Search

This paper summarizes simulation based technical feasibility and cost benefit analyses of a range of off-the-shelf electrical losses reduction intervention solutions in the Isle of Wight (IoW) 11 kV distribution network in the United Kingdom (UK), assessed over a period of 45 years. Based on presented results, the paper provides a brief commentary on the merits, drawbacks, risks and recommendations associated with each considered network intervention. Among considered network interventions, the transformer auto stop-start scheme, where one of the transformers among a pair at a primary substation would be switched depending on the substation's varying load, was found to be the optimal solution, i.e., in reducing technical losses significantly and may also have a reasonable Net Present Value (NPV) with a good rate of Return on Investment (RoI) when fully implemented. [ABSTRACT FROM PUBLISHER]

The existing microgrid-based distribution system restoration methods follow traditional restoration criteria, which achieve a maximum coverage of distribution systems. In extreme conditions (e.g., natural disasters and physical and cyber attacks), the traditional restoration plans could pose additional financial and security risks to local utility customers. That is, restored services could be further interrupted by subsequent outages in the extended event. To address such resilience challenges, this paper proposes the formation of adaptive multimicrogrids as part of the critical service restoration strategy. The proposed strategy comprises microgrid formation (MF) and load switching sequence (LSS) steps. The MF forms multiple microgrids with minimum overall scale and radial or looped topologies and includes optimally positioned mobile emergency resources to address potential risks in extreme conditions. The LSS determines a proper load switching sequence for ensuring the system dynamic performance in the restoration process. The effectiveness of the proposed strategy is verified by a case study on the IEEE 132-node test feeder system and the time-domain simulation in MATLAB Simulink. [ABSTRACT FROM AUTHOR]

Remote-controlled switches (RCSs) play an important role in prompt service restoration of distribution systems (DSs). However, the cost of RCSs and the vast footprint of DSs limit widespread utilization of RCSs. In this paper, we present a new approach to RCS allocation for improving the performance of restoration and optimizing reliability benefits with reasonable RCS cost. Specifically, the optimal number and locations of to-be-upgraded switches can be determined with different objectives: maximizing the reduction of customer interruption cost; maximizing the reduction of system average interruption duration index; or maximizing the amount of loads that can be restored using the upgraded RCSs. We show that these models can actually be formulated as mixed-integer convex programming problems. We further introduce a novel method to equivalently transform and efficiently solve each of them. The global optimum can thus be computed within a reasonable amount of time. The IEEE 33-node and 123-node test systems are used to demonstrate the proposed models and algorithms. [ABSTRACT FROM PUBLISHER]

This paper proposes a method for studying the reliability implications of line switching operations in power systems. Two case studies are conducted on RTS and IEEE 118-bus system to illustrate this method. This method is designed to explore previously overlooked areas in reliability evaluation of line switching operations. Line removal test is proposed to obtain simulation data of the system, and then with risk analysis and impact analysis, six reliability indices are used to evaluate reliability performance of each transmission line in the system. Instead of the traditionally used mean value, this method introduces variance into analysis. Weibull distribution is used to reconstruct distributions of reliability indices which provide worst case scenario comparisons in reliability evaluation. Eventually, with results obtained from the proposed reliability evaluation method, categorization for line switching operations is introduced to classify all transmission lines based on their reliability performance. The categories provide reliability implications of line switching operations and can be used for guidance in actual operations. [ABSTRACT FROM PUBLISHER]

This paper presents a comprehensive mathematical model to solve the restoration problem in balanced radial distribution systems. The restoration problem, originally modeled as mixed integer nonlinear programming, is transformed into a mixed integer second-order cone programming problem, which can be solved efficiently using several commercial solvers based on the efficient optimization technique family branch and bound. The proposed mathematical model considers several objectives in a single objective function, using parameters to preserve the hierarchy of the different objectives: 1) maximizing the satisfaction of the demand, 2) minimizing the number of switch operations, 3) prioritizing the automatic switch operation rather than a manual one, and 4) prioritizing especial loads. General and specialized tests were carried out on a 53-node test system, and the results were compared with other previously proposed algorithms. Results show that the mathematical model is robust, efficient, flexible, and presents excellent performance in finding optimal solutions. [ABSTRACT FROM PUBLISHER]

In power system operation, network topology optimization (NTO) based on bus-branch model and opening/closing transmission lines has been previously proposed and utilized as a congestion mitigating tool to reduce operation cost. The bus-branch model cannot provide a detailed picture of all substation switching actions (e.g., bus splitting) that are well known to operators. In this paper, an NTO model based on substation and node-breaker modeling is presented to relieve congestion and consequently reduce cost. The substation reconfiguration provides a practical and realistic picture of switching actions, while having a higher flexibility in switching actions. However, due to introducing more number of nodes and binary variables associated with breakers, solving an NTO model would be challenging. Therefore, some tightening bounds are presented to maintain the reliability and accelerate the computations. Furthermore, using sensitivity analysis of substations, a method to cluster the network to congestion zones is then employed to determine suitable candidate substations for reconfiguration, thus significantly reducing the number of binary variables associated with breaker switchings. The results of applying the NTO model to the IEEE 118-bus test system demonstrate the effectiveness of the proposed method to remove congestion, while utilizing less number of switching actions compared to bus-branch switching. [ABSTRACT FROM AUTHOR]

This paper presents a model for microgrid optimal scheduling considering multi-period islanding constraints. The objective of the problem is to minimize the microgrid total operation cost which comprises the generation cost of local resources and cost of energy purchase from the main grid. The microgrid optimal scheduling problem is decomposed into a grid-connected operation master problem and an islanded operation subproblem. The microgrid capability in operating in the islanded mode for multiple hours is scrutinized by a T-\tau islanding criterion. The integer scheduling decisions determined in the master problem will be examined against the microgrid islanding feasibility in the subproblem. The scheduling decisions will be revised using proper islanding cuts if sufficient generation is not available to guarantee a feasible islanding. Islanding cuts will revise generating units, energy storage systems, and adjustable loads schedules. Any change in the schedule of adjustable loads outside the operating time interval specified by consumers is penalized by an inconvenience factor in the objective. Numerical simulations demonstrate the effectiveness of the proposed microgrid optimal scheduling model and explore its economic and reliability merits. [ABSTRACT FROM PUBLISHER]

A high impedance fault (HIF) is characterized by a small, nonlinear, random, unstable, and widely varying fault current in a power distribution system. HIFs draw very low fault currents, and hence are not always effectively cleared by conventional overcurrent relays. Various schemes are proposed to detect such faults. This paper presents a method to detect HIFs using a tool based on mathematical morphology (MM). The method is implemented alongside the conventional overcurrent relay at the substation to improve the performance of this relay in detecting HIFs. It is rigorously tested on standard test systems using PSCAD/EMTDC® to generate test waveforms, and Matlab® to implement the method. Simulation results show that the proposed method is fast, secure, and dependable. [ABSTRACT FROM PUBLISHER]

The authors discuss an article by M. Lavorato and colleagues on imposing radiality constraints in power distribution system optimization problems. They claim that the paper lacks any reference where an alternative mathematical formulation is proposed to deal with transfer nodes or zero-injection nodes. In their opinion, the possibility for transfer nodes is not realistic, being in opposition to the usual operation of the medium voltage (MV) systems where all the transfer nodes are connected to.