Search

This article studies a new hybrid converter that utilizes thyristors and full-bridge (FB) arms for achieving high-power capability with reduced semiconductor power rating compared to the FB modular multilevel converter. The study covers the theoretical analysis of the energy balancing, the dimensioning principles, the maximum power capability, and the limitations imposed by the discontinuous operation of the converter. Based on the analysis of these aspects, the theoretical analysis is concluded by identifying the operational constraints that need to be fulfilled for maximizing the power capability of the converter. It is concluded that the maximum power capability can be achieved for a certain range of modulation indices and is limited by both the commutation time of the thyristors and the power angle. Moreover, the P–Q capability of the hybrid converter is presented and discussed. Finally, simulation and experimental results that confirm the theoretical analysis and the feasibility of the studied converter are presented and discussed. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to investigate the impact of switching harmonics on the instantaneous power distribution in the cells of a cascaded H-bridge-based STATCOM when using phase-shifted pulse width modulation. The case of high- and low-switching frequency for the converter cells is investigated and the interaction between voltage and current harmonics is analyzed. It is shown that in both cases, this interaction results in an uneven power distribution among the cells in the same phase leg, leading to drifting of the dc-capacitor voltages and thereby the need for proper stabilization control loops. It is also shown that the selected frequency modulation ratio affects the active power distribution among the cells. In particular, the selection of a noninteger frequency modulation ratio helps in providing a more uniform power distribution among cells of the same phase leg, thus contributing to the capacitors balancing. A methodology for optimal selection of the frequency modulation ratio is given. Theoretical conclusions are validated through simulation and experimental results. [ABSTRACT FROM AUTHOR]

This paper discusses reactive power compensators from the point of stored energy in the capacitor, and proposes a single-phase full-bridge configuration of semiconductor switches to be used with reduced equipped capacitance for reactive power compensation. By applying this concept to shunt-type static var compensator, a static synchronous compensator can be achieved with reduced-sized capacitor. Additionally, the switching loss can be reduced due to its distinctive capacitor voltage waveform, which swings at the double of the line frequency. Modulation technique and capacitor voltage control method based on the reduced capacitance and high-voltage ripple in the capacitor are proposed. The concept and control method were confirmed with small-scale experiments. [ABSTRACT FROM AUTHOR]

This paper presents a new multilevel selective harmonic elimination pulse-width modulation (MSHE-PWM) technique for transformerless static synchronous compensator (STATCOM) system employing cascaded H-bridge inverter (CHI) configuration. The proposed MSHE-PWM method optimizes both the dc-voltage levels and the switching angles, enabling more harmonics to be eliminated without affecting the structure of the inverter circuit. The method provides constant switching angles and linear pattern of dc-voltage levels over the modulation index range. This in turns eliminates the tedious steps required for manipulating the offline calculated switching angles and therefore, easing the implementation of the MSHE-PWM for dynamic systems. Although the method relies on the availability of the variable dc-voltage levels which can be obtained by various topologies, however, the rapid growth and development in the field of power semiconductor devices led to produce high-efficiency dc-dc converters with a relatively high-voltage capacity and for simplicity, a buck dc-dc converter is considered in this paper. Current and voltage closed loop controllers are implemented for both the STATCOM and the buck converter to meet the reactive power demand at different loading conditions. The technique is further compared with an equivalent conventional carrier-based pulse-width modulation to illustrate its enhanced characteristics. The effectiveness and the theoretical analysis of the proposed approach are verified through both simulation and experimental studies. [ABSTRACT FROM AUTHOR]