Search

With increasing penetration of solar PV, some distribution feeders are experiencing highly variable net-load flows and even reverse flows. To optimize distribution systems under such conditions, the scheduling of mechanical devices, such as OLTCs and capacitor banks, needs to take into account forecasted solar PV and actual grid conditions. However, these legacy switching assets are operated on a daily or hourly timescale, due to the wear and tear associated with mechanical switching, which makes them unsuitable for real-time control. Therefore, there is a natural timescale-separation between these slower mechanical assets and the responsive nature of inverter-based resources. In this paper, we present a network admissible convex formulation for holistically scheduling controllable grid assets to position voltage optimally against solar PV. An optimal hourly schedule is presented that utilizes mechanical resources to position the predicted voltages close to nominal values, while minimizing the use of inverter-based resources (i.e., DERs), making them available for control at a faster time-scale (after the uncertainty reveals itself). A convex, inner approximation of the OPF problem is adapted to a mixed-integer linear program that minimizes voltage deviations from nominal (i.e., maximizes voltage margins). The resulting OPF solution respects all the network constraints and is, hence, robust against modeling simplifications.Simulation based analysis on IEEE distribution feeders validates the approach. [ABSTRACT FROM AUTHOR]

This paper tackles key industry needs in the scope of the AC Security-Constrained Optimal Power Flow (SCOPF) framework, specifically two major challenging requirements regarding generators’ post-contingency behavior: the (droop-based) frequency response and the voltage control mechanism (including PV/PQ switching). To this end, and to obtain a sufficiently accurate solution with a reasonable computational burden, we propose an approximation approach to SCOPF which extends significantly an existing algorithm with novel modelling elements: a continuous formulation to model generators’ post-contingency responses based on successive approximations, a technique to evaluate the viability of contingencies with respect to the base case set-points, and the complexity reduction of all post-contingency states through network compression and power flow piecewise linearization. All new features are validated both separately and in unison, to monitor the improvement of the solution time and the potential degradation of the solution's quality. The proposed approach is successfully applied to three power system network models, the largest of which consists of 2,000 buses and more than 3,000 contingencies. Finally, the trade-off between the limitations in terms of solution quality and the benefits in terms of computational effort are assessed for all proposed approximations. [ABSTRACT FROM AUTHOR]

The ever-increasing utilization of sensitive loads in the industrial, commercial, and residential areas in distribution networks requires enhanced reliability and quality of supply. This can be achieved, thanks to self-healing features of smart grids that already include the control technologies necessary for the restoration strategy in case of a fault. In this paper, an analytical and global optimization model is proposed for the restoration problem. A novel mathematical formulation is presented for the reconfiguration problem reducing the number of required binary variables while covering more practical scenarios compared to the existing models. The considered self-healing actions besides the network reconfiguration are the nodal load-rejection, the tap setting modification of voltage regulation devices (incl. OLTCs, SVR, and CBs), and the active/reactive power dispatch of DGs. The voltage dependency of loads is also considered. Thus, the proposed optimization problem determines the most efficient restoration plan minimizing the number of de-energized nodes with the minimum number of self-healing actions. The problem is formulated as a Mixed-Integer Second Order Cone Programming (MISOCP) and solved using the Gurobi solver via the MATLAB interface YALMIP. A real 83–node distribution network is used to test and verify the presented methodology. [ABSTRACT FROM AUTHOR]

To solve the coordinated dispatch and time-space coupling problem in the distribution network with distributed generations (DGs), a novel two-stage (Heuristic search and Variable correction) dynamic reactive power dispatch strategy is proposed in this paper. Meanwhile, according to the analysis of Gauss-type and Z-type membership function, a new objective function is put forward to achieve the balance between network loss and voltage deviation. First, the pre-optimization is made in Niche genetic algorithm to coordinate on-load tap changer (OLTC), capacitor banks (CBs), and DGs. Second, the sequential fuzzy c-means (SFCM) based on artificial bee colony (ABC) algorithm is proposed and then the Heuristic search based on this method is used to formulate the day-ahead plans of OLTC and CBs. Finally, the dispatch plans of OLTC and CBs are applied to recalibrate the day-ahead dispatch plans of DGs. Comparing with existing schemes, strategies and optimization approaches based on diverse evaluation indicators, optimization results on IEEE 33-bus, IEEE 14-bus, and PG&E 69-bus test systems verify the practicality and efficiency of the proposed method. In addition, the effects on the optimization results with different adjustment step and action time of the discrete adjust devices are discussed by the IEEE 33-bus test system. [ABSTRACT FROM AUTHOR]

This paper proposes a new formulation for the optimum reconfiguration of islanded microgrid (IMG) systems. The reconfiguration problem is casted as a multi-objective optimization problem, in order to: 1) minimize the IMG fuel consumption in the operational planning horizon for which islanded operation is planned; 2) ensure the IMG capability to feed the maximum possible demand by enhancing its voltage instability proximity index taken over all the states at which the islanded system may reside; and 3) minimize the relevant switching operation costs. The proposed problem formulation takes into consideration the system's operational constraints in all operating conditions based on the consideration of the uncertainty associated with renewable resources output power and load variability. Moreover, the proposed formulation accounts for droop controlled IMG special operational characteristics as well as the availability/unavailability of a supervisory microgrid central controller (MGCC). The formulated problem is solved using non-dominated sorting genetic algorithm II (NSGA-II). MATLAB environment has been used to test and validate the proposed problem formulation. The results show that the implementation of appropriate IMG reconfiguration problem formulations will enhance the performance of IMG systems and facilitate a successful integration of the microgrid concept in distribution networks. [ABSTRACT FROM AUTHOR]

This paper proposes a two-level voltage controller for large-scale power systems. The aim of the controller is to maintain a near-optimal voltage profile in the transmission network by coordinating discrete reactive power (var) control devices in the system. The controller is targeted for implementation in electric power transmission utility companies where most of the voltage controls are coordinated by switching of discrete var devices such as shunt capacitor and reactor banks and transformer banks load tap changers (LTCs). By effectively dividing the controller responsibilities between local substation controls and a central coordinator at control center level, the design is aimed at voltage control of large-scale power systems. At local level, the substation controllers maintain their respective substation bus voltages by local power-flow-like computations using mostly local PMU measurements. The central coordinator computes and provides the voltage set-points to the substation controllers and also coordinates by enabling or disabling the local controllers as needed. The controller is being designed towards prototype implementation in Southern California Edison (SCE), starting with local controllers at specific substations in the first stage. It is tested on real-time dynamic models and large-scale power-flow simulations of SCE transmission network. [ABSTRACT FROM AUTHOR]

In this paper, a flexible optimization-based framework for intentional islanding is presented. The decision is made of which transmission lines to switch in order to split the network while minimizing disruption, the amount of load shed, or grouping coherent generators. The approach uses a piecewise linear model of AC power flow, which allows the voltage and reactive power to be considered directly when designing the islands. Demonstrations on standard test networks show that solution of the problem provides islands that are balanced in real and reactive power, satisfy AC power flow laws, and have a healthy voltage profile. [ABSTRACT FROM PUBLISHER]

This paper deals with the management of voltage constraints in active distribution systems that host a significant amount of distributed generation (DG) units. To this end we propose a centralized optimization approach which aims at minimizing the amount of MW curtailment of non-firm DG to remove voltage constraints. The salient feature of this approach is that it comprehensively and properly models the full variety of possible control means (i.e., DG active/reactive power including DG shut-down, on load tap changing transformer ratio, shunt capacitor, and remotely controlled switches or breakers), most of which having a discrete behavior. We develop and compare the performances of two optimization models on a snapshot basis for various distribution systems up to 1089 buses. In particular we show that the use of remotely controlled switches so as to transfer DG between feeders in case of voltage constraints may lead to significant reduction of the DG curtailment. [ABSTRACT FROM AUTHOR]

This paper considers optimal transmission switching (OTS) to reduce generation cost by removing lines from service. A mixed integer program (MIP) has been proposed to solve the OTS problem, based on the linear direct current optimal power flow (DCOPF) model. Because of excessive computation times for large, real systems, the MIP model has been followed by some heuristics, also based on the DCOPF, to obtain near-optimal solutions quickly. However, the approximations in the DCOPF model may lead to poor choices of lines to remove from service. We assess the quality of line removal recommendations that rely on a previously published, DCOPF-based heuristic, by estimating actual cost reduction with the exact ACOPF model, using the IEEE 118-bus and 300-bus test systems with several demand levels. We also extend this heuristic to be based on the ACOPF and compare the quality of its recommendations to those of the DCOPF-based heuristic. The DCOPF-based heuristic performs very poorly in several cases, even leading to cost increases sometimes. There is a need for approximations to the ACOPF which are accurate enough to produce reliably good results for OTS heuristics, but fast enough for practical use. [ABSTRACT FROM AUTHOR]

Deploying shunt capacitor banks in distribution systems can effectively reduce the power loss and provide additional benefits for system operation. In practice, the power loss on distribution transformers can account for a considerable portion of the overall loss. This paper proposes a method for optimal placement of capacitor banks to the distribution transformers to reduce power loss. The capacitor bank locations are considered at the low-side of transformers. The net present value (NPV) criterion is adopted to evaluate the cost benefit of the capacitor installation project. First, an explicit formula for directly calculating the power loss of radial distribution systems is derived. Then, the optimal capacitor bank placement is formulated as a mixed-integer programming (MIP) model maximizing the NPV of the project subject to certain constraints. The model is suitable for being solved by commercial MIP packages, and the operational control of the capacitor banks to maximize the power loss reduction can be simply achieved by local automatic switching according to VAR measurements. The proposed method has been practically applied in the Macau distribution system, and the simulation results show that the proposed method is computationally efficient, and a considerable positive NPV can be obtained from the optimal capacitor bank placement. [ABSTRACT FROM PUBLISHER]