Search

This paper presents bidirectional grid-connected modular multilevel converters (MMC) with direct digital control and division-summation processes to achieve power-injection and rectification functions. A direct digital control is developed to track current references, regulate dc-bus voltage and cell voltage, and balance the upper and lower dc-bus voltages. It can accommodate wide filter-inductance variation and take care of source voltage harmonics to achieve tight current tracking and low distortion output current. Based on the power-balance principle, the commands of arm currents can be determined directly. In this paper, the MMC configuration is introduced first, and then the control laws for current tracking and voltage regulation are derived in detail. Experimental and simulated results obtained from two 50 kW MMCs operated in power-injection and rectification modes have verified the analysis and discussion. [ABSTRACT FROM AUTHOR]

This paper presents a three-phase back-to-back transformerless inverter for online uninterruptible power supply applications. The inverter consists of a three-phase three-wire input rectifier stage and a three-phase four-wire output inverter stage with their ground wires tied together. Both of the two stages are with sinusoidal pulse width modulation based division-summation (D-∑) digital control. The input stage controls the power flow between utility grid and dc link, regulates the dc-link voltage, and fulfills power factor correction. While the output stage tracks three-phase ac reference voltages. The proposed control laws derived based on the D-∑ digital approach take into account the effects of dc-link voltage fluctuation, grid-voltage distortion, and inductance variation due to different current levels. Thus, distortion of input current and output voltage, and filter inductor core size can be reduced significantly. Moreover, circulating current through their common ground can be suppressed effectively. Simulated and experimental results from a three-phase back-to-back transformerless inverter have confirmed the analysis and discussion of the proposed control approach. [ABSTRACT FROM PUBLISHER]

This study is focused on integration and operation of a single-phase bidirectional inverter with two buck/boost maximum power point trackers (MPPTs) for dc-distribution applications. In a dc-distribution system, a bidirectional inverter is required to control the power flow between dc bus and ac grid, and to regulate the dc bus to a certain range of voltages. A droop regulation mechanism according to the inverter inductor current levels to reduce capacitor size, balance power flow, and accommodate load variation is proposed. Since the photovoltaic (PV) array voltage can vary from 0 to 600 V, especially with thin-film PV panels, the MPPT topology is formed with buck and boost converters to operate at the dc-bus voltage around 380 V, reducing the voltage stress of its followed inverter. Additionally, the controller can online check the input configuration of the two MPPTs, equally distribute the PV-array output current to the two MPPTs in parallel operation, and switch control laws to smooth out mode transition. A comparison between the conventional boost MPPT and the proposed buck/boost MPPT integrated with a PV inverter is also presented. Experimental results obtained from a 5-kW system have verified the discussion and feasibility. [ABSTRACT FROM AUTHOR]

This paper presents dc-bus voltage control with a three-phase bidirectional inverter for dc distribution systems. The bidirectional inverter can fulfill both grid connection and rectification modes with power factor correction. The proposed control includes two approaches, one line-cycle regulation approach (OLCRA) and one-sixth line-cycle regulation approach (OSLCRA), which take into account dc-bus capacitance and control dc-bus voltage to track a linear relationship between the dc-bus voltage and inverter inductor current. Since both of the approaches require the parameter of dc-bus capacitance, this paper first presents determination of dc-bus capacitor size and an online capacitance estimation method. With the OLCRA, the inverter tunes the dc-bus voltage every line cycle, which can reduce the frequency of operation-mode change and current distortion. The OSLCRA adjusts current command every one-sixth line cycle to adapt to abrupt dc-bus voltage variation. The two approaches together can prevent dc-bus voltage from wide variation and improve the availability of the dc distribution systems without increasing dc-bus capacitance. Experimental results measured from a three-phase bidirectional inverter have verified the feasibility of the discussed control approaches. [ABSTRACT FROM AUTHOR]

This paper presents design and implementation of a 5-kW single-phase bidirectional inverter with wide inductance variation. For dc-microgrid applications, the bidirectional inverter has to fulfill grid connection and rectification with power factor correction to regulate the dc bus to a certain range of voltages. In the inverter operation, inductor current can vary from 0 to 32 A in one line cycle. This will result in wide inductance variation, around seven times for an inductor constructed with a molybdenum permalloy powder core, and thus, high current ripple and fluctuation. In this paper, we take into account this variation while designing controller and selecting key components to ensure inverter normal operation. Additionally, to adopt a cost-effective microcontroller for the inverter, the sensitivities of the control to various parameters are investigated and presented in this paper. Experimental results measured from a 5-kW single-phase prototype have verified the feasibility of the designed inverter. [ABSTRACT FROM PUBLISHER]