Search

Multiphase dc-excited Vernier reluctance machine (DC-VRM) exhibits the merits of robust structure, small torque ripple, and good fault-tolerant ability. Developing advanced sensorless drive methods can further promote its application in the safety-critical system. In this article, pulse injection sensorless drive methods are optimized in a six-phase DC-VRM parallel H-bridge drive system to strengthen their acceleration performance and fault-tolerant ability. The acceleration performance studied in this article corresponds to the acceleration speed during the startup stage. By the full-phase alternative pulse injection method (APIM), each phase can be excited independently to avoid mutual-inductance influence on position estimation, but this method suffers from a long communication delay and relatively poor acceleration performance. A reduced-phase APIM can reduce detection time, but the lack of detected phase may influence position estimation accuracy and fault-tolerant ability. To solve these problems, a novel vertical-axis synchronous pulse injection method is proposed and compared with previous methods in this article. The key is to inject detection pulses into vertical-axis phases simultaneously, thus reducing the detection time and improving the torque generation. It is proved that the influence of mutual inductance on position estimation can be ignored, and the detection accuracy and acceleration performance can be improved without deterioration of fault-tolerant ability. [ABSTRACT FROM AUTHOR]

This paper proposes a novel hybrid excited generator, which is suitable for a variable-speed wind power generation system. Two sets of excitation sources are employed, which are permanent magnets (PMs) on the rotor and the field windings on the stator. The rotor is design with PM-iron structure, namely the PMs and iron poles are alternatively located in rotor, which can provide PM excitation and flux modulating simultaneously. Meanwhile, the adjacent stator teeth are designed with different height, which enables the stator with flux modulating effect, and, therefore, bidirectional flux modulating can be achieved. Some specific harmonics excited by the rotor PMs can be effectively adjusted by the field current, and the back electromotive force and electromagnetic torque can be regulated accordingly. Therefore, the proposed generator can achieve constant voltage control and maximum power point tracking control by controlling the field current. The design considerations and field regulating principle are analytically investigated. An improved Tabu search algorithm is used to optimize the proposed generator, and finite-element method is used to realize preliminary study of the electromagnetic performances. A prototype is manufactured and experimental tests are conducted to verify the theoretical analysis and control strategies. [ABSTRACT FROM PUBLISHER]

This paper proposes a new brushless contra-rotating power split transmission (CR-PST) system for the direct-drive wind power generation. The core element of this system is a doubly fed dual-rotor flux-modulation permanent magnet machine, which has two contra-rotating rotors connected with two wind blades to absorb the wind energy, and two sets of stator windings to realize torque split between the two shafts. This proposed CR-PST system has compact structure and bidirectional flux-modulation design, as well as increased wind power conversion efficiency. Compared with the conventional wind turbine system, which can only work with single maximum power point tracking (MPPT) control strategy, the proposed CR-PST system can collect increased wind energy with dual MPPT method for the given wind speed. Time-stepping finite-element method is used to analyze the steady and dynamic performance of the proposed system and the control strategy is verified by experiments and simulation results. [ABSTRACT FROM PUBLISHER]