Search

The partial power processing (PPP) concept has been extensively employed in many two-port converters to achieve high efficiency and high-power density by modifying one of the original converter ports to be connected in series between input and output. This is attractive but is confined to two-port applications, and how to extend it to multiport applications is not clear. Hence, this article aims to explore a generalized PPP multiport scheme by arranging the connection of the module rather than the converter. For a PPP single-input(output)-N-outputs(inputs) converter, one terminal of all N+1 modules is connected together to construct a radial structure, and another terminal is series/parallel connected with the input/output port. Each module only needs to process partial power caused by the voltage or current difference between input and output. Therefore, the required power rating of components is effectively reduced, contributing to low cost as well as low power loss. In this article, a PPP single-input dual-output converter with active bridge modules is also taken as an example to be introduced in detail, designed and experimented upon, which validates that high efficiency and high-power density can be achieved. [ABSTRACT FROM AUTHOR]

This paper deals with an optimized three-level modulated phase shift control using particle swarm optimization (PSO) strategy based on the unified phasor analysis with an aim to improve the efficiency of the bidirectional dual active bridge (DAB) converter for the whole operation range. A unified mathematical model based on Fourier transform is built for the DAB converter. All possible operation states under the three-level modulated phase shift control are covered. Accurate complex mathematical expressions for the inductor current, the transmission power, and the reactive power are obtained. Both modulus and angle variables are illustrated with respect to the inner and outer phase shift angle with the phasor diagram. The proposed method is able to achieve the minimum reactive power under three-level modulated phase shift control by obtaining the optimal phase-shift angles directly. The cumbersome process of the optimal operation mode selection for different voltage conversion ratio and load conditions in conventional methods is overcome successfully, thus greatly simplifying the theoretical calculation and implementation difficulty. Simulation and experimental results in terms of the reactive power, soft-switching range, and efficiency are provided to verify the practical feasibility of the proposed method for the bidirectional DAB converters. [ABSTRACT FROM AUTHOR]