strategy established in the hybrid reference frame, the SRF-PLL, and the hybrid modulation method employed to synthesize the multilevel output voltage. The small-signal model of the whole ACHMI system is first established by using a simple step-by-step derivation method, and then, the small-signal analysis method is adopted to linearize the ACHMI, which is then utilized to derive the impedance model of the ACHMI system. Furthermore, an improved impedance stability criterion is derived, which is then employed to analyze the system stability. By using this criterion, the stability of the ACHMI can be evaluated with the variation of the bandwidth of PLL, the output power factor angle of the ACHMI, and the amplitude of the grid current reference signal under weak grid conditions. In this paper, a systematic design procedure for the optimal selection of the PI controller of the PLL is presented, which guarantees the steady-state performance and dynamic response of the ACHMI system. With this design method, the dual-loop current control and PLL can be taken into account simultaneously when analyzing the stability margin of the ACHMI. Finally, the simulation and experimental results from a down-scaled grid-connected ACHMI prototype system are provided to confirm the validity of theoretical analysis. [ABSTRACT FROM AUTHOR]

Enhancement of dc bus voltage utilization for a five-level inverter with single dc source and capacitor-fed H-bridge (CHB) units is investigated in this paper. A carrier-based modulation technique is used for boosting the dc bus utilization, which is established by providing detailed mathematical analysis. The five-level inverter used here is realized by cascading a CHB unit to each phase of a three-level neutral point clamped inverter. The increase in dc bus voltage utilization owes to the pole voltage redundancies offered by CHB units. The floating capacitors of H-bridge units are balanced within a quarter fundamental cycle using the switching state redundancies of pole voltage levels. The aforementioned modulation technique allows the inverter to enhance the dc bus utilization from 0.577 $\text{V}_{\text{dc}}$ to 0.63 $\text{V}_{\text{dc}}$ under unity power factor. This enhancement is obtained in the linear modulation range without increasing the dc bus voltage, and thus, the inverter can operate without the presence of low-order harmonics in its phase voltages. The strength of this paper lies in its detailed mathematical analysis for finding out the limiting modulation index and power factor condition in the light of floating capacitor voltage balancing issue. Simulation as well as experimental verification of the modulation scheme is carried out on an induction motor drive under various operating conditions. It is shown that this carrier-based modulation technique is suitable for any single source inverter topology with one CHB unit per phase. [ABSTRACT FROM AUTHOR]

This paper proposes a novel method for instantaneous balancing of neutral-point (NP) voltages with stacked multilevel inverters (MLIs) for variable-speed drives. The stacked MLI uses series-connected dc sources and NPs (connecting points of dc sources) to obtain the desired levels. The balancing of NP voltages are obtained by using a low-voltage-capacitor-fed cascaded H-bridge (CHB) per phase of a symmetrical six-phase induction machine (IM), which ensures zero current drawn from NPs (at any given instant). Since no current is drawn from NPs, the single dc-link operation with stacked capacitors is also possible. The scheme is suitable for applications, where low-voltage dc sources and batteries are stacked to form a dc link. A variable-speed operation is done using a seven-level inverter scheme for a symmetrical six-phase IM, which is formed by three dc-link stacked capacitors cascaded with two low-voltage-capacitor-fed CHBs per phase. Furthermore, the method is extended for an open-end IM to obtain a seven-level common-mode eliminated space vector structure using a single dc link. The generalization of this method for any stacked $n$ -level inverter without NP voltage deviation is also presented in this paper. The experimental results and analysis are included to validate the proposed method. [ABSTRACT FROM AUTHOR]

Soft magnetic powder cores with their high saturation flux density and low core loss are excellent alternatives for filter inductors in inverter-based applications. However, their nonlinear current-dependent inductance characteristics pose a challenge for control of grid-connected inverter with LCL filter. In this paper, the variable inductance conundrum is discussed and a modified direct digital control method based on a variable-structure inductance estimation model that takes into consideration wide nonlinear variation in both inverter- and grid-side inductances is proposed. The proposed method is shown to have better grid-voltage harmonic rejection and improved stability margins. However, investigation of stability which is conventionally based on nominal values of filter inductors cannot predict instabilities over the entire range of inductance variation. Hence, a parametric approach to conventional stability methods with a parameter space defined by variation in actual and estimated inductance is explored in this paper. The effect of line impedance on stability is also investigated with impedance-based stability criterion by considering line inductance as an additional dimension in the parameter space. A pattern in stability margins is observed due to inductance variation, with inductance at its minimum being most vulnerable to instability. Experimental results measured from a 5 kW single-phase grid-connected inverter with various LCL filters have verified the feasibility of the proposed control method. The experimental results also match the analytical results with reasonable accuracy. [ABSTRACT FROM AUTHOR]

This paper proposes a high-efficiency single-phase T-type boundary conduction mode (BCM) microinverter. The conventional full-bridge BCM microinverter has achieved zero voltage switching (ZVS) and thereby improved the efficiency, but it suffers from high switching losses under light load conditions. The proposed T-type BCM microinverter reserves ZVS and uses a multilevel technique to further decrease the switching losses. The BCM operation with multilevel technique will have too low switching frequency when the grid voltage approaches half of the dc link voltage. To solve this problem, this paper adopts a third operation mode for the T-type switching leg to maintain the switching frequency above a minimum value. The corresponding mode transitions are also detailed to ensure a smooth operation. Because of the turn-offdelay of the freewheeling transistor, the actual lower current boundary deviates from the programmed one, which will distort output current. To address this issue, this paper also proposes a boundary compensation method. A prototype has been built for performance verification, which can test both full-bridge and T-type topology. Compared with the full-bridge BCM microinverter, the proposed T-type BCM microinverter has a higher efficiency over the whole load range. [ABSTRACT FROM AUTHOR]

This paper presents the digital implementation of a boundary controller with unipolar switching characteristic for single-phase voltage source full-bridge inverters. This paper expands the application of a second-order switching surface-based control method to unipolar switching of single-phase voltage source inverters (VSIs) using a finite-state machine. The finite-state machine has been formulated considering four different states of the inverter; positive,zero1, negative, andzero2. The second-order boundary control governs the current state of the system and provides proper switching action to keep the system within the desired reference. The control law is implemented digitally in F28m35x digital control card. A full-bridge inverter topology is used to achieve the three-level voltage switching. Various simulations and experiments were performed in a 550 VA, 120 V, 60 Hz VSI with a digitally implemented controller to verify the theoretical predictions. A high-quality voltage output was obtained for various loading conditions. The transient performance of the controller was investigated using a reference and load changes. A comparison of the implementation was made with the existing classical controllers to verify the fast-dynamic response of the system. [ABSTRACT FROM AUTHOR]

This paper proposes a split-capacitor four-wire current source inverter, which is the dual of the split-capacitor four-wire voltage source inverter. Since the midpoint of the dc link is tied to the neutral point of ac filter capacitors, the common-mode voltage (CMV) is reduced significantly. Consequently, the leakage current issue is effectively addressed. The proposed circuit is cost-effective as no extra switch is added. This paper, first, establishes the equivalent common-mode circuit of the proposed inverter. The impact of the neutral line inductance on CMV is also analyzed. Then, a specific modulation is introduced to balance the dc-link voltages/currents. To achieve good input/output performance, a nonlinear control method is developed based on time-domain models. Finally, all the proposed methods and related theoretical analysis are verified by simulations and experimental results. [ABSTRACT FROM AUTHOR]

This paper introduces a new bidirectional single-phase inverter topology. The proposed topology has three ports: a dc port, an ac port, and a ripple port. The ac and dc ports are bidirectional to support rectifier or inverter operation. A small inductor, which is of alternating current, exchanges power between different ports of the single-phase system. The proposed topology is capable of accomplishing voltage step-up or step-down, suppressing the ripple power, and performing inversion or rectification operation in one stage of power conversion. The proposed configuration offers an active decoupling function, which not only eliminates the double-frequency ripple power at the dc port but also achieves minimum capacitance requirements to minimize the size of the decoupling capacitor. This facilitates the use of a very small thin-film capacitor, which offers a much longer life-cycle and higher reliability compared with a bulky electrolytic capacitor. A control approach is also developed to regulate the dc-port and ac-port currents and manage the ripple power through proper distribution of power between each port. Moreover, a very small capacitor can be placed in parallel with the inductor to reinforce the proposed configuration with soft-switching operation, which enhances the overall efficiency and minimizes the voltage stress over the semiconductor devices. This converter is capable of accommodating an arbitrary number of dc or single-phase ac sources and/or loads configuring a multiple-input multiple-output inverter without introducing any additional passive elements or sacrificing the performance of the inverter. The primary focus of this paper is dc-to-ac conversion mode of operation, in spite of the fact that it can easily be configured to serve as a rectifier. Experimental and simulation results are presented to validate the operation of the proposed topology and its control strategy. [ABSTRACT FROM AUTHOR]

This paper proposes a novel discontinuous pulse-width modulation (DPWM) method to reduce the current harmonics and improve the system efficiency for a single-phase three-level neutral-point clamped inverter. In single-phase inverters, the unipolar pulse-width modulation (UP-PWM) method is commonly used. However, this method has the disadvantage of power losses due to numerous switching operations. Conventional DPWM methods reduce the power losses and improve efficiency but increase the current total harmonic distortion (THD). To overcome these weaknesses, this paper proposes a hybrid DPWM switching method combining two PWM methods: the UP-PWM method and the conventional DPWM method called one-pole clamped PWM method. Since the proposed DPWM method offers all the advantages of both PWM methods, the optimal performance—with regard to the power losses and current THD—is obtained. The combination of two PWM methods is investigated by analyzing the power losses and current THD. Based on the analysis, the process determining the optimal operating condition is introduced. The effectiveness of the proposed DPWM method is demonstrated through simulations and experiments. [ABSTRACT FROM AUTHOR]

This paper presents a novel platform for accurate mathematical modeling of the propulsion system of electric cars. It provides, for the first time, a hardware-in-the-loop (HIL) real-time experimental verification case study of a General Motor Chevrolet Volt for power, control systems, and the mechanical systems. The contribution of this paper can be categorized into three approaches: First, each component of the powertrain is accurately modeled taking transient dynamics of all components of the electric vehicle into consideration. Further, a PSIM simulation platform is consequently developed to demonstrate the validity of this mathematical modeling. Finally, the Typhoon HIL is used to provide the experimental verification of the proposed model in real time, which precisely validates the viability of the model. HIL technology is used to prototype and test the proposed control system while simulating the power circuit on the HIL module platform. The permanent magnet synchronous motor and the power electronics hardware components are simulated in real time at which the parameters can be changed during the simulation. However, the control algorithm is generated as a C code and downloaded to the TI controller that exists on a digital signal processing board. The results from the simulation based on PSIM environment and hardware validations using HIL are in agreement, which validates the developed model. The performance has been investigated under different load operating conditions in real time to verify its robustness. The case study can be extended for any electric car as it provides a generic platform for modeling any propulsion system. [ABSTRACT FROM AUTHOR]

This paper proposes a new high-efficiency photovoltaic (PV) converter for grid connection through a high-leg delta transformer. The converter is composed of a symmetrically connected boost converter and three half-bridge inverters. One of the three half-bridge inverters is connected to the boost converter, and the others are directly connected to the PV terminals. As a result, this circuit configuration enables to reduce the power losses in both boost converter and inverters. This paper also proposes a new cooperative control method between the symmetrically connected boost converter and inverter. The control method can reduce the average switching frequency to 75% of that in a conventional one, resulting in a great reduction in the switching power loss. Experimental results confirm that the proposed circuit configuration makes it possible to improve its European efficiency from 91.6% to 94.5%. Moreover, system performance is evaluated on the assumption of maximum power point tracking operation. [ABSTRACT FROM AUTHOR]

This paper comprehensively analyzes the stability of a grid-interfacing inverter with the LCL -filter in the discrete domain, where the LCL-filter, along with the controller, is modeled in a polar coordinate. System open-loop and closed-loop poles are analytically studied and expressed in the z -domain. Through the poles movement and distribution analysis, the relationship between system stability and the ratio of resonance frequency over sampling frequency is mathematically revealed and calculated as well as the system control gain limit. Moreover, this paper demonstrates that a grid-voltage feedforward regulator would significantly alter the inverter stability in a weak power system. By means of Jury stability criterion, the stability status under different filter resonance frequency is given. The selection of resonance frequency and filter parameters makes a considerable difference on system behavior. Finally, to improve the robustness against grid inductance variation, a conservative design recommendation of filter parameters and control gain is given. Through the tests on a laboratory-scale prototype, the theoretical analysis is validated by experimental results. [ABSTRACT FROM AUTHOR]

This paper presents an inverter topology named the multi-source inverter that aims to connect several independent DC sources to the same AC output using a single stage of conversion. This power converter has been developed for applications, such as electrified powertrains. Compared to the conventional hybrid powertrains that use a DC/DC converter to provide an adaptable voltage to the load, the multi-source inverter can drive a traction motor from variable DC voltages without the use of an additional power converter. Hence, the high power DC/DC converter can be dissociated from the traction mode and its use will be restricted to the engine $^{\prime }$ s start-up and regenerative braking, allowing a significant reduction of its power rating from tens of kWatts to a few kWatts. The overall efficiency of the electrified traction drive can also be improved due to the single conversion stage between the battery and the motor. In this paper, the multi-source inverter topology is introduced and its different operating modes are determined through the study of the inverter circuit. Closed-loop control simulations and experiments with a scaled-down prototype and an induction motor were performed to validate the effectiveness of the proposed topology and concept. [ABSTRACT FROM AUTHOR]

This paper proposes generation of a 15-level (14 concentric) dodecagonal voltage space vector structure (DVSVS) for a star connected induction motor drive. The proposed multilevel DVSVS is obtained by cascading two inverters, namely a primary and secondary inverter. The primary inverter is a five-level (5L) structure formed by stacking two three-level flying capacitors with individual reduced dc sources and the secondary inverter is also a 5L structure formed by cascading two capacitor-fed cascaded H-bridges (CHB). The active power is supplied by the primary inverter, while the secondary inverter acts as switched capacitor harmonics filter, and capacitors in the secondary inverter are balanced naturally irrespective of load power factor for entire modulation index. The high-voltage dc supply fed primary inverter is operated in quasi-square wave mode, while the high frequency switching is applied to low voltage CHBs, thus, reducing the overall switching loss. The proposed scheme gives the advantages of both DVSVS and multilevel structure, thus, making it one of the solutions for battery or stacked dc-fed applications. The paper also presents the experimental results as well as comparison study with the existing topologies to support the advantages of proposed scheme. [ABSTRACT FROM AUTHOR]

This paper proposes a hybrid electronic and magnetic structure named a variable-inverter-rectifier-transformer (VIRT) that enables a transformer with fractional and reconfigurable effective turns ratios (e.g., 12:0.5, 12:2/3, 12:1, and 12:2). This functionality is valuable in converters with wide operating voltage ranges and high step-up/down, as it offers a means to reduce the turns count and copper loss within the transformer while also facilitating voltage doubling and quadrupling. These properties are especially beneficial for miniaturizing the transformer stage in many power electronics applications, such as universal serial bus wall chargers. We introduce the principle of operation of the structure and present models for its magnetic and electrical behavior. The instance of VIRT described in this paper comprises four half-bridge switching cells distributed around a planar magnetic core and connected to two “half-turns” wound through that core. By controlling the operating modes of the half-bridge cells, we gain control over the flux paths and current paths used in the transformer, and this hybridization enables fractional and reconfigurable effective turns ratios. An experimental prototype integrates the VIRT with a stacked-bridge LLC converter to accommodate a widely varying input (120–380 \textV\text{dc}) and output (5–20 \textV\text{dc}), and VIRT is shown to be highly beneficial in keeping efficiency high over this wide output voltage range. [ABSTRACT FROM AUTHOR]

This paper presents a generalized power-decoupling control scheme using a multiport isolated bidirectional converter for a multilevel inverter, which has multiple dc links inside. In the proposed method, a single power-decoupling capacitor is needed for all the dc links in the multilevel inverter cell. First, a prototype of the power-decoupling concept of individual H-bridge cells in the multilevel inverter is proposed, using a separate power-decoupling circuit. Then, a more advanced one-step power-decoupling method is proposed. The lifetime and reliability of the multilevel inverter is improved as film capacitors replace the large capacitance electrolyte capacitors. A multi-input ports/single output voltage-fed dual half-bridge converter (MDHB) is used for the power-decoupling circuit. A steady-state analysis for the peak and root mean square of the MDHB current is carried out for the loss breakdown. The currents are functions of the switching frequency, phase shift, leakage inductance, turn ratio, and output voltage, which make the multiport transformer design complex. A design methodology is proposed, which takes into account the design of the copper and core losses as functions of the switching frequency and number of turns. Furthermore, a special winding method for the input port is illustrated to obtain identical leakage inductances for the uniform current distribution in the multiport transformer. The proposed MDHB employs a current-sensorless power-decoupling control that contributes to the spontaneous ripple rejection of all the dc links without individual link current information, as well as to the cost and size reduction. Hence, the ripple-rejection controller is independent of the control configuration of the multilevel inverter, and also available for universal applications of various inverter topologies. Since the primary-input ports of MDHB share a single magnetic core for interfacing the ripple power to the unified secondary ripple capacitor, the controller design becomes difficult in considering the dynamic interaction among the ports, along with the average-voltage control loop design. In this paper, the dynamic analysis and controller design procedure of the circuit is also presented. The power decoupling is achieved even when the ripple frequency is other than the double frequency of the inverter output, since the single-pole transfer function of the small-signal model of the MDHB allows sufficient phase margin, along with high bandwidth. The proposed power-decoupling method for the multilevel inverter is validated with the help of simulation and 1.2-kW hardware prototype experimental results. [ABSTRACT FROM AUTHOR]

This paper proposes a variable off-time control method for a single-phase microinverter operating in the discontinuous conduction mode (DCM) for efficiency improvement. First, the fixed off-time control method is analyzed. The concept is to fix the off-time of the active switch throughout a line cycle for all output powers and scale the on-time of the active switch to shape a sinusoidal output current. Then, based on the fixed off-time control method, a variable off-time control method is proposed to modulate the preset fixed off-time in order to decrease the switching frequency during ac line zero-crossings and light load conditions. Compared with existed fixed-frequency DCM control or boundary conduction mode control, the variable off-time control is more flexible to optimize the efficiency under different load conditions as the switching frequency range can be automatically adjusted according to the output power. The switching frequency is high at heavy loads to limit the maximum peak current and is low at light loads to increase the light load efficiency. In addition, a predictive on-time method is adopted to simplify inverter control and reduce hardware costs. The parameter design principle is detailed in this paper. A 300 W prototype is built to verify the performance of the proposed method. [ABSTRACT FROM AUTHOR]

In power electronics, the $\ell _1$-norm (instead of the squared $\ell _2$-norm) is often used in the objective function of model predictive controllers (MPCs) with reference tracking. Although the $\ell _1$-norm is preferred for its computational simplicity, it might lead to a performance deterioration and closed-loop instability. This paper analyzes the root cause for this and discusses the benefits of using the $\ell _2$-norm instead. Given the theoretical nature of this paper, a power electronics-oriented case study is employed to visualize and exemplify—through examples and simulations—the mathematical concepts and arguments presented. To this end, a variable speed drive system with a three-level voltage-source inverter serves as an illustrative example to clearly demonstrate the effectiveness of using the $\ell _2$-norm. [ABSTRACT FROM AUTHOR]

This paper proposes a new single-phase single-stage switched-boost inverter with four switches. Like the quasi-Z-source inverter and quasi-switched boost inverter (qSBI), the proposed inverter has the main features as continuous input current, buck/boost voltage with single-stage conversion, and shoot-through immunity. Compared to the qSBI, the proposed inverter uses one more capacitor and one less switch. This paper presents the operating principles, pulse-width modulation control strategy, parameter design guidelines, and simulation results for the proposed inverter. To verify the performance of the proposed inverter, an 800-W prototype was built with an 110 V/50 Hz output voltage in stand-alone and grid-connected modes. The simulation and experimental results matched those of the theoretical analysis. [ABSTRACT FROM AUTHOR]

This paper proposes a new type dc/ac inverter named: hybrid-coupling grid-connected inverter (HGCI) for photovoltaic active power generation with power quality conditioning, which consists of a full-bridge three-phase dc/ac inverter coupling to the power grid in series with a thyristor-controlled LC filter. Compared with the conventional inductive-coupling grid-connected inverter (IGCI) and capacitive-coupling grid-connected inverter (CGCI), the proposed HGCI has distinct characteristics of wide operational range and low dc-link operating voltage. Based on these prominent characteristics, the system cost and operational cost can be reduced. Moreover, it can transfer the active power and compensate reactive power, unbalanced power, and harmonic power simultaneously. In this paper, the analysis of the structure, parameter design, and control method of the HGCI is proposed and presented. Finally, simulation and experimental results are provided to verify the effectiveness and performance of the proposed HGCI in comparison with the IGCI and CGCI. [ABSTRACT FROM AUTHOR]

Fast-switching power converters are a key enabling technology for the more electric aircraft (MEA), but the generated electromagnetic interference (EMI) poses significant challenges to the electrification effort. To meet the stringent aerospace EMI standards, passive filters are commonly employed, despite the weight and size constraints imposed by the MEA. Alternatively, the EMI source, i.e., the high dv\text/ dt and di\text/ dt slew rates, can be addressed through waveform-shaping techniques. For example, while most soft-switching converters can reduce switching loss, they do so by switching the semiconductor devices in a slower and smoother manner, resulting in the attenuation of high-frequency harmonics. This paper examines the auxiliary commutated pole inverter (ACPI) topology, and its first contribution is the attenuation of the high-frequency content of its EMI source, that is, the output voltage, in a predictable manner, through the active control of the resonant circuit. This is achieved by first, discussing the time-domain characteristics of trapezoidal and S-shaped pulse-trains that lead to attenuated high-frequency harmonic content, and second, by analyzing the equivalent LC circuit of the ACPI. The design of the inverter is then focused on the active control of the resonant parameters, for a predetermined and enhanced output voltage high-frequency response. The second contribution of this paper is the comparison of the EMI performance of hard switching and of three soft-switching modes, fixed-timing control, variable-timing control, and capacitive turn-offs, and how this informs important metrics such as power efficiency, current stress, and implementation complexity. Finally, the third contribution is on the trade-offs that arise when the primary design goal is enhanced EMI performance as opposed to switching loss reduction. A 5-kW, 3-phase ACPI prototype is used for validating the high-frequency content attenuation at source. It is shown that the ACPI can achieve a 37 dB harmonic attenuation of its output voltage at 4 MHz, compared to a hard-switched inverter. [ABSTRACT FROM AUTHOR]

To support the development of high-frequency ac microgrids in terms of compact design, high-voltage gain and low total harmonic distortion (THD), a buck–boost dual-leg-integrated step-up inverter is proposed in this paper. The inverter is formed by integrating a buck–boost converter into a conventional single-phase full-bridge inverter by sharing the upper switch and the body diode of the lower switch in both bridge-legs. Consequently, the component count is significantly reduced over the step-up inverter counterparts. In addition, to address the drawbacks of hybrid modulation methods adopted by existing dual-leg-integrated inverters, such as double-variable control, and high THD of output voltage/current at high input voltage and heavy load conditions, unipolar frequency doubling sinusoidal pulse width modulation scheme is adopted in this inverter. As a result, the modulation ratio M becomes the only control variable to regulate the output voltage/current and the control is simplified. The THD of the proposed inverter output can remain low throughout the entire input voltage range and load power range. This paper presents the topology derivation procedure, operation principle, and steady-state characteristics of the proposed inverter. To validate the effectiveness of theory, experimental results of a 400 W hardware prototype, where the output voltage frequency is at 500 Hz, are reported. [ABSTRACT FROM PUBLISHER]

In the traditional three-resistor-based current sampling scheme, the sampled currents will become inaccurate when the duration of zero-voltage vectors of an inverter is too short, which leads to a limited modulation index (MI). To overcome this problem, an improved three-resistor sampling method is proposed by establishing a predictive current model of an inverter load, which is that of an induction motor on the synchronous rotating frame for the demonstration purpose in this paper. The principle of this method is detailed in the paper. Then a simulation model of a vector-controlled induction motor drive that utilizes the proposed current sampling scheme is built in the Simulink environment. Finally, the experiment on the new sampling scheme is performed in both steady-state and dynamic conditions. The results verify that the existing current sampling problems can be solved effectively and the motor can perform well with higher MI under the new scheme. As a result, the loading capacity of the system can be enhanced notably. [ABSTRACT FROM PUBLISHER]

This paper provides an experimental and theoretical discussion on dynamic braking for a medium-voltage induction motor fed by a modular multilevel double-star chopper-cell (DSCC) inverter. It is intended to apply the motor drive to large-capacity fans and compressors with a large moment of inertia. Each chopper cell consists of a bidirectional chopper and a braking chopper connecting a single small-rated braking resistor in series with a single IGBT. This configuration results in a “distributed” dynamic brake that provides a distinctive welcomed side effect of protecting all the bidirectional-chopper cells against sudden overvoltage. An experimental system rated at 400 V and 15 kW is designed, constructed, and tested to verify operating performance of the distributed dynamic brake. Experimental waveforms, along with simulated waveforms, confirm firmly that the distributed dynamic brake is feasible and effective in an induction motor fed by a medium-voltage high-power DSCC inverter for fans and compressors. Finally, this paper gives a design example of a distributed dynamic-braking resistor for the 11-kV, 12-MW induction motor driving a large-capacity fan equipped with a large moment of inertia. [ABSTRACT FROM AUTHOR]

This paper presents the tradeoff study of heat sink and output filter volume of a GaN HEMT based single-phase inverter. The selected topology is three-level active neutral point clamped (ANPC) inverter, and the main aim is to explore the benefits of the GaN HEMTs at 600 V blocking class on the system level efficiency, and power density under the wide range of operating conditions. The paper starts by introducing the inverter topology, selected pulse width modulation scheme and followed by the device features, static, and dynamic characterization and continues with presenting and discussing the results of extensive experimental and analytical characterization. After this, the impact of GaN HEMTs on inverter volume is discussed in terms of heat sink and output filter volume analysis under different switching frequency and heat sink temperature conditions. The calculation of heat sink volume and single stage LC output filter volume are presented with respect to experimental results of the single phase prototype. The findings from static, dynamic characterization, and single phase prototype results clearly show that GaN HEMT has excellent switching performance under wide load current and heat sink temperature conditions. The high performance of the inverter leads to reduction of the combined total volume, including output filter and heat sink volume. [ABSTRACT FROM AUTHOR]

This paper proposes an optimized mathematical model of the voltage-source inverter parallel-operation system (VSIPS) and proposes an improved droop control method based on this model, which can realize accurate power sharing in VSIPS. First, this paper analyzes VSIPS as a multi-input and multioutput system and proposes a precise definition of circulating current. The circulating-current model, the steady-state model, and the small-signal model are proposed subsequently based on the optimum design of wire impedance, which constitute the optimized mathematical model of VSIPS in s-domain. The circulating-current phasor model and the circulating-current power phasor model (CCPPM) are also proposed. Second, the mathematical model of traditional droop control is built and analyzed based on CCPPM, which elaborates the tradeoff of droop control between the steady-state voltage bias and the load-sharing accuracy, and proves that the $V- Q$ droop control cannot realize accurate reactive-power sharing. Third, an improved droop control method ( $\omega - P_{{\text{cir}}}$ and $V- Q_{{\text{cir}}}$ control) is proposed, which can realize the accurate active- and reactive-power sharing and eliminate the steady-state voltage bias simultaneously. Finally, simulation and experimental results are presented, which validate the proposed mathematical model of VSIPS, the analysis of droop control, and the performance of the proposed method. [ABSTRACT FROM AUTHOR]

This paper presents a novel six-pulse low-frequency (LF) fluctuating high-voltage dc-bus-based power system architecture for fuel cell vehicles (FCVs) application. A novel hybrid modulation scheme consisting of six-pulse modulation at LF scale and modified secondary modulation and 33% pulse width modulation at high-frequency (HF) scale is proposed. Three-phase ac waveforms for the propulsion system of FCVs are generated from LF fluctuating high-voltage dc bus. The proposed modulation technique significantly reduces the switching losses of the bidirectional dual-stage inverter: 1) soft-switching of both sides of the front-end current-fed full-bridge converter is realized; and 2) at any moment, only one leg of back-end three-phase inverter is switched at HF, while the other two legs are kept in on or off states. This tremendously reduces the bidirectional inverter's switching losses and improves the system efficiency. The LF fluctuating high-voltage dc bus allows the elimination of large electrolytic dc-link capacitor, which contributes to a more reliable and compact design. This paper presents the operation, analysis, and design of a bidirectional inverter implementing the proposed hybrid modulation technique. Simulation results obtained from power electronics simulation software PSIM and experimental results from the lab prototype clearly validate the effectiveness of the proposed modulation technique. [ABSTRACT FROM PUBLISHER]

This paper analyzes the benefits of the active damping applied to transformerless three-phase grid-connected photovoltaic (PV) inverters using modified LCL (MLCL) filter for leakage current reduction. In comparison with passive damping techniques, the active damping can reduce the MLCL filter resonance peaks, improving the dynamic performance of the control system without addition of power losses. Besides these classical advantages, this paper demonstrates that the active damping also contributes for PV leakage current reduction, preserving the high-frequency attenuation of the MLCL filter. Additionally, an active damping for the inverter common-mode circuit is also proposed, reducing the low-frequency leakage current caused by the common-mode signal used to extend the inverter modulation index. Experimental results are given to demonstrate the leakage current reduction and the grid current control for a 10 kW PV inverter. [ABSTRACT FROM PUBLISHER]

This paper proposes an active switching harmonic current reduction method within the dc-link capacitor of two-level, three-phase, back-to-back converters. This method is based on the derived analytical solution for switching harmonic currents in the dc-link. It is shown that by controlling the pulse width modulation carrier waveform's phase angles, the harmonics in the second carrier band of the rectifier and the inverter can be synchronized such that cancellation occurs in the dc-link capacitor. This synchronization is provided by harmonic phase feedback control. The feasibility of the proposed approach has been verified experimentally and results are presented in this paper. [ABSTRACT FROM PUBLISHER]

This paper proposes a current sensorless control strategy for the dual active bridge (DAB) converter with nonlinear disturbance observer (NDO)-based load current feedforward. The proposed method can regulate both the dc-bus voltage and the current of the DAB converter without current sensors. Several performance indexes are established for the parameter design and a detailed design method is presented in this paper. When a single-phase H-bridge inverter is connected, the double-frequency oscillation from the feedback path is suppressed by proper parameter design, while the transient response of dc-bus voltage can be further improved by the NDO-based load current feedforward with a notch filter in the feedforward path. The performance of the proposed control method and the effectiveness of the parameter design are verified in a prototype by experimental results. [ABSTRACT FROM PUBLISHER]

Multiple transmitters powering a single receiver simultaneously is a good alternative to upgrade the power capacity of the wireless power transfer (WPT) system by using multiple modular inverters manufactured in a larger quantities, since the demand for high power applications is on the rise. A multiple overlapped transmitters based WPT system is presented in this paper. In order to alleviate the effects of the cross couplings between the transmitters, additional capacitors are adopted in the transmitters and the configuration of additional capacitors is provided. Virtual active and reactive powers are defined to decompose the transmitter current into active and reactive components. A transmitter current control scheme based on the proposed current decomposition method consisting of one reactive current control loop and one active current control loop is also presented in this paper. Finally, a low-scale experimental setup using two overlapped transmitters WPT system is provided to verify the proposed approach. The experimental results indicate that the proposed method could improve the stability of output voltage control and achieve minimal current difference amongst transmitters. Besides, the overall system efficiency is improved to 90.34% with the proposed control method at 1.45 kW output power, which demonstrates that the proposed method is a potential solution for high power applications. [ABSTRACT FROM AUTHOR]

In this paper, direct torque control (DTC) of five-phase induction motor (FPIM) is implemented using three-level neutral point clamped (TL-NPC) inverter. One of the advantages of three-level inverter over two-level one for DTC operation is the low torque ripple. Also TL-NPC inverter through space vector modulation technique gives low $ dv/dt$ transition with better voltage waveform. By applying conventional lookup table for DTC, the TL-NPC inverter does not ensures lower $dv/dt$ transition. In this paper, a novel switching scheme for DTC of FPIM using TL-NPC inverter is proposed that ensures the low $ dv/dt$ transition and balancing of dc-link capacitor voltages of TL-NPC inverter. To form the lookup table for DTC operation, instead of using voltage vectors directly, virtual vectors (VVs) are utilized. Two switching states are used in one sample time to generate a VV in $\alpha \beta$ plane, which gives zero resultant voltage in $ xy$ plane. The switching strategy ensures low number of transitions to reduce the switching losses. The switching state redundancies are used in a novel way to balance the dc-link capacitor voltages without using any additional hardware. The proposed technique to balance the dc-link capacitor voltage gives lower switching frequency. The MATLAB/Simulink environment is used for the simulation and the results are validated through experiments. [ABSTRACT FROM AUTHOR]

This paper analyzes synchronization strategy for cascaded H-bridge multilevel inverter (CHBMLI) topologies with a carrier-based sinusoidal phase-shifted pulse width modulation (PSPWM) technique. In the PSPWM technique, a separate carrier is used for each H-bridge (HB). The carriers are generally phase shifted from each other by π /x rad (x = No. of HBs) for unipolar PWM. With the carrier frequency being an integer (odd/even) multiple of the fundamental frequency, it is observed that the positions of zero crossings of the carriers with respect to the zero crossings of voltage references play an important role for maintaining quarter-wave symmetry among multilevel inverter pole voltage waveforms. This paper analytically shows the conditions for half-wave symmetry and quarter-wave symmetry and experimentally verifies those conditions for the PSPWM technique with a five-level CHBMLI laboratory prototype. [ABSTRACT FROM PUBLISHER]

A novel control strategy for single-phase current-source inverters connected to an ac grid is proposed in this paper. The control strategy aims to inject maximum power to the grid under transient and steady-state conditions by the tracking of sinusoidal references. This paper presents the modeling and the design of the control strategy based on the exact linearization of the inverter model. Results are obtained by computational simulation and validated experimentally. By using error performance indexes in the analysis of the results, it is demonstrated that the proposed controllers achieve correct tracking of the sinusoidal reference while keeping a low switching frequency, which helps to minimize the commutation losses. [ABSTRACT FROM PUBLISHER]

The performance of modular multilevel converters (MMCs) in medium-voltage applications, where the number of required submodules is not high, can be improved utilizing low switching frequency modulations such as (2N+1) selective harmonic elimination-pulse width modulation (SHE-PWM), which provides tight control of lower order harmonics and low switching losses. This paper proposes a calculation method, which is based on a novel formulation, to solve the SHE-PWM problem. In particular, MMCs with (2N+1) phase output voltage levels are considered, obtaining a (2N+1) SHE-PWM waveform. This method utilizes a unique system of equations that is valid for any possible waveform. Therefore, it is able to calculate simultaneously, without predefined waveforms, both the switching patterns and the associated firing angles that solve the (2N+1) SHE-PWM problem. Consequently, the search process is simplified and optimized. Furthermore, this paper also proposes a circulating current control technique, which can be applied along with (2N+1) SHE-PWM without disturbing the phase output voltage. Simulation results and experimental tests obtained with a single-phase laboratory prototype prove the validity of the novel (2N+1) SHE-PWM implementation method and the proposed circulating current control technique. [ABSTRACT FROM PUBLISHER]

Switching harmonic attenuation has always been challenging for inverters used in high-power conversion applications, where ratio of switching to fundamental frequency is low. Addition of multiple LC-trap filters is no doubt a feasible cost-effective method, which has increasingly been used, but generally susceptible to filter parameter variations and harmonic resonances. This paper hence presents an alternative active trap filter (ATF), based on a series-LC-filtered inverter, for attenuating switching harmonics in a flexible, while yet not cost burdensome, approach. A direct impedance synthesis method has also been proposed for the ATF to better enforce its active switching harmonic bypassing ability. Compared with conventional schemes for controlling active power filters, the proposed method is more readily implemented, since it requires neither current reference generation nor high-bandwidth current control loop. Moreover, the use of a series LC filter at its ac side helps the ATF to reduce its inverter voltage and power ratings. Compensated frequency range of the ATF can hence be enlarged by using a comparably higher switching frequency and a proper step-by-step design procedure to be presented in this paper. Simulation and experimental results have confirmed the design procedures, and hence expected performance of the ATF. [ABSTRACT FROM PUBLISHER]

This paper presents the analysis and experiments of a variable inductor (VI) based LED driver for dc grid lighting applications. The proposed driver requires only a series inductor and a transformer as major components to drive the LED lamp from a half-bridge inverter. By introducing a VI as the series inductor, the LED current can be controlled independently from any other parameter, which makes it possible to drive and regulate several LED branches from the same half-bridge output. Other advantages of the proposed converter include inherent open-circuit and short-circuit protections, zero-voltage switching for the bridge transistor and zero-current switching for the output rectifier diodes, simple dynamics, possibility of analog and pulse width modulation dimming, constant switching frequency operation, and high efficiency. The converter is thoroughly analyzed and modeled for both steady-state and dynamic operation. As another novelty of this paper, the dynamic response of the VI has been studied and taken into account to obtain the complete transfer function of the VI-controlled system. In addition, some housekeeping issues that usually arise when dealing with VI, e.g., how to drive the VI bias winding, are solved in this work. Experimental results provided from a 50 W laboratory prototype demonstrate the correctness of the performed analysis and the good possibilities of the proposed converter. [ABSTRACT FROM PUBLISHER]

This paper presents an improved direct torque control (DTC) method for an asymmetrical six-phase induction motor using a two-level six-phase inverter. As is well known, a simple extension of three-phase DTC technique to an asymmetrical six-phase motor, using large vectors only, introduces significant current harmonics of the order 6 n±1 (n = 1, 3, 5,…), which are mapped into the nonflux/torque producing (xy) plane. These harmonics cause only losses in the motor winding as they do not take part in torque production. Hence, a number of different improved DTC techniques have been developed in the past for multiphase motor drives. The paper takes one such DTC method as the starting point and improves it further by using the concept of virtual voltage vectors. Developed vector selection algorithm, based on two virtual voltage vectors, requires the information on position of the flux in the auxiliary (xy) subspace and provides stator current quality commensurate with the currently available best DTC algorithm for six-phase drives. However, use of two virtual voltage vectors enables a substantial reduction of the torque ripple, which is achieved by means of a five-level torque comparator. Extensive experimentation is performed and it is shown that the reduction of the current harmonics is in essence almost the same as in another recently developed DTC scheme, based on the use of a single virtual voltage vector. However, the achieved torque ripple reduction, which is verified experimentally, makes the scheme superior when compared to the existing approaches. At the same time, developed scheme retains qualities of conventional DTC schemes, such as simple structure and fast response. Its additional beneficial feature is the easiness of implementation. [ABSTRACT FROM PUBLISHER]

The objective of this paper is to propose a novel photovoltaic (PV) micro-inverter with PV current decoupling (PVCD) strategy to achieve maximum power point tracking (MPPT) performance without using large electrolytic capacitors. Conventionally, the grid-connected PV micro-inverter needs a large PV-side electrolytic capacitor to suppress the double-line frequency voltage ripple, which is caused by the injected ac grid power, to achieve the desired MPPT performance. However, the short lifetime electrolytic capacitor will reduce the PV micro-inverter's reliability dramatically. Therefore, different active power decoupling circuits (APDCs) have been proposed in published papers to reduce the required input capacitance so that the long lifetime film capacitor can be used to replace the electrolytic capacitor. Unlike the conventional APDC with charging and discharging modes operation, a novel PVCD strategy, which is based on the concept of current decoupling instead of power decoupling, is proposed to simplify the control mechanism of the PV micro-inverter. Furthermore, to accomplish the proposed current decoupling concept, a novel circuit topology for the PV micro-inverter is also proposed. With the proposed PVCD strategy, the current decoupling tank (CDT) inside the proposed PV micro-inverter can buffer the current difference between the constant current from the PV panel and the rectified sinusoidal current of the ac grid current. Therefore, the input capacitance on the PV-side can be reduced dramatically and the long lifetime film capacitor can be used to replace the electrolytic capacitor. The reliability of the PV micro-inverter with good MPPT performance can be increased. In this paper, the operation principle and the component design of the proposed PV micro-inverter with PVCD strategy will be presented. Simulation results and experimental results of a prototype 240 W PV micro-inverter is shown to verify the performance of the PV micro-inverter with PVCD strategy. [ABSTRACT FROM AUTHOR]

This paper presents a bridgeless Cuk-derived single power conversion inverter with reduced number of power components, which has reactive-power capability. The secondary diode of the conventional unfolding-type Cuk inverter is integrated into one of the secondary-side switches in the bridgeless Cuk-derived configuration, which reduces the number of active-power components. A modulation technique is developed to provide a current path during reverse power flow; this technique enables operations under unity and nonunity power factors. A repetitive controller coupled with a linear feedback controller and a feed-forward controller are used to achieve accurate output current tracking under the harsh control environment. Driving the diode-integrated switch in synchronous rectification mode provides higher power conversion efficiency than that under diode-based secondary side rectification. Circuit operation and design guidelines of the bridgeless Cuk inverter are presented in detail. A 500-VA prototype inverter was fabricated to demonstrate the desirable performance of the bridgeless Cuk-derived inverter. [ABSTRACT FROM AUTHOR]

In this paper, a new structure of a proportional integral (PI) current controller implemented in a synchronous $d,q$ reference frame (SRF-PI), for grid-tied voltage inverters, is presented. The controller has deadbeat response for current reference tracking, reaching it in two samples. It also keeps the main feature of the SRF-PI controller: its ability to track without error, in the absence of other disturbances, a positive sequence current reference of fundamental frequency. Furthermore, the controller ensures the full decoupling between the currents of axes $d$ and $q$. The controller is compared, through simulation and experimental results, with one SRF-PI controller recently published in the literature. It is verified that the proposed controller introduces noticeable improvements in both the transient response and in the steady-state response to perturbations in the control loop. [ABSTRACT FROM AUTHOR]