Search

Nowadays, neutral point voltage (NPV) balancing control and leakage current (LC) reduction methods are considered to improve the reliability of transformerless three-level T-type (3LT2) inverter. Medium vector pulse width modulation (MVPWM) method can control the inverter operation to eliminate the LC; however, is powerless to balance the NPV. Alternatively, discontinuous PWM (DPWM) methods can be implemented to balance the NPV. In this article, a hybrid method for transformerless 3LT2 inverter is proposed to simultaneously minimize the LC and accomplish balancing control in case of NPV unbalancing. The proposed method applies MVPWM switching patterns to eliminate LC while the NPV is balanced. If the NPV becomes unbalanced, it applies specific switching patterns of the DPWM methods as alternative patterns to balance the NPV with minimal LC. Accordingly, the proposed method not only maintains the LC elimination advantage of the MVPWM method but also realizes the NPV balancing capability without any topology modification or adding electrical components. Noteworthy, even the NPV balancing is accomplished with minimal flow of the LC. The proposed method is carrier-based PWM, which shortens execution time and simplifies practical implementation. Experimental tests have been accomplished and results demonstrate the effectiveness of the proposed method on adding the NPV balancing capability with minimal LC to the MVPWM method. [ABSTRACT FROM AUTHOR]

This paper investigates the open-circuit faults of switching devices in the three-level T-Type inverter and proposes a new tolerant control method. The three-phase current and variation of the neutral-point voltage are detected to determine the fault switch. A carrier-based pulse width modulation is developed to tolerate switch fault by transiting from three-level to two-level switching. This makes the modulation scheme easier to be implemented compared to space vector modulation. For the neutral-point fault, the fault phase is operated by two-level modulation to produce the same rating voltage. On the other hand, the inverter is able to produce balanced voltage with reduced rating by keeping the phase of half-bridge fault to the neutral-point voltage. The neutral-point voltage is also able to be balanced by using two-level modulation since it does not contribute the neutral-point current. The performance and effectiveness of the proposed tolerant control are verified by a laboratory build. [ABSTRACT FROM AUTHOR]