Search

Capacitive power transfer is becoming an attractive alternate for wireless chargers. A coupler with large self- and mutual capacitance is desirable from the power and efficiency perspective. However, state-of-the-art couplers suffer from the tradeoff design issue between these two types of capacitance. In order to improve the required capacitance, an interleaved capacitive coupler is proposed and evaluated based on the Maxwell-based simulation. Using more plates, it can effectively use the coupling space to maintain the required self- and mutual capacitance, while minimize the cross coupling effects. Meanwhile, the new coupler is also helpful to reduce the radioactive electric field, and the high-radiation region is reduced dramatically. In the experiment, three types of couplers are built with the same coupling space, compensations, and output power. The proposed interleaved structure can achieve the highest efficiency and minimum radiation. [ABSTRACT FROM AUTHOR]

Capacitive power transfer is a promising mid-range wireless charging technique. The existing induced current source model suffers from the coupling variation issue, which causes troubles in resonance design and compensation development. This article explores an induced voltage source model for the capacitive coupler. Using this model, the six coupling-dependent capacitors between each pair of plates are equivalently represented by the self-capacitors and induced voltage sources. The self-capacitance is verified to be coupling independent. Based on this model, the power transfer capability, the efficiency, and the influence of adding external shunt capacitors are easily analyzed. This model is very helpful in investigating the existing topology and developing new compensations, such as the CLL-L compensation. Finally, a capacitive coupler is built to verify the model, based on which a CLL-L compensation is implemented for constant output voltage application. The achieved system peak efficiency is 88%. [ABSTRACT FROM AUTHOR]

This paper proposes a new battery cell voltage equalization approach using multiple-receiver wireless power transfer (WPT) working at megahertz (MHz). Compared with existing multiwinding transformer, the MHz multiple-receiver WPT system is advantageous in terms of saved weight and space, ease of implementation, and improved safety. In this paper, the unique operating principle of the WPT-based equalization is first explained, through which equalization currents are naturally determined by the battery cell voltage distribution. The currents are also analytically derived. This facilitates the discussion on power amplifier (PA) design. Performance analysis is then provided to investigate the influences of system parameters on the efficiency and equalization ability of the proposed WPT-based equalization system, and thus guide following design and implementation. Considering the uncertainty in PA load due to the random cell voltage distribution, a current-model Class $E$ PA is designed that enables approximately constant PA output current. Experimental results show that the proposed multiple-receiver WPT-based battery cell equalization system can achieve high overall system efficiency (above 71%) when equalizing six lithium-ion battery cells under loosely coupling ( $k$ = 0.065). A good match between the experimental and calculation results also validates the correctness of the theoretical discussion. [ABSTRACT FROM PUBLISHER]

Wireless power transfer (WPT) working at megahertz (MHz) is now being widely considered a promising candidate for the midrange transfer of a medium amount of power. Efforts have been made to build high-efficiency MHz WPT systems via both component- and system-level approaches. However, so far there have been few discussions on high-frequency rectifier for MHz WPT applications. The soft-switching-based rectifiers, such as the Class E rectifiers, are one of the promising candidates for MHz rectification. This paper investigates the application of a Class E full-wave current-driven rectifier, for the first time, in WPT systems. A procedure is also developed to optimize the design of the rectifier and the MHz WPT system. For comparison purposes, the performances of both the Class E rectifier and the conventional full-bridge rectifier are investigated in terms of total harmonic distortion (THD), efficiency, power factor, voltage/current stresses, and voltage/current transfer functions, when being applied in an example 6.78-MHz WPT system. The simulation and experimental results show that the input voltage THD of the Class E full-wave rectifier is reduced to one-fourth of the THD of the full-bridge rectifier. In the optimally designed MHz WPT system, efficiencies of both the rectification (over 91%) and the overall system (around 80%) are obviously improved compared to the system using the conventional full-bridge rectifier. [ABSTRACT FROM PUBLISHER]

Magnetic resonance coupling working at megahertz (MHz) is widely considered as a promising technology for the mid-range transfer of a medium amount of power. It is known that the soft-switching-based Class E rectifiers are suitable for high-frequency rectification, and thus potentially improve the overall efficiency of MHz wireless power transfer (WPT) systems. This paper reports new results on optimized parameter design of a MHz WPT system based on the analytical derivation of a Class E current-driven rectifier. The input impedance of the Class E rectifier is accurately derived, for the first time, considering the on-resistance of the diode and the equivalent series resistance of the filter inductor. This derived input impedance is then used to develop and guide design procedures that determine the optimal parameters of the rectifier, coupling coils, and a Class E PA in an example 6.78-MHz WPT system. Furthermore, the efficiencies of these three components and the overall WPT system are also analytically derived for design and evaluation purposes. In the final experiments, the analytical results are found to well match the experimental results. With loosely coupled coils (mutual inductance coefficient $k$ =0.1327), the experimental 6.78-MHz WPT system can achieve 84% efficiency at a power level of 20 Watts. [ABSTRACT FROM AUTHOR]