Search

A new converter topology for a three-phase multi- pulse rectifier circuit is described. This converter draws almost sinusoidal currents from the ac system with very low harmonic content and typically less than 3% total harmonic distortion. The topology uses only passive components and has a lower component count than other rectifier circuits with similar performance. Two six-pulse rectifier bridges are connected in series, fed by a series connection of transformers, to form a 12-pulse system. An additional low power harmonic injection circuit enhances the performance of the circuit to obtain low harmonic current pollution levels that are comparable with those achieved from a 24-pulse rectifier. The circuit operation is explained and experimental results are presented. [ABSTRACT FROM AUTHOR]

Fundamental frequency techniques are used to analyze the series-parallel resonant converter under heavy load conditions, both with a continuous, but distorted parallel capacitor voltage waveform, and with a discontinuous capacitor voltage waveform. The analysis is validated with results from an experimental prototype. The application of the technique to the parallel-loaded L-C resonant converter is also considered. [ABSTRACT FROM AUTHOR]

Presents a study that proposed a single-stage, three-phase alternating current-to-direct current converter topology for high-frequency power supply applications. Topology of the three-phase current injection; Principle of operation; System design and simulation; Experimental verification.