Search

The fault-tolerant control method of dual three-phase permanent-magnet synchronous motor (PMSM) drives has gained more and more attention in some applications, such as aircraft system and offshore wind energy system. In this letter, the reason for the torque ripple caused by the standard control method has been investigated in view of the frequency domain after the occurrence of a single open-phase fault. Based on the theoretical analysis, a universal control scheme has been proposed for the dual three-phase PMSM drives with two isolated neutral points, which can be implemented under either healthy condition or fault condition. The key is to modify with a closed-loop controller on harmonic subspace with the notch filter. The proposed method not only realizes the seamless transition between two operation conditions without fault diagnosis but also avoids the reconfiguration of the control structure. Moreover, the system optimization of the minimum copper loss under postfault condition has been integrated into the proposed method. The experimental results are presented to illustrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

In this article, the control strategy is studied for the neutral-point-clamped three-level inverter-fed dual three-phase permanent-magnet synchronous motor (PMSM) drive with low switching frequencies. An interleaved finite-control-set model predictive control (MPC) scheme is proposed, where a two-layer MPC is designed to solve the multiobjective optimization problem. The two sets of windings in PMSM are sampled and controlled in an interleaved way so that the control delay and the prediction horizon of the drive system are reduced by half. Moreover, the proposed interleaved control scheme increases the equivalent sampling and control frequency from the perspective of the whole drive system, and thus provides better steady-state performance and dynamic performance. With the switching states of one inverter remaining unchanged, the cross traversal of vector candidate sets between two sets of windings is avoided, and the computational burden can be reduced effectively. Experimental results are given to verify the validity and effectiveness of the proposed interleaved control scheme. [ABSTRACT FROM AUTHOR]

The rotor flux linkage of permanent-magnet synchronous motor (PMSM) is of great importance for monitoring and high-performance control. However, most of the existing online estimation methods need prior knowledge of other PMSM parameters such as stator resistance and dq axis inductance, which are difficult to realize in the rank-deficient models of electrical machines. This article proposes a simple online estimation method of rotor flux linkage for the dual three-phase surface-mounted PMSM (SPMSM) drives with the assistance of injected position offset. The independent estimation model has been developed for the rotor flux linkage by appropriate setting of positon offset between two sets of three-phase windings of dual three-phase SPMSM drives. The proposed method not only has little influence on the output torque and high signal-to-noise ratio for observation, but also offers the superior performance in estimation accuracy irrespective of the influence of VSI nonlinearity. In addition, the proposed position-offset-based method is suitable for the full-speed region including the field-weakening operation. Finally, comprehensive experimental results are presented to verify validity of the proposed method under different working conditions. [ABSTRACT FROM AUTHOR]

The silicon carbide (SiC) devices have attracted more and more attention due to the capability of withstanding higher blocking voltage, higher switching frequency, and higher temperature. However, challenges for SiC devices applied in voltage-source-inverter fed motor drives such as electromagnetic interference (EMI) issues and limited over-current capability still limit the further application of SiC devices. In this article, a novel SiC devices based zero-voltage-switching (ZVS) current-source-inverter (CSI) is proposed for permanent-magnet synchronous motor (PMSM) drive. The key is to propose an auxiliary resonant circuit, which achieves ZVS conditions for all switches in power circuits and reduces the dv/dt of high speed SiC devices. The resonant capacitor in the auxiliary circuit can clamp overvoltage caused by possible open-circuit faults. To further reduce the EMI, the random switching frequency pulsewidth modulation is designed for the proposed CSI motor drive. The system configuration, working principle, circuit design, and control schemes are described in detail. Both simulations and experiments are presented to verify the effectiveness of the proposed ZVS-CSI fed PMSM drive system. [ABSTRACT FROM AUTHOR]

Aiming at tolerating common electric faults of multiphase motor drives comprehensively and minimizing the adverse impacts from the remedial scheme itself, a diagnosis-free self-healing scheme is put forward for the open-circuit faults of dual three-phase permanent-magnet synchronous motor (PMSM) drives. First, the self-healing mechanisms of dual three-phase PMSM drives are analyzed in detail. On the basis of theoretical analysis, the repressed self-healing capability of the dual three-phase PMSM drives is fully released by optimizing the current references on harmonic subspace. Since the diagnosis process is not required in the proposed self-healing scheme, the misdiagnosis problem and the prolonged damage caused by the additional time cost of diagnosis can be fundamentally avoided. The proposed self-healing scheme can be generally applied to open-switch faults, single open-phase faults, and multiple open-phase faults in the multiphase motor drives. No change is required for the machine model, modulation strategy, or control framework under different open-circuit faults. Thus, the complex transition strategies among different fault-tolerant control methods for different faults can be avoided, and the adverse impacts from the remedial scheme itself can be minimized. Experimental verification is presented to prove the validity of the proposed self-healing scheme. [ABSTRACT FROM AUTHOR]

In this article, the switching strategy and the remedial control scheme are studied for the cascaded current-source converters (CSCs) fed dual three-phase permanent-magnet synchronous motor (PMSM) variable-speed drives. An optimized space vector modulation (SVM) strategy is proposed to reduce the DC-link current ripple for the proposed drives system. In particular, this switching strategy can work effectively for motor drives under low speed with low back EMF, where there exists a large voltage difference between peak voltage values on the grid side and the motor side. Apart from that, a hybrid fault-tolerant control scheme is also designed for the open-phase fault in dual three-phase PMSM drives system, aiming at achieving small DC-link current ripple and torque ripple, low copper loss, and machine-friendly waveform quality. With the proposed optimized SVM and the hybrid fault-tolerant control strategy, the DC-link current ripple of the cascaded CSCs system can be effectively reduced and good operational performance can be obtained under both normal operation condition and open-phase fault condition. Experimental results are provided to verify the effectiveness of the proposed methods. [ABSTRACT FROM AUTHOR]

This paper proposes a novel nonlinear optimization-based sensorless control scheme for surface-mounted permanent magnet synchronous motors (SPMSM) over wide speed range operations. Two algebraic constraints derived from the voltage equations and the flux equations of the SPMSM system are fundamental to the establishment of the proposed scheme. The position estimation algorithm generates the rotor position estimate via the stator flux estimates obtained by minimizing an equality constrained scalar function. Specifically, the flux information is extracted both from the voltage-based flux model and the current-based flux model, which contributes to its robustness against the inherent weakness of the pure integrator to dc offsets. Meanwhile, a nonlinear observer, based on the standard gradient search, is constructed for speed estimation. The proposed method is unique because the position estimation and the speed estimation are achieved independently; thus, the complexity associated with the speed dependence in position estimation is eliminated. Further, it is simple to implement. The feasibility and effectiveness of the proposed position algorithm and the speed observer have been verified by experiments under different operating conditions. [ABSTRACT FROM AUTHOR]

In this paper, fault diagnosis and fault-tolerant control strategies have been studied comprehensively for dual three-phase permanent-magnet synchronous motor (PMSM) drives to improve the reliability. Based on direct torque control (DTC) with space vector modulation, a series of diagnostic and tolerant control methods have been proposed for five types of faults, namely, speed-sensor fault, dc-link voltage-sensor fault, current-sensor fault, open-phase fault, and open-switch fault. First, diagnosis and tolerant schemes are proposed for speed-sensor fault by estimating the rotor angle speed with the rotating speed of stator flux. Second, diagnosis and tolerant schemes are proposed for dc-link voltage-sensor fault by combining the current model based stator flux observer with the voltage model based stator flux observer. Third, a three-step method is designed to diagnose three types of faults related to current signals, namely, current-sensor fault, open-phase fault, and open-switch fault simultaneously. A vector space decomposition based current estimation method is proposed to achieve fault-tolerant control for the current-sensor fault, and the voltage compensation based fault-tolerant control is presented for both open-phase and open-switch faults. The experiments have been taken on a laboratory prototype to verify the effectiveness of the proposed fault diagnosis and fault-tolerant schemes. [ABSTRACT FROM AUTHOR]

In this article, a coupled fault-tolerant control (C-FTC) is proposed for primary permanent-magnet linear motor traction system in subway applications. By coupling the faulty mover with a healthy mover, the proposed C-FTC can achieve continuous operation of the faulty mover, in which one or more current sensors fail. A healthy mover is determined as the reference mover. The switch-states of the reference mover are also applied to its mathematical model. As a result, synchronous currents of the reference mover are also estimated from its mathematical model, and they are treated as the reference currents of the mathematical model of the faulty mover. Hence, the switch-states of the faulty mover can be determined. Therefore, the faulty mover can be controlled without any current sensors. The key of C-FTC is to compensate the parameter variations and the nonlinear effects of the faulty mover drive system with those of a healthy mover drive system, which is the main contribution of this article. Comparing with the conventional current-sensorless control, C-FTC has stronger robustness to the parameter variations and the nonlinear effects. The effectiveness and robustness of the proposed C-FTC are verified by simulation and experimental results. [ABSTRACT FROM AUTHOR]