Search

Soft magnetic powder cores with their high saturation flux density and low core loss are excellent alternatives for filter inductors in inverter-based applications. However, their nonlinear current-dependent inductance characteristics pose a challenge for control of grid-connected inverter with LCL filter. In this paper, the variable inductance conundrum is discussed and a modified direct digital control method based on a variable-structure inductance estimation model that takes into consideration wide nonlinear variation in both inverter- and grid-side inductances is proposed. The proposed method is shown to have better grid-voltage harmonic rejection and improved stability margins. However, investigation of stability which is conventionally based on nominal values of filter inductors cannot predict instabilities over the entire range of inductance variation. Hence, a parametric approach to conventional stability methods with a parameter space defined by variation in actual and estimated inductance is explored in this paper. The effect of line impedance on stability is also investigated with impedance-based stability criterion by considering line inductance as an additional dimension in the parameter space. A pattern in stability margins is observed due to inductance variation, with inductance at its minimum being most vulnerable to instability. Experimental results measured from a 5 kW single-phase grid-connected inverter with various LCL filters have verified the feasibility of the proposed control method. The experimental results also match the analytical results with reasonable accuracy. [ABSTRACT FROM AUTHOR]

This paper presents a three-phase back-to-back transformerless inverter for online uninterruptible power supply applications. The inverter consists of a three-phase three-wire input rectifier stage and a three-phase four-wire output inverter stage with their ground wires tied together. Both of the two stages are with sinusoidal pulse width modulation based division-summation (D-∑) digital control. The input stage controls the power flow between utility grid and dc link, regulates the dc-link voltage, and fulfills power factor correction. While the output stage tracks three-phase ac reference voltages. The proposed control laws derived based on the D-∑ digital approach take into account the effects of dc-link voltage fluctuation, grid-voltage distortion, and inductance variation due to different current levels. Thus, distortion of input current and output voltage, and filter inductor core size can be reduced significantly. Moreover, circulating current through their common ground can be suppressed effectively. Simulated and experimental results from a three-phase back-to-back transformerless inverter have confirmed the analysis and discussion of the proposed control approach. [ABSTRACT FROM PUBLISHER]

This paper presents two-phase modulated digital control for a three-phase bidirectional inverter with wide inductance variation in dc distribution systems. The bidirectional inverter can fulfill both grid connection and rectification with power factor correction. With the proposed control, the inverter can track its sinusoidal reference currents, and it is allowed to have wide inductance variation, reducing core size significantly. The control laws based on space-vector pulsewidth modulation are first derived with either an accurate approach or an approximated one, and the gate signals were then derived based on two-phase modulation for lower switching loss and switching noise spectra. Determination of control parameters and stability analysis are also presented. In the design and implementation, the inductances corresponding to various inductor currents were measured and tabulated into a single-chip microcontroller for tuning loop gain cycle by cycle, ensuring system stability. Measured results from a 10 kVA 3φ bidirectional inverter have been presented to confirm the feasibility of the discussed control approaches. [ABSTRACT FROM AUTHOR]

This paper presents design and implementation of a 5-kW single-phase bidirectional inverter with wide inductance variation. For dc-microgrid applications, the bidirectional inverter has to fulfill grid connection and rectification with power factor correction to regulate the dc bus to a certain range of voltages. In the inverter operation, inductor current can vary from 0 to 32 A in one line cycle. This will result in wide inductance variation, around seven times for an inductor constructed with a molybdenum permalloy powder core, and thus, high current ripple and fluctuation. In this paper, we take into account this variation while designing controller and selecting key components to ensure inverter normal operation. Additionally, to adopt a cost-effective microcontroller for the inverter, the sensitivities of the control to various parameters are investigated and presented in this paper. Experimental results measured from a 5-kW single-phase prototype have verified the feasibility of the designed inverter. [ABSTRACT FROM PUBLISHER]