Search

This paper examines the operation of distribution networks that have large aggregations of thermostatically controlled loads (TCLs) providing frequency regulation to the bulk power system. Specifically, we assess the prevalence of distribution network constraint violations, such as over- or under-voltages and overloading of transformers. Our goal is to determine the set of constraints that are at increased risk of being violated when TCLs provide regulation. We compare network operation in two cases: first, with TCLs operating freely; and second, with TCLs controlled to track a regulation signal. Using GridLAB-D, we run power flow simulations of five real distribution networks. Our results indicate that voltage limits are at increased risk of violation when TCLs provide regulation because of increased voltage variation. Effects on transformer aging are more nuanced and depend on the method used for dispatching TCLs. Overall, we find that, for the networks studied, the set of constraints at risk of violation is a small subset of all network constraints. Therefore, network-protecting load control algorithms may only need to consider a small set of constraints, enhancing their computational efficiency. [ABSTRACT FROM AUTHOR]

This paper develops an effective model for microgrid optimal scheduling with dynamic network reconfiguration. Network reconfiguration can effectively alter local power flow and thus provide an opportunity to reduce microgrid distribution network losses during grid-connected operation (supporting microgrid economic objectives) and to reduce potential load curtailments during the islanded operation (supporting microgrid reliability objectives). The proposed optimal scheduling model is decomposed into a grid-connected operation master problem and an islanded operation subproblem. A novel and highly accurate dynamic linear power flow model, with the ability of line switching, is developed and included in both problems. The optimal schedule determined in the master problem is assessed to meet the microgrid islanding feasibility in the subproblem. If infeasible, the decision variables are amended using the islanding cuts, which will accordingly revise the network reconfiguration, as well as the schedule of dispatchable units, energy storage, and adjustable loads. The simulation results on a test microgrid demonstrate the effectiveness and satisfying performance of the proposed model. [ABSTRACT FROM AUTHOR]

Short-term load forecasting at the distribution level predicts the load of substations, feeders, transformers, and possibly customers from half an hour to one week ahead. Effective forecasting is important for the planning and operation of distribution systems. The problem, however, is difficult in view of complicated load features, the large number of distribution-level nodes, and possible switching operations. In this paper, a new forecasting approach within the hierarchical structure is presented to solve these difficulties. Load of the root node at any user-defined subtree is first forecast by a wavelet neural network with appropriate inputs. Child nodes categorized as “regular” and “irregular” based on load pattern similarities are then forecast separately. Load of a regular child node is simply forecast as the proportion from the parent node load forecast while the load of an irregular child node is forecast by an individual neural network model. Switching operation detection and follow-up adjustments are also performed to capture abnormal changes and improve the forecasting accuracy. This new approach captures load characteristics of nodes at different levels, takes advantage of pattern similarities between a parent node and its child nodes, detects abnormalities, and provides high quality forecasts as demonstrated by two practical datasets. [ABSTRACT FROM PUBLISHER]

In power system operation, network topology optimization (NTO) based on bus-branch model and opening/closing transmission lines has been previously proposed and utilized as a congestion mitigating tool to reduce operation cost. The bus-branch model cannot provide a detailed picture of all substation switching actions (e.g., bus splitting) that are well known to operators. In this paper, an NTO model based on substation and node-breaker modeling is presented to relieve congestion and consequently reduce cost. The substation reconfiguration provides a practical and realistic picture of switching actions, while having a higher flexibility in switching actions. However, due to introducing more number of nodes and binary variables associated with breakers, solving an NTO model would be challenging. Therefore, some tightening bounds are presented to maintain the reliability and accelerate the computations. Furthermore, using sensitivity analysis of substations, a method to cluster the network to congestion zones is then employed to determine suitable candidate substations for reconfiguration, thus significantly reducing the number of binary variables associated with breaker switchings. The results of applying the NTO model to the IEEE 118-bus test system demonstrate the effectiveness of the proposed method to remove congestion, while utilizing less number of switching actions compared to bus-branch switching. [ABSTRACT FROM AUTHOR]

Economic transmission switching has been proposed as a new control paradigm to improve the economics of electric power systems. In practice, the transmission switching operation itself is a disruptive action to the system. Frequently switching lines into or out of service can create undesirable effects on the security and reliability of power systems and may require new investments in the automation and control systems. In this paper, we formulate an economic seasonal transmission switching model where transmission switching occurs once at the beginning of a time period (season) and then the transmission topology remains unchanged during that period. The proposed seasonal transmission switching model is a large-scale mixed integer programming problem. The objective of the optimization model is to minimize the total energy generation cost over the season subject to loads and N-1 reliability requirements. We develop a novel decomposition method that decomposes the seasonal problem into one-hour problems which are then solved efficiently. We demonstrate our model and the decomposition approach on the 14-bus, 39-bus, and 118-bus power systems and show potential cost savings in each case. [ABSTRACT FROM PUBLISHER]

This paper introduces load shed recovery actions for transmission networks by presenting the dc optimal load shed recovery with transmission switching model (DCOLSR-TS). The model seeks to reduce the amount of load shed, which may result due to transmission line and/or generator contingencies, by modifying the bulk power system topology. Since solving DCOLSR-TS is computationally difficult, the current work also develops a heuristic (MIP-H), which improves the system topology while specifying the required sequence of switching operations. Experimental results on a list of N-1 and N-2 critical contingencies of the IEEE 118-bus test case demonstrate the advantages of utilizing MIP-H for both online load shed recovery and recurring contingency-response analysis. This is reinforced by the introduction of a parallelized version of the heuristic (Par-MIP-H), which solves the list of critical contingencies close to 5x faster than MIP-H with 8 cores and up to 14x faster with increased computational resources. The current work also tests MIP-H on a real-life, large-scale network in order to measure the computational performance of this tool on a real-world implementation. [ABSTRACT FROM AUTHOR]

In power system reconfiguration, the status (ON/OFF) of switches are optimized such that maximum power is delivered to loads after the occurrence of a fault. The optimized reconfiguration is achieved by prioritizing power delivered to vital loads over semi-vital and nonvital loads. The formulation presented in this paper considers a new balanced hybrid (AC and DC) shipboard power system (SPS). Analysis of the nonconvex reconfiguration formulation is done by an appropriate nonconvex solver and by convex approximation. Unlike the nonconvex solution that is based on branch-and-bound methods, convex approximation significantly reduces complexity. It is shown that for the hybrid SPS reconfiguration problem, low complexity convex approximations are effective in finding optimal solutions. Cumulative distribution function (CDF) of the power delivered to loads is presented to showcase the system robustness against random fault scenarios. A combined objective of maximizing power delivery and minimizing the number of switching actions is included in the analysis. Tradeoff between power delivered and number of switching operations after reconfiguration has been discussed at steady state. A separate analysis is also included to observe the intermediate dynamic switch states while the reconfiguration is in progress to capture the trade-off more prominently. [ABSTRACT FROM PUBLISHER]

The authors discuss an article by M. Lavorato and colleagues on imposing radiality constraints in power distribution system optimization problems. They claim that the paper lacks any reference where an alternative mathematical formulation is proposed to deal with transfer nodes or zero-injection nodes. In their opinion, the possibility for transfer nodes is not realistic, being in opposition to the usual operation of the medium voltage (MV) systems where all the transfer nodes are connected to.