Search

Starting with a brief review on the existing methods of impedance emulation, this paper addresses a general and systematic approach to programmable and reconfigurable emulation of power impedances. The proposed approach not only enables the impedance value to be programed, but also allows the characteristics (i.e., type) of the impedance to be reconfigured instantly during the operation. Based on the proposed control method, emulation of at least six types of emulated power impedances (EPI) can be easily attained. In particular, it is theoretically and practically demonstrated that the impedance characteristic can be emulated through a combination of different functions. The systematic derivation of these functions is explained. New techniques that compensate the circuit power losses are introduced. This general approach has been practically verified in several EPI. Both steady-state and dynamic performance of these EPI confirm the programmability and reconfigurability. It is envisaged that the proposed method can be applied to a range of functions, such as power filtering, energy storage, and even power conversion based on direct impedance control. [ABSTRACT FROM PUBLISHER]

This paper discusses reactive power compensators from the point of stored energy in the capacitor, and proposes a single-phase full-bridge configuration of semiconductor switches to be used with reduced equipped capacitance for reactive power compensation. By applying this concept to shunt-type static var compensator, a static synchronous compensator can be achieved with reduced-sized capacitor. Additionally, the switching loss can be reduced due to its distinctive capacitor voltage waveform, which swings at the double of the line frequency. Modulation technique and capacitor voltage control method based on the reduced capacitance and high-voltage ripple in the capacitor are proposed. The concept and control method were confirmed with small-scale experiments. [ABSTRACT FROM AUTHOR]

This paper presents a transformerless static synchronous compensator (STATCOM) system based on multilevel H-bridge converter with star configuration. This proposed control methods devote themselves not only to the current loop control but also to the dc capacitor voltage control. With regards to the current loop control, a nonlinear controller based on the passivity-based control (PBC) theory is used in this cascaded structure STATCOM for the first time. As to the dc capacitor voltage control, overall voltage control is realized by adopting a proportional resonant controller. Clustered balancing control is obtained by using an active disturbances rejection controller. Individual balancing control is achieved by shifting the modulation wave vertically which can be easily implemented in a field-programmable gate array. Two actual H-bridge cascaded STATCOMs rated at 10 kV 2 MVA are constructed and a series of verification tests are executed. The experimental results prove that H-bridge cascaded STATCOM with the proposed control methods has excellent dynamic performance and strong robustness. The dc capacitor voltage can be maintained at the given value effectively. [ABSTRACT FROM AUTHOR]