Search

The fault-tolerant control method of dual three-phase permanent-magnet synchronous motor (PMSM) drives has gained more and more attention in some applications, such as aircraft system and offshore wind energy system. In this letter, the reason for the torque ripple caused by the standard control method has been investigated in view of the frequency domain after the occurrence of a single open-phase fault. Based on the theoretical analysis, a universal control scheme has been proposed for the dual three-phase PMSM drives with two isolated neutral points, which can be implemented under either healthy condition or fault condition. The key is to modify with a closed-loop controller on harmonic subspace with the notch filter. The proposed method not only realizes the seamless transition between two operation conditions without fault diagnosis but also avoids the reconfiguration of the control structure. Moreover, the system optimization of the minimum copper loss under postfault condition has been integrated into the proposed method. The experimental results are presented to illustrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Pulsewidth-modulated (PWM) current-source converters (CSCs) have the features of simple configuration, reliable short-circuit protection, and sinusoidal ac output voltages. The conventional space-vector modulation (SVM) scheme usually generates high-magnitude low-order harmonics in CSCs with low switching frequency. In this article, two modified SVM schemes, namely MSVM1 and MSVM2, are proposed to improve the harmonic performance for PWM CSCs in the high-power applications with low switching frequencies. The MSVM1 scheme focuses on eliminating the average dwell-time error of current vectors within each sampling period, while the MSVM2 scheme is targeted to achieve the accurate dwell time of current vectors as that of the natural sampling-based SVM scheme. The theoretical analysis and the calculation equations of dwell time are derived for both MSVM1 and MSVM2. The experiments are given to verify the effectiveness of the two modified SVM schemes in improving the harmonic performance of high-power CSCs with low switching frequencies. [ABSTRACT FROM AUTHOR]

Aiming at tolerating common electric faults of multiphase motor drives comprehensively and minimizing the adverse impacts from the remedial scheme itself, a diagnosis-free self-healing scheme is put forward for the open-circuit faults of dual three-phase permanent-magnet synchronous motor (PMSM) drives. First, the self-healing mechanisms of dual three-phase PMSM drives are analyzed in detail. On the basis of theoretical analysis, the repressed self-healing capability of the dual three-phase PMSM drives is fully released by optimizing the current references on harmonic subspace. Since the diagnosis process is not required in the proposed self-healing scheme, the misdiagnosis problem and the prolonged damage caused by the additional time cost of diagnosis can be fundamentally avoided. The proposed self-healing scheme can be generally applied to open-switch faults, single open-phase faults, and multiple open-phase faults in the multiphase motor drives. No change is required for the machine model, modulation strategy, or control framework under different open-circuit faults. Thus, the complex transition strategies among different fault-tolerant control methods for different faults can be avoided, and the adverse impacts from the remedial scheme itself can be minimized. Experimental verification is presented to prove the validity of the proposed self-healing scheme. [ABSTRACT FROM AUTHOR]

In this paper, diagnosis and tolerant control schemes have been studied for common electrical faults in T-type three-level inverter fed dual-three phase permanent magnet synchronous motor (PMSM) drives for safety-critical applications. Based on vector space decomposition and double three-phase space vector modulation, diagnostic and tolerant control methods have been developed comprehensively for open-phase faults, open-switch faults, and short-switch faults in T-type three-level inverter fed dual-three-phase PMSM drives, in such way that misdiagnosis of different faults sharing similar faulty features can be avoided. In particular, a two-step diagnostic scheme is proposed in order to simplify the diagnostic process. The first step is to identify the faulty phase and fault category by analyzing current trajectories on harmonic subspace, and the second step is to determine the specific fault type in a small fault-searching area obtained from the first step. In the aspect of fault-tolerant control, a novel current compensation method is proposed for open-phase fault without changing the machine model, space vector diagram, and control framework. Open-switch faults and short-switch faults are tolerated by making full use of the remaining vectors after faults. The validity of the proposed fault diagnosis and tolerance schemes has been verified by experiments. [ABSTRACT FROM AUTHOR]

The direct torque control (DTC) is widely used in motion control of electric drives, especially for the switching table based direct torque control (ST-DTC) and the space vector modulation (SVM) based DTC (SVM-DTC). The classical ST-DTC schemes can achieve fast dynamic response but may suffer from distinct torque and flux ripples in steady-state operation. On the other hand, the classical SVM-DTC schemes have lower ripples in torque and flux, but the methods slow down dynamic response of DTC. Different from them, a novel hybrid DTC scheme is proposed for dual three-phase permanent-magnet synchronous motor (PMSM) drives in this paper, which can achieve fast dynamic response of classical ST-DTC scheme and good steady-state performance of classical SVM-DTC scheme simultaneously. The key of the proposed scheme is to implement different torque control methods under dynamic operation mode and steady-state operation mode, respectively. A switching method has been designed to guarantee smooth transition between the two operation modes. Besides, the decoupling control of torque and stator flux is maintained with the proposed control scheme, and the stator flux is controlled stably all along. By experiments on a laboratory prototype, it has been verified that the proposed scheme can achieve both good steady-state and transient performance compared to other control methods for dual three-phase PMSM drives. [ABSTRACT FROM AUTHOR]

In this paper, a novel space vector modulation (SVM) strategy is proposed and designed for dual three-phase three-level motor drives based on vector space decomposition (VSD), which could be applied for high-power and high-reliability applications. The key of the proposed method is to design two decoupled groups of voltage vector candidates for synthesis on α − β subspace and x − y subspace, respectively. The two decoupled groups of voltage vectors will synthesize respective voltage references on α − β subspace and x − y subspace, while having no impact on each other. The redundant small voltage vectors and zero-sequence voltage vectors are utilized to mitigate voltage oscillation in midpoint of dc link and suppress zero-sequence current component for dual three-phase windings with a common neutral. For comparison, another VSD-SVM strategy is designed based on traditional solution, which cannot offer closed-loop control on x − y subspace. Both simulation and experiments have been given to verify that the proposed decoupled VSD-SVM can suppress harmonic components on x − y subspace besides tracking torque components on α − β subspace. Furthermore, the harmonic performance of the proposed decoupled VSD-SVM has been compared with the traditional VSD-SVM strategy and the carrier disposition based pulsewidth modulation. [ABSTRACT FROM AUTHOR]

This paper studies and proposes the vector space decomposition-based direct torque control (DTC) scheme for the T-type neutral-point-clamping (T-NPC) three-level inverters-fed double-stator-winding permanent magnet synchronous machine (PMSM) drive, which provides an effective solution for high-power high-reliability applications. The key is to propose a simple but effective space vector modulation (SVM) for DTC of T-NPC double-stator-winding drives-based two-step voltage vector synthesis, in such a way that good dynamic response and harmonic performance are obtained. The closed-loop controllers on harmonic subspace are incorporated to suppress the possible harmonics induced from back electromotive force and unbalanced parameters in phase windings of electrical machine. Furthermore, a hybrid current control is proposed for fault-tolerant operation of the T-NPC double-stator-winding PMSM drives under one-phase open-circuit conditions. In the hybrid current controller, the healthy winding still uses the SVM-DTC control while the faulty winding uses the closed-loop current controller to track the optimized current references. Both simulation and experimental results are presented to verify the performance of the proposed switching strategies and control schemes. [ABSTRACT FROM AUTHOR]

In this paper, three control schemes with variable switching frequencies are proposed and analyzed for the paralleled voltage source inverters (VSIs) fed permanent magnet synchronous motor (PMSM) drive. The proposed schemes could be applied in the low-speed operation region of high-power drive system, where the frequency modulation index is high. First, the field-oriented control (FOC) with phase-shifted chaotic space vector modulation (SVM) under synchronous frame and the FOC with phase-shifted chaotic sinusoidal pulse width modulation under stationary frame is proposed for the paralleled VSIs fed PMSM drive. The proposed phase-shifted chaotic PWM schemes not only eliminate specific switching harmonics completely but also suppress all remaining switching harmonic peaks in the spectrum. The avoidance of inherent circulating current is also considered in designing these two schemes. Second, the direct torque control (DTC) for the paralleled VSIs fed PMSM drive is proposed with circulating current suppression. Besides inheriting the advantages of DTC, the output currents of paralleled VSIs are kept balanced. The working principles of these three methods are presented in detail. Experimental results on a laboratory prototype are given to verify the validity of the three proposed control schemes for the paralleled VSIs fed PMSM with variable switching frequencies. [ABSTRACT FROM PUBLISHER]

In this paper, a hybrid pulsewidth modulation (PWM) scheme is proposed to suppress the LC resonance for the high-power current-source inverter (CSI) fed drives with low switching frequency. In CSI drive systems, the selective harmonic elimination (SHE) is selected due to the better performance of harmonics, but the LC resonance cannot be effectively damped due to the lack of control flexibility of SHE. In this paper, SHE is only used for the steady-state operation. The modulation scheme is then switched to space vector modulation with dynamic capacitor voltage control when the transient event occurs. The smoothed transitions between different modulation schemes are proposed. The proposed hybrid method effectively solves the resonant issues in CSI drives, while maintaining the power quality. Both simulation and experiments verify the performance of the proposed hybrid PWM scheme. [ABSTRACT FROM AUTHOR]