Search

In this study, a minimizing inverter capacity design is proposed, and the characteristics and performance of static VAR compensator (SVC) coupling hybrid active power filters (SVC-HAPFs) are analyzed. The cost of the SVC part is much lower than that of the active inverter part, and thus, the reduction of inverter part capacity can lead to a decrease in the total cost of SVC-HAPF. To demonstrate the advantages of the proposed minimizing inverter capacity design of SVC-HAPF, comparisons are given between the conventional and the proposed SVC-HAPF designs. Comparisons are also provided among active power filters (APFs), HAPFs, and the proposed SVC-HAPF in terms of dc-link voltage, compensation range, and performance. Finally, simulation and laboratory-scale experimental results are given to validate the minimizing inverter capacity design, and to verify the characteristics and compensation performances of APF, HAPF, and the proposed SVC-HAPF. [ABSTRACT FROM AUTHOR]

When the load generated harmonic, unbalanced, and reactive power is beyond the limited capacity of a thyristor-controlled LC-coupling hybrid active power filter (TCLC-HAPF), the TCLC-HAPF with the conventional control methods cannot provide satisfactory compensation performance. In this paper, a selective compensation control method of harmonic distortion, unbalanced and reactive power of the TCLC-HAPF is proposed, which can function even at different voltage conditions (e.g., voltage dip, voltage fault, etc.). First, the proposed control method decomposes the load power into fundamental positive-sequence reactive power, fundamental negative-sequence power (unbalanced power), and harmonic power. Then, the decomposed reactive, unbalanced, and harmonic power can be selectively or fully compensated based on the capacity of the TCLC-HAPF. Finally, simulation and experimental results are provided to verify the effectiveness of the proposed selective compensation control method for the TCLC-HAPF. [ABSTRACT FROM PUBLISHER]

In this article, a vector proportional–integral (VPI) current controller for the LC-coupling hybrid active power (LC-HAPF) with ideally zero steady-state error, optimal transient response, and good robustness is proposed. First, the transfer function of the proposed VPI current controller is introduced, and its parameter design for obtaining optimal transient response is discussed. Second, a detailed robustness analysis of the VPI current controller, including the system parameter variation, distorted grid voltage, and grid frequency variation conditions, is proposed. Third, the digital implementation method of the VPI controller and an overall control block diagram for the LC-HAPF with the proposed VPI current controller are presented. Moreover, a comparative study and analysis between the VPI current controller and the other representative current controllers under the minimum dc-link voltage is discussed in which the VPI current controller obtains the best performances under the minimum dc-link voltage operation. The simulation and experimental results are provided to verify the advantages and effectiveness of the proposed VPI current controller for a three-phase four-wire LC-HAPF in comparison with the other representative current controllers under different dc-link voltage conditions. Finally, the robustness under different grid conditions and unbalanced compensation capability of the proposed VPI-controlled LC-HAPF are also verified by the experimental results. [ABSTRACT FROM AUTHOR]