Search

The work reported in this paper aims at developing an algorithm for system operators to solve a robust security-constrained AC optimal power flow (R-SC-ACOPF) problem, which also optimizes the settings of discrete controllers including load tap changers (LTCs) and shunt capacitor banks (SCBs). An iterative algorithm involving a master problem and a number of sub-problems is proposed. The master problem selects the optimal discrete controllers’ settings by taking into account primal SC-ACOPF constraints based on the single-component worst contingencies identified by the sub-problems. Each sub-problem is a bi-level max-min problem used to find the current worst contingency. The overall objective is to minimize the total cost, including generation and load shedding cost, while satisfying all relevant constraints. The master problem and sub-problems allow representing LTC tap positions, SCB status, and contingencies using binary variables. Two case studies are presented as applications of this novel technique. [ABSTRACT FROM AUTHOR]

This paper proposes an optimization approach for day-ahead reactive power planning to improve voltage security in transmission networks. The problem is formulated as a voltage-secure multi-period optimal reactive power dispatch (MP-ORPD) problem. The optimization approach searches for optimal set-points of dynamic and static reactive power (var) resources. Specifically, the output includes set-points for switching shunts, transformer taps, and voltage magnitudes at the regulated buses. The primary goal is to maximize the dynamic reactive power reserve of the system, by minimizing the reactive power supplied by synchronous generators. As the size of the MP-ORPD problem increases significantly with increasing number of contingencies and time periods, efficiency is crucial for practical applications. In this paper, a decomposition technique based on consensus and alternating optimization, where integer variable targets are obtained via MILP, is used to partition the MP-ORPD problem into a set of subproblems, which can be solved in parallel to reduce the computation time. The proposed MP-ORPD problem and its solution algorithm are integrated into the EPRI-VCA software. The results of various power networks of large electric utilities in the Eastern interconnection demonstrate the effectiveness of the proposed algorithm in providing preventive control schedules. [ABSTRACT FROM AUTHOR]

Distribution power systems (DPSs) are generally unbalanced, and their loads may have notable static voltage characteristics (ZIP loads). Hence, although many papers have focused on linear single-phase power flow models, it is still necessary to study linear three-phase distribution power flow models. This paper proposes a data-driven-aided linear three-phase power flow model for DPSs. We first formulate how to amalgamate data-driven techniques into a linear power flow equation to establish our linear model. This amalgamation makes our linear model independent of the assumptions commonly used in the literature (e.g., nodal voltages are nearly 1.0 p.u.); therefore, our model is characterized by relatively high accuracy, even when the assumptions become invalid. We then demonstrate how to apply our model to DPSs with ZIP loads. We also show that with the Huber penalty function employed, the adverse impact of bad data on our model's accuracy is significantly reduced, rendering our model robust to poor data quality. Case studies demonstrate that our model is generally more accurate, with 2- to 100-fold smaller errors, than most existing linear models, and remains fairly accurate even under poor data conditions. Our model also contributes to a rapid solution to DPS analyses and optimization problems. [ABSTRACT FROM AUTHOR]

The paper introduces the concept of complex frequency. The imaginary part of the complex frequency is the variation with respect of a synchronous reference of the local bus frequency as commonly defined in power system studies. The real part is defined based on the variation of the voltage magnitude. The latter term is crucial for the correct interpretation and analysis of the variation of the frequency at each bus of the network. The paper also develops a set of differential equations that describe the link between complex powers and complex frequencies at network buses in transient conditions. No simplifications are assumed except for the usual approximations of the models utilized for the transient stability analysis of power systems. A variety of analytical and numerical examples show the applications and potentials of the proposed concept. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new mathematical model for power flow problem based on the linear and nonlinear matrix inequality theory. We start with rectangular model of power flow (PF) problem and then reformulate it as a Bilinear Matrix Inequality (BMI) model. A Theorem is proved which is able to convert this BMI model to a Linear Matrix Inequality (LMI) model along with One Nonconvex Quadratic Constraint (ONQC). Our proposed LMI-ONQC model for PF problem has only one single nonconvex quadratic constraint irrespective of the network size, while in the rectangular and BMI models the number of nonconvex constraints grows as the network size grows. This interesting property leads to reduced complexity level in our LMI-ONQC model which in turn makes it easier to solve for finding a PF solution. The non-conservativeness, iterative LMI solvability, well-defined and easy-to-understand geometry and pathwise connectivity of feasibility region are other important properties of proposed LMI-ONQC model which are discussed in this paper. An illustrative two-bus example is carefully studied to show different properties of our LMI-ONQC model. We have also tested our LMI-ONQC model on 30 different power-system cases including four ill-conditioned systems and compared it with a group of existing approaches. The numerical results show the promising performance of our LMI-ONQC model and its solution algorithm to find a PF solution. [ABSTRACT FROM AUTHOR]

This paper establishes an instantaneous voltage model to illustrate the dynamic characteristics of grid voltage in electromagnetic time scale affected by power-electronic interfaced voltage regulatory devices with two typical categories of control systems, i.e., power-current cascading control and power synchronization control, exemplified by the STATCOM and virtual synchronous condenser (VSCON) respectively. In this paper, a linearized instantaneous voltage model is firstly established to analyze the impact paths of control loops in the STATCOM and VSCON. Based on the model, the dynamic process of grid voltage is divided into three stages. Various factors on the dynamic process of grid voltage are analyzed, especially cascading control loops prior to the functioning of AC voltage control. Moreover, stiffness characteristic is proposed to evaluate the effects of power electronic interfaced voltage regulatory devices with different control structures. In addition, the effectiveness of the stiffness compensation based on the VSCON is validated by the study cases. [ABSTRACT FROM AUTHOR]

With the growing penetration of distributed renewable energy, distributed control approaches are widely utilized in voltage control of active distribution networks (ADNs), suffering from limited applicability for control devices or heavy communication burden. This paper develops an innovative distributed voltage control strategy of ADNs with global sensitivities (DVC-GS), which integrates network information from a global optimization view to coordinate energy storages, PV inverters and the OLTC with little communication and computing time. The global sensitivities of voltage violations across all buses with respect to nodal voltage and active/reactive power injection are formulated to quantify the ability of each controllable resource for alleviating voltage violations in the entire ADN. The back-and-forth communication combined with the modified DistFlow model is newly developed for the real-time update of global sensitivities at each bus with high accuracy and no iteration. Then the coordinated control of various devices is implemented on basis of global sensitivities to effectively ensure voltage security of ADNs. Comprehensive simulations based on modified 11-bus and 123-bus systems demonstrate the significant efficiency and superiority of the global sensitivities and DVC-GS. [ABSTRACT FROM AUTHOR]

Being important information of both network conditions and energy trading, distribution locational marginal prices (DLMPs) are greatly useful for distribution network (DN) management. The goal of this paper is to develop a market mechanism that motivates price-making agents to trade active and reactive power at DLMPs. According to the optimal power flow problem based on second-order cone (SOC) relaxation, we first design the market rules that allow agents to strategically submit proposals of price and power generation/consumption. The market rules induce a noncooperative game between the DN operator and distributed generators. We prove that DLMP pricing can be implemented at any generalized Nash equilibrium (GNE) of the game. We also show that economic properties of strong budget balance, individual rationality, and system cost minimization can be achieved at any GNE. A decentralized algorithm is developed to reach a GNE of the game. Further, based on the convex-concave procedure, an extension of the market mechanism is proposed to cope with the situations that SOC relaxation is inexact. In simulation, the proposed market mechanism is compared with other game-theoretic models, and the economic properties are verified. [ABSTRACT FROM AUTHOR]

Severe geomagnetic disturbances (GMDs) increase the magnitude of the electric field on the Earth’s surface (E-field) and drive geomagnetically-induced currents (GICs) along the transmission lines in electric grids. These additional currents can pose severe risks, such as current distortions, transformer saturation and increased reactive power losses, each of which can lead to system unreliability. Several mitigation actions (e.g., changing grid topology) exist that can reduce the harmful GIC effects on the grids. Making such decisions can be challenging, however, because the magnitude and direction of the E-field are uncertain and non-stationary. In this paper, we model uncertain E-fields using the distributionally robust optimization (DRO) approach that determines optimal transmission grid operations such that the worst-case expectation of the system cost is minimized. We also capture the effect of GICs on the nonlinear AC power flow equations. For solution approaches, we develop an accelerated column-and-constraint generation (CCG) algorithm by exploiting a special structure of the support set of uncertain parameters representing the E-field. Extensive numerical experiments based on “epri-21” and “uiuc-150” systems, designed for GMD studies, demonstrate (i) the computational performance of the accelerated CCG algorithm, (ii) the superior performance of distributionally robust grid operations that satisfy nonlinear, nonconvex AC power flow equations and GIC constraints, in comparison with standard stochastic programming-based methods during the out-of-sample testing. [ABSTRACT FROM AUTHOR]

Despite cascading failures being the central cause of blackouts in power transmission systems, existing operational and planning decisions are made largely by ignoring their underlying cascade potential. This paper posits a reliability-aware AC Optimal Power Flow formulation that seeks to design a dispatch point which has a low operator-specified likelihood of triggering a cascade starting from any single component outage. By exploiting a recently developed analytical model of the probability of component failure, our Failure Probability-constrained ACOPF (FP-ACOPF) utilizes the system’s expected first failure time as a smoothly tunable and interpretable signature of cascade risk. We use techniques from bilevel optimization and numerical linear algebra to efficiently formulate and solve the FP-ACOPF using off-the-shelf solvers. Extensive simulations on the IEEE 118-bus case show that, when compared to the unconstrained and N-1 security-constrained ACOPF, our probability-constrained dispatch points can significantly lower the probabilities of long severe cascades and of large demand losses, while incurring only minor increases in total generation costs. [ABSTRACT FROM AUTHOR]

This paper proposes an online voltage control strategy of distributed energy resources (DERs), based on the projected Newton method (PNM), for unbalanced distribution networks. The optimal Volt/VAr control (VVC) problem is formulated as an optimization program, with the goal of maintaining the voltage profile across the network by coordinating the VAr outputs of DERs. To overcome the slow convergence rate of conventional gradient-based methods, a PNM-based solution algorithm is developed to solve this VVC problem. It utilizes a non-diagonal symmetric positive definite matrix, developed from the Hessian matrix of the objective, to scale the gradient, and thus a fast convergence performance can be expected in this Newton-like algorithm. Moreover, taking advantage of the instantaneous feedback of voltage measurements, the online implementation of the PNM-based VVC is further designed to deal with fast system variations. In this online PNM-based VVC scheme, each bus agent communicates the instantaneous voltage measurements to the central agent, and the central agent communicates the VAr output commands of DERs back to each bus agent. The fast convergence performance of PNM results in a stronger capability to track the system variations in real time. Finally, numerical case studies are performed to validate the effectiveness, superiority, and scalability of the proposed method. [ABSTRACT FROM AUTHOR]

The wide variety of inverter control settings for solar photovoltaics (PV) causes the accurate knowledge of these settings to be difficult to obtain in practice. This paper addresses the problem of determining inverter reactive power control settings from net load advanced metering infrastructure (AMI) data. The estimation is first cast as fitting parameterized control curves. We argue for an intuitive and practical approach to preprocess the AMI data, which exposes the setting to be extracted. We then develop a more general approach with a data-driven reactive power disaggregation algorithm, reframing the problem as a maximum likelihood estimation for the native load reactive power. These methods form the first approach for reconstructing reactive power control settings of solar PV inverters from net load data. The constrained curve fitting algorithm is tested on 701 loads with behind-the-meter (BTM) PV systems with identical control settings. The settings are accurately reconstructed with mean absolute percentage errors between 0.425% and 2.870%. The disaggregation-based approach is then tested on 451 loads with variable BTM PV control settings. Different configurations of this algorithm reconstruct the PV inverter reactive power timeseries with root mean squared errors between 0.173 and 0.198 kVAR. [ABSTRACT FROM AUTHOR]

This paper provides an overview of hyperloop technologies, including a brief discussion of key components of a hyperloop system that determine the electric power requirements as a function of time. At-scale hyperloop systems do not yet exist, so a model was used to generate a set of load profiles for conceptual hyperloop realizations at four locations in the United States: two systems in California and one each in Colorado and Ohio. In all four cases, the modeled hyperloop load profiles included pulses in both active and reactive power. Grid modeling was performed to estimate the grid impacts and for discussing grid integration challenges. The paper discusses how energy storage systems might be used to eliminate the pulsating load characteristics or significantly reduce it to accommodate current grid planning guidelines. [ABSTRACT FROM AUTHOR]

The commutation failure (CF) is the most common fault in line-commutated high voltage direct current (LCC-HVDC) systems that may lead to the transient overvoltage in the sending-side system. In the worst condition, the CF may lead to large-scale wind turbine tripping. To resolve this problem, the mathematical relationship between the reactive power consumed by the rectifier and DC voltage, DC current is derived. Then, a transient overvoltage calculation method is proposed in this paper. Furthermore, the mechanism of transient overvoltage caused by the CF is analyzed; it is revealed that the reason for three times transient overvoltage is the rapid decrease of the reactive power consumed by the rectifier during the CF and the recovery period from the CF. This paper proposes a constant reactive power control (CRPC) to inhibit transient overvoltage of the sending-side AC system. The proposed CRPC can increase the reactive power consumed by the rectifier, reduce the exchange reactive power between AC and DC systems, and suppress the transient overvoltage. A simulation model in PSCAD serves to verify the proposed CRPC on the transient overvoltage suppression in the situation of different fault types, fault duration, fault severity and short circuit ratio (SCR). [ABSTRACT FROM AUTHOR]

Service restoration is one of the critical functions to enable the future self-healing distribution system. To restore the distribution system in a timely and reliable manner, the realistic system operating conditions need to be accurately characterized. In this paper, two main factors that have great impacts on distribution system restoration (DSR) in practice are investigated. First, cold load pickup (CLPU), generally caused by thermostatically controlled loads (TCLs), is a common phenomenon after an outage and shaped by the outage duration. However, the time-dependent behaviors of CLPU are rarely considered in literature. In this paper, the operating state evolution of TCLs after an outage is analyzed to characterize time-dependent CLPU. And the time-dependent CLPU is analytically embedded in DSR to accurately represent the actual behaviors of the restored loads. Second, it is difficult to predict loads that fluctuate during DSR due to the lack of real-time measurement data. Accordingly, a robust DSR based on the information gap decision theory (IGDT) is proposed to address this challenge, fully considering the uncertainty of CLPU. The proposed models are tested in IEEE 13-node and 123-node test feeders. Simulation results demonstrate that the time-dependent CLPU model and the uncertainty modeling of CLPU can accurately capture the actual behaviors of loads with TCLs after an outage, which greatly improves DSR decisions in practice. [ABSTRACT FROM AUTHOR]

The modern photovoltaic inverter has an active power-reactive power (Watt-VAr) control curve that is part of its management modes. The Watt-VAr curve, whose settings can be remotely modified, regulates the inverter reactive power output in function of its active power. This paper proposes the optimization of inverter segregated linear decision rules (LDRs), starting from the legacy Volt-VAr optimization in distribution networks. As opposed to classical LDRs that are interfaced with Volt-VAr optimization, the segregated LDRs are piecewise linear continuous curves that directly satisfy the reactive power capability of inverters, and their multiple segments can capture the correlation in solar power variability. The paper presents linear programming formulations for optimizing the segregated linear decision rules using stochastic optimization, robust optimization, and distributionally robust optimization. The optimization schemes are demonstrated on both meshed and radial networks, and their performance is validated via Monte-Carlo simulation. [ABSTRACT FROM AUTHOR]

Although distribution grid customers are obliged to share their consumption data with distribution system operators (DSOs), a possible leakage of this data is often disregarded in operational routines of DSOs. This paper introduces a privacy-preserving optimal power flow (OPF) mechanism for distribution grids that secures customer privacy from unauthorised access to OPF solutions, e.g., current and voltage measurements. The mechanism is based on the framework of differential privacy that allows to control the participation risks of individuals in a dataset by applying a carefully calibrated noise to the output of a computation. Unlike existing private mechanisms, this mechanism does not apply the noise to the optimization parameters or its result. Instead, it optimizes OPF variables as affine functions of the random noise, which weakens the correlation between the grid loads and OPF variables. To ensure feasibility of the randomized OPF solution, the mechanism makes use of chance constraints enforced on the grid limits. The mechanism is further extended to control the optimality loss induced by the random noise, as well as the variance of OPF variables. The paper shows that the differentially private OPF solution does not leak customer loads up to specified parameters. [ABSTRACT FROM AUTHOR]

In this paper, we present a novel control approach for dynamic virtual power plants (DVPPs). In particular, we consider a group of heterogeneous distributed energy resources (DERs) which collectively provide desired dynamic ancillary services such as fast frequency and voltage control. Our control approach relies on an adaptive divide-and-conquer strategy: first, we disaggregate the desired frequency and voltage control specifications of the aggregate DVPP via adaptive dynamic participation matrices (ADPMs) to obtain the desired local behavior for each device. Second, we design local linear parameter-varying (LPV) $\mathcal {H}_\infty$ controllers to optimally match this local behaviors. In the process, the control design also incorporates the physical and engineered limits of each DVPP device. Furthermore, our adaptive control design can properly respond to fluctuating device capacities, and thus include weather-driven DERs into the DVPP setup. Finally, we demonstrate the effectiveness of our control strategy in a case study based on the IEEE nine-bus system. [ABSTRACT FROM AUTHOR]

Optimal Volt/VAR control (VVC) in distribution networks relies on an effective coordination between the conventional utility-owned mechanical devices and the smart residential photovoltaic (PV) inverters. Typically, a central controller carries out a periodic optimization and sends setpoints to the local controller of each device. However, instead of tracking centrally dispatched setpoints, smart PV inverters can cooperate on a much faster timescale to reach optimality within a PV inverter group. To accommodate such PV inverter groups in the VVC architecture, this paper proposes a bi-level optimization framework. The upper-level determines the setpoints of the mechanical devices to minimize the network active power losses, while the lower-level represents the coordinated actions that the inverters take for their own objectives. The interactions between these two levels are captured in the bi-level optimization, which is solved using the Karush-Kuhn-Tucker (KKT) conditions. This framework fully exploits the capabilities of the different types of voltage regulation devices and enables them to cooperatively optimize their goals. Case studies on typical distribution networks with field-recorded data demonstrate the effectiveness and advantages of the proposed approach. [ABSTRACT FROM AUTHOR]

The time required to restore distribution systems following an extreme event is highly dependent on damage assessment. Waiting for field assessors patrolling the feeders to identify fault locations is a bottleneck in improving restoration efficiency. This paper proposes an optimal service restoration model for resilient distribution systems considering the coordination with damage assessment, as a contribution to earlier studies. The restoration actions such as fault isolation, network reconfiguration, crew mobilization and fault repair are brought forward to the damage assessment stage and the restoration schedules are dynamically updated with the reveal of the damage status. The relationship between fault location, switch status and node status is established to optimize the network topology and guarantee crew operation safety under the condition that the network has multiple faults or unchecked potential faulted areas. Moreover, the crew routing formulations are modified to enable fault isolation and load island reconnection by manual switches during the restoration process. Case studies validate the effectiveness of the proposed model in reducing load shedding and restoration duration. [ABSTRACT FROM AUTHOR]

The paper establishes convergence properties of decentralized and distributed control strategies that use a Steinmetz-based technique for mitigating voltage unbalance on distribution feeders. Reactive power from distributed energy resources (DERs), such as solar photovoltaic (PV), is used to balance voltages at critical nodes in the distribution network. Interactions between controllers are analyzed and a theoretical guarantee is derived for stability of the control algorithms. This is achieved using Banach fixed-point theory. Providing such convergence results ensures robustness of the proposed control algorithms in realistic settings where parameters are uncertain and/or slowly varying, disturbances are prevalent, and control and measurement signals are prone to delays. The convergence results are evaluated on three test distribution networks. [ABSTRACT FROM AUTHOR]

Microgrid's voltage regulation is of particular importance during both grid-connected and islanded modes of operation. Especially, during the islanded mode, when the support from the upstream grid is lost, stable voltage regulation is vital for the reliable operation of critical loads. This paper proposes a robust and data-driven control approach for secondary voltage control of AC microgrids in the presence of uncertainties. To this end, unfalsified adaptive control (UAC) is utilized to select the best stabilizing controller from a set of pre-designed controllers with the minimum knowledge required from the microgrid. Two microgrid test systems are simulated in MATLAB to verify the effectiveness of the proposed method under different scenarios like load change and communication link failure. [ABSTRACT FROM AUTHOR]

This paper presents a novel hierarchical cooperative control strategy to solve the problems of unbalanced State of Charge (SoC), unreasonable load current sharing, and unstable bus voltage for battery storage system (BSS) in islanded DC microgrid. In the communication layer, a neighbor-to-neighbor communication network architecture is constructed in which each battery storage unit (BSU) only communicates information with neighboring nodes, and a multi-agent consensus algorithm is used to iteratively estimate the relevant average global variables. In the main control layer, the droop coefficient is dynamically adjusted by constructing a fast SoC convergence function to ensure that the load current is reasonably distributed based on the rated capacity of each BSU. In the secondary control layer, a virtual voltage drop equalization controller and an average bus voltage compensation controller are designed to eliminate the impact of line impedance mismatch and compensate the average bus voltage. Furthermore, an optimized factor is designed to accelerate the later stage of SoC convergence. Finally, a DC microgrid experimental platform based on StarSim HIL is built, and the results demonstrate that the proposed strategy can achieve the control objectives of fast SoC balance, proportional load current sharing, and bus voltage stability. [ABSTRACT FROM AUTHOR]

Flexible transmission line impedances on one hand are a promising control resource for facilitating grid flexibility, but on the other hand add much complexity to the concerned optimization problems. This paper develops a convexification method for the AC optimal power flow with flexible line impedances. First, it is discovered that a flexible-impedance line is equivalent to a constant-impedance line linking a pair of transformers with correlated and continuously adjustable tap ratios. Then, with this circuit equivalent, the original optimization problem is reformulated into a semi-definite program under the existing convex relaxation framework, which improves the solution tractability and optimality in an easy-to-implement manner. The proposed method is verified by numerical tests on the IEEE 118-bus system. [ABSTRACT FROM AUTHOR]

Linear droop control is a standard approach for the decentralized operation of AC microgrids. While the traditional design of the real and reactive power droop functions does not consider economic aspects, recent approaches present modifications to enable least-cost operation. This paper proposes mixed-integer conic programming (MICP) for computing the real and reactive power droop parameters from a stochastic optimization framework that captures several snapshots of the microgrid’s operation. The model permits distributed generation to switch between grid-forming and grid-feeding modes. Unlike previous works, MICP provides droop parameters that are globally optimal for the design scenarios. Numerical results show that using traditional linear cost-based droop design methods may result in voltage magnitude violations. In contrast, the proposed method gives a solution free of violations and is yet more economical. [ABSTRACT FROM AUTHOR]

The increase in distributed energy resources and flexible electricity consumers has turned TSO-DSO coordination strategies into a challenging problem. Existing decomposition/decentralized methods apply divide-and-conquer strategies to trim down the computational burden of this complex problem, but rely on access to proprietary information or fail-safe real-time communication infrastructures. To overcome these drawbacks, we propose in this paper a TSO-DSO coordination strategy that only needs a series of observations of the nodal price and the power intake at the substations connecting the transmission and distribution networks. Using this information, we learn the price response of active distribution networks (DN) using a decreasing step-wise function that can also adapt to some contextual information. The learning task can be carried out in a computationally efficient manner and the curve it produces can be interpreted as a market bid, thus averting the need to revise the current operational procedures for the transmission network. Inaccuracies derived from the learning task may lead to suboptimal decisions. However, results from a realistic case study show that the proposed methodology yields operating decisions very close to those obtained by a fully centralized coordination of transmission and distribution. [ABSTRACT FROM AUTHOR]

Power systems are undergoing fundamental changes with increasing penetration of renewable energies. A reactive power ancillary service market is of significance to incentivize private providers, such as thermal power units and renewable power plants (RPPs), to participate in maintaining voltage security. Because of the local nature of reactive power, one of the recognized issues is that monopolistic participants may have great market power and strategically manipulate their costs. To pursue economic efficiency, this paper proposes an incentive-compatible mechanism based on Vickery-Clarke-Groves (VCG) auctions for the day-ahead reactive power ancillary service market. The obligations of reactive power ancillary service are quantified in the VCG-based market mechanism. Depending on the expected performance of participants compared with the corresponding obligations, payments are obtained for thermal power units, RPPs, and loads. Hence, providers have the incentive to declare their true costs and undertake obligations. Furthermore, a scarcity price is employed to reward the provision of scarce reactive power resources and ensure reliable market clearing. The proposed mechanism is illustrated using the IEEE 24-bus and 118-bus systems. The results verify the effectiveness of the proposed mechanism. Moreover, high rewards or penalties are observed for voltage weak areas, thereby inducing appropriate investments in reactive power capacities. [ABSTRACT FROM AUTHOR]

Bipolar VSC-MTDC is a promising solution to increase power transmission capacity and system reliability for large-scale renewable energy integration. However, traditional interpolar active power control methods cannot comprehensively explore the maximum transmission capability of the bipolar VSC-MTDC under abnormal operating conditions. Considering the flexibility of the bipolar VSC-MTDC that the positive-pole and negative-pole DC networks can be operated independently, a novel fault self-recovering control strategy is proposed in this paper to provide automatic, global and timely recovery solutions under various fault conditions: (a) Firstly, a coordinated time-driven and event-driven security monitoring, optimization and recovering control framework is proposed to guarantee the accuracy and speed of the corresponding calculation and control, hence to meet the timeliness requirement of fault self-recovery; (b) Secondly, a global optimal power allocation calculation method is proposed to automatically calculate the optimal power allocation between the positive-pole and negative-pole DC networks; (c) Thirdly, an interpolar active power dispatch method is proposed to realize the fault self-recovering control strategy based on primary control strategies of bipolar VSC-MTDC. Simulation results using MATLAB and PSCAD/EMTDC show that the proposed control strategy can timely and effectively enhance the overall power transmission capability for large-scale renewable energy integration after the fault. [ABSTRACT FROM AUTHOR]

Renewable Energy Sources (RESs) integration strengthens the need for a power network that can robustly handle the system’s uncertain scenarios. This paper proposes the first nonlinear novel dual-based bi-level approach for robust AC Transmission Expansion Planning (TEP) with uncertainties in RES generations and loads. It utilizes a convex relaxation and is solved by Benders Decomposition (BD), where the master determines the robust AC expansion plan. The novel dual slave for the second level of BD circumvents the issues in using conventional conic dual theory and aids in the worst-case realization of uncertainties using additional novel constraints. The proposed slave is solved using Interior Point Method (IPM), as it is not a mixed-integer problem. The proposed work includes additional linear constraints to speed up BD’s convergence and direct the master towards optimality. The approach is tested on several transmission systems, including the Indian Northern Regional Power Grid (NRPG) system. The robustness of the obtained plans is verified by Monte-Carlo Simulation (MCS) of the actual nonlinear and nonconvex AC Optimal Power Flow (OPF). The effect of the budget of uncertainty on the AC expansion plan is also investigated. A comparison with two previous works reveals the efficacy of the proposed approach. [ABSTRACT FROM AUTHOR]

Power systems are facing the challenges of integrating massive electric vehicles (EVs) and lacking operational flexibility. An optimal and efficient coordination strategy is needed to coordinate the operations among EV charging stations (CSs) and the distribution system operator (DSO) and to make full use of the EVs’ charging flexibility for improving the operational flexibility of power systems. To this end, this paper proposes a CSs-DSO distributed coordination strategy. The proposed strategy integrates a supply-curve-based quantification method to quantify the EVs’ flexibility contribution and a Nash bargaining game-theory-based peer-to-peer (P2P) transactions model for maximizing the profits of entities participating in the coordination. To tackle the CSs-DSO coordination problem that has a bi-level-parallel coupling structure, an analytical target cascading (ATC) and alternating direction method of multipliers (ADMM) jointly-based distributed solution approach is proposed. First, the CSs-DSO bi-level model is decoupled by ATC with tie-line power being the only exchanged information; then, the model is further decomposed for each CS by ADMM for protecting the CSs’ privacy and autonomy. The effect of coordination and the computational efficiency of the proposed strategy is verified by numerical simulations on a modified IEEE 33-bus distribution system connecting multiple CSs. [ABSTRACT FROM AUTHOR]

Distribution systems are becoming more active and provide more power support for transmission systems via their connection points at the transmission-distribution (T-D) interfaces. This paper proposes a chance constrained optimization model to estimate the flexibility area at a T-D interface. In this model, network flexibility is for the first time involved and facilitated by introducing power flow routers (PFRs) into the distribution system. The chance-constrained flexibility area (CCFA) given by the proposed model provides a description of the aggregated power dispatchability of distribution system with the guarantee of low risks of voltage violations under renewable uncertainties. We exploit the mechanism of network flexibility and reveal that it significantly reduces the voltage standard deviations, which cannot be achieved by node power flexibility. To evaluate the CCFA, an efficient two-layer iteration algorithm is designed. The inner layer finds the boundary point of CCFA along a given direction for active and reactive power. The outer layer determines those key directions to be included in the estimation as the corresponding points capture the features of the CCFA boundary. Case studies show that PFRs significantly enlarge the CCFA, which reveals that network flexibility is an important supplement to node power flexibility in T-D interaction. [ABSTRACT FROM AUTHOR]

In view of the increasing levels of renewable generation across the world, the operational dynamics of power systems are changing. One of the dimensions of this transformational change is the nature of fault ride through behavior of renewable technologies such as wind and the associated differences compared to conventional generation. This paper investigates the impacts of fault ride through behavior of wind farms on the system stability in detail, using full dynamic model of a low inertia island power system. Recorded PMU measurements are used to establish the variations in wind farm behavior during and after a fault. A detailed sensitivity analysis on the active and reactive power injection behavior of wind farms is carried out to establish the component of fault ride through behavior that is most critical to system stability, using the full model of the Ireland and Northern Ireland Power system (All island power system). Detailed investigation of the mechanics of a fault in a low inertia, wind generation dominated system is carried out to reveal potential technical scarcities. Finally, mitigations for identified scarcities arising from non-ideal fault ride through behavior of wind farms are presented in terms of Transmission System Operator led novel system services. [ABSTRACT FROM AUTHOR]

Since the wide application of virtual synchronous generators (VSGs), the power grid faces great challenges in the safe and stable operation due to their limited thermal capacity and weak anti-disturbance ability. During transient period, for example, a fault occurs in the transmission line, the VSG may lose the transient angle stability and provoke the current hard limit. Even if the fault is cleared by tripping of line, it still faces the problem of instability and voltage dips. To address this problem, in this paper, the post-fault large-signal model of VSG is derived first via the travelling waves based fault information acquisition. Subsequently, with the effect of both active and reactive power loops taken into account, a two-stage simultaneous control scheme is proposed for improving the transient stability of VSG, while considering the current limitation during fault state and voltage support after fault clearance. This method is fulfilled by mode switching and an additional feedback control based on the fault signal. Finally, the effectiveness of the proposed method under both symmetrical and asymmetrical faults is verified. Moreover, the application of the proposed method in a multiple VSGs system is also verified. Besides, the robustness to parameter mismatch and the feasible operating region for the method are discussed. [ABSTRACT FROM AUTHOR]

We consider a distributed optimal power flow formulated as an optimization problem that maximizes a nondifferentiable concave function. Solving such a problem by the existing distributed algorithms can lead to data privacy issues because the solution information exchanged within the algorithms can be utilized by an adversary to infer the data. To preserve data privacy, in this paper we propose a differentially private projected subgradient (DP-PS) algorithm that includes a solution encryption step. We show that a sequence generated by DP-PS converges in expectation, in probability, and with probability 1. Moreover, we show that the rate of convergence in expectation is affected by a target privacy level of DP-PS chosen by the user. We conduct numerical experiments that demonstrate the convergence and data privacy preservation of DP-PS. [ABSTRACT FROM AUTHOR]

Volt/VAr Optimization (VVO) is becoming increasingly crucial in distribution management systems with renewable sources that require setting their reactive power in coordination with legacy voltage and reactive power control devices. This paper presents a VVO method that operates in complex variables based on the Wirtinger calculus; it employs a penalty method that keeps voltage magnitudes and controller parameters within limits together with a probabilistic rounding technique for handling switched device variables. The complex variable implementation permits using the compensation technique when solving the Karush-Kuhn Tucker (KKT) system, thus achieving a significant speedup due to limiting the number of linear system factorizations. The proposed method is contrasted with a classical VVO implementation employing discrete coordinate search from the current operating point and an enhanced version that uses sensitivity information. Numerical results on distribution networks having up to 3147 nodes show that the proposed method is significantly faster than classical methods and gives operating points free of voltage magnitude violations and lower power loss. [ABSTRACT FROM AUTHOR]

High penetrations of photovoltaic (PV) systems can cause severe voltage quality problems in distribution networks. This paper proposes a distributed control strategy based on the dynamic formation of coalitions to coordinate a large number of PV inverters for voltage regulation. In this strategy, a rule-based coalition formation scheme deals with the zonal voltage difference caused by the uneven integration of PV capacity. Under this scheme, PV inverters form into separate voltage regulation coalitions autonomously according to local, neighbor as well as coalition voltage magnitude and regulation capacity information. To coordinate control within each coalition, we develop a feedback-based leader-follower consensus algorithm which eliminates the voltage violations caused by the fast fluctuations of load and PV generation. This algorithm allocates the required reactive power contribution among the PV inverters according to their maximum available capacity to promote an effective and fair use of the overall voltage regulation capacity. Case studies based on realistic distribution networks and field-recorded data validate the effectiveness of the proposed control strategy. Moreover, comparison with a centralized network decomposition-based scheme shows the flexibility of coalition formation in organizing the distributed PV inverters. The robustness and generalizability of the proposed strategy are also demonstrated. [ABSTRACT FROM AUTHOR]

Due to the increasing penetration of large-scale renewable energy generation at transmission level, hybrid AC/DC transmission expansion is becoming more relevant by the day, especially if the considered renewable generation is far away from existing AC grid infrastructure. This paper presents a multi-period hybrid AC/DC network expansion planning model that incorporates node voltages, reactive power and network losses. Since the operation of a high voltage DC link is influenced considerably by the converter stations, converter transformer, filter, and phase reactor are modeled in each converter station. Since the AC power flow equations render a non-convex problem whose solution algorithms do not always guarantee convergence or optimality, a second-order conic relaxation is utilized. The resulting model is a mixed-integer convex problem with a convergence guarantee that embodies a better approximation of system operation than its DC linear counterpart. Three case studies are considered to illustrate the proposed model. [ABSTRACT FROM AUTHOR]

The evolution of power distribution grids from passive to active systems creates reliability and efficiency challenges to the distribution system operators. In this paper, an energy management and control scheme for managing the operation of an active distribution grid with prosumers is proposed. A multi-objective optimization model to minimize (i) the prosumers electricity cost and (ii) the cost of the grid energy losses, while guaranteeing safe and reliable grid operation is formulated. This is done by determining the active and reactive power set-points of the photovoltaic and storage systems integrated in the grid buildings. The resulting optimization model is non-convex, thus a convex second-order cone program is developed by appropriately relaxing the non-convex constraints which yields optimal results in most operating conditions. The convexified model is further utilized to develop an algorithm that yields feasible solutions to the non-convex problem under any operating conditions. Moreover, a second novel algorithm to find the operating point that provides fairness between the prosumers and the grid costs is proposed. Simulation results demonstrate the effectiveness and superiority of the proposed scheme in managing an industrial distribution grid compared to a self-consumption approach. [ABSTRACT FROM AUTHOR]

This paper proposes a finite-time event-triggered secondary frequency and voltage control for islanded AC microgrids (MGs) in a distributed fashion. The proposed control strategy can effectively perform frequency restoration and voltage regulations, while sharing the active and reactive power among the distributed generators (DGs) based on their power ratings. The finite-time control enables a system to reach consensus in a finite period of time enhanced from the asymptotic convergence. The event-triggered communication is utilized to reduce the communication burden among the DG controllers by transmitting data among DGs if an event-triggering condition is satisfied. The performance of the proposed finite-time event-triggered frequency control is verified utilizing a hardware-in-the-loop experimental testbed which simulates an AC MG in Opal-RT. [ABSTRACT FROM AUTHOR]

Weak grid scenarios and low-inertia systems are emerging issues in power systems, which could lead to voltage and frequency instabilities. Synchronous Condensers (SynCons) have recently drawn renewed attention as a promising solution to provide system strength and inertia support. Even though the exciter control of SynCons is a well-established technology, further developments are required to guarantee the stability of post-fault operations, in particular, in weak grids. This paper proposes a data-driven approach for designing higher-order optimized exciter controllers to meet this requirement. A pseudo-random binary sequence (PRBS)-based system identification method is used to obtain frequency response data of the power system, from the exciter point of view, which is then fed into the proposed optimal control design procedure. The proposed exciter controller is tested for voltage ride-through and fault scenarios in a single machine infinite bus (SMIB) case and the IEEE 39-bus test system to assess its performance compared to the conventional AC1A exciter controller. The results obtained through simulation tests carried out using the PSCAD/EMTDC software verify that the proposed exciter controller guarantees the post-fault stability in both strong and weak grids. [ABSTRACT FROM AUTHOR]

As the inverter-based generation replaces the conventional synchronous generators, it may also need to fill in the missing ancillary service support. One of these ancillary services is dynamic reactive power provision and voltage control. This paper analyzes optimal strategy of reactive and active fault-current support of the inverter-based generation leading to fast voltage recovery of the system. For the purpose of the analysis, new ramping active current controller able to emulate different behavior of active current injection is proposed. By optimizing its parameters for different case studies of the system, the conclusions about optimal behavior of the inverter based generation with respect to system parameters and operating conditions are drawn. It is observed that the optimal combination of active and reactive fault-current is the most sensitive to the dynamic load component penetration levels in the system. With the increasing penetration levels, the significance of active fault-current injection increases. The results show that with higher penetration levels of dynamic load component in the heavy load areas, the ramping down of the inverter-based generation active fault-current results in slower voltage recovery of the system. Following this conclusion, a recommendation on update of current European grid codes is proposed. [ABSTRACT FROM AUTHOR]

The paper proposes methodology for development of dynamic equivalent model of hybrid renewable energy source (HRES) plant suitable for reliable assessment of the overall transient stability of the realistic, large power systems. Transient stability index is used for system stability assessment, and consequently for the evaluation of the model performance. The historical plant production data and transmission network short-circuit fault statistics, together with probabilistically modelled uncertainties associated with system operation, are used to generate a set of realistic dynamic responses of the plant over the period of one year. The use of clustering algorithms enabled unsupervised grouping/clustering of responses and development of the low order equivalent models in the form of a transfer function with voltage as an input and real and reactive power as outputs. The methodology is illustrated on a number of case studies using two HRES plant configurations. It is demonstrated that a very few low order dynamic models can be used to model the HRES plant during the year for sufficiently accurate transient stability assessment of the power system. The possibility of deriving these equivalent models based on forecasted HRES plant composition makes them attractive for practical application in power system dynamic security studies. [ABSTRACT FROM AUTHOR]

The icing on transmission lines threatens the power system security while the heat caused by power transmission losses can prevent icing growth. This paper proposes a preventive scheduling model for mitigating the glaze icing by optimizing the distribution of power losses on ice-coated transmission lines. An analytical glaze icing growth model is established based on the heat balance theory, which builds a direct relationship between icing growth and power transmission losses. Accordingly, the analytical glaze icing model is embedded into the proposed scheduling model to quantify the impact of power system schedules on transmission line icing and reduce the glaze icing of transmission lines. The scheduling model co-optimizes active power dispatch, demand response, and reactive power optimization for promoting the de-icing effect. To overcome the computational difficulties, the analytical glaze icing growth model is further linearized, and the Lagrangian relaxation method is adopted for identifying a practical solution. Case studies are conducted on different icing scenarios in the IEEE RTS-79 test system to verify the validity of the proposed model. Results show that the proposed preventing scheduling model can avoid the icing on transmission lines for mild ice disasters, while efficiently restraining the icing growth on transmission lines when they cannot be completely de-iced in severe storms. [ABSTRACT FROM AUTHOR]

This paper is concerned with a fuzzy analysis of power-flow (PF) involving uncertainties of load demands and network parameters. The crux of this paper is to propose an advanced fuzzy arithmetic. Fuzzy transformation method merges with backward–forward sweep in order to evaluate the contribution and propagation of uncertainty in IEEE 33-bus and 69-bus distribution systems. Results are validated by true intervals and random ranges. To determine true intervals, Global Optimization Problems (GOPs) are defined and solved through derivative-based and free techniques. To estimate random ranges, Monte-Carlo Simulations (MCSs) are employed. Our findings confirm that the sharpness of fuzzy intervals, tractability of computations, and applicability of possibility distributions. Following scenario-based evaluations, this paper discusses new implications of power losses, voltage profiles, optimal re-configuration, feeder extension, and reactive power compensation so that results would be beneficial to system planners and operators. Altogether, this paper provides a blueprint for a new way to handle uncertainties in a wide variety of power system problems without global optimization, linearization, and randomized simulations. [ABSTRACT FROM AUTHOR]

The paper considers the problem of sub-synchronous resonances (SSR) in doubly fed induction generators connected to the grid through series-compensated lines. The existence of oscillations is observed on a laboratory test-bed in various conditions, with instabilities developing in the worst-case scenario. Despite the limitations of a small-scale test-bed, the ability to investigate problems and solutions in ways that would not be possible on a full-scale system is very valuable. In particular, the paper demonstrates the significant effect of the choice of dq reference frame on the severity of SSR. Stator-aligned algorithms are found to be significantly more resonant than grid-oriented algorithms, as evidenced in experiments as well as using an analysis method proposed in the paper. From this observation, an algorithm is proposed to emulate a grid-alignment using stator voltages and currents, but without measurements of the grid and series-capacitor voltages. Two control laws are then presented to regulate the active and reactive powers generated, resulting in well-damped transient responses. SSR oscillations are found to be eliminated in experime, as well as simulations of a full-scale system and using a frequency response analysis of the closed-loop system. The effectiveness of the proposed control schemes is verified through experiments for different compensation levels and varying speeds. Within the assumptions made in the design, the proposed controllers are global. [ABSTRACT FROM AUTHOR]

Traditional power flow algorithms assume that a slack bus is present and that the frequency is not fluctuating. In islanded industrial systems and microgrids, however, these assumptions are not valid because such systems usually do not have a strong source performing as the slack bus and the system frequency is more prone to vary near nominal frequency. Considering these characteristics, this paper presents a novel universal power flow (UPF) algorithm for industrial systems and microgrids as well as traditional systems, with a focus on active power. Development of a reactive power UPF algorithm will be presented in a subsequent paper. The proposed UPF model has the following merits: first, it can handle islanded and grid-connected systems at nominal or off-nominal frequency; second, it can handle the active control strategies of distributed generators (DGs), such as isochronous (ISOC) control, droop control, or constant power control; third, it can handle the megawatt and megavolt-ampere reactive limitations of ISOC or droop DG units; fourth, it can evaluate system frequency; and finally, it can handle frequency-dependent active and reactive power loads. The proposed UPF model is validated by comparing the results with those obtained from a real-time simulator. [ABSTRACT FROM AUTHOR]

Variability in power generation at multiple consumer-owned renewable energy sources can cause random voltage fluctuations, which may result in voltage violations at multiple nodes in a power distribution system. Traditional methods of voltage control are ineffective to address fast voltage variations. New dynamic methods of voltage control using end-user devices can significantly benefit from the knowledge of the dominant influencer of voltage fluctuation (DIVF). This paper introduces information theoretic metrics to identify DIVF for every node in the power distribution system. A node can be DIVF due to its location in the distribution system and its capacity to generate and change its power. Use of traditional power flow algorithms to identify the DIVF is computationally complex, which limits their use in real-time applications. In this paper, information theoretic indicators of the DIVF are computed analytically in a computationally efficient manner, and their effectiveness to identify the DIVF is tested using the IEEE 69 node test system. From simulations, it is shown that differential entropy, Kullback–Leibler distance, and Frechet distance are effective indicators of the DIVF and can successfully identify the most influential nodes providing the foundation for intelligent voltage control. [ABSTRACT FROM AUTHOR]

This paper proposes a two-stage energy management scheme (EMS) for AC–DC hybrid smart distribution systems (DSs). The proposed EMS is formulated as a multi-objective optimization problem to minimize the DS operation costs and energy losses. The proposed EMS is achieved in two stages. In the first stage, a network reconfiguration algorithm determines the optimal day-ahead reconfiguration schedule for a hybrid DS. In the second stage, a real-time optimal power flow algorithm determines the real-time operational schedule of the energy resources. This paper also introduces a new linearized power flow model for AC–DC hybrid DSs. This new model facilitates the formulation of the first-stage algorithm as a mixed-integer linear programming problem and the formulation of the second-stage algorithm as a linear programming problem. The proposed two-stage EMS was tested on a case study of a hybrid DS that included different types of loads and distributed generators. The results demonstrate the efficacy of the proposed EMS: the optimal day-ahead reconfiguration schedule was successfully obtained in the first stage, and the proper and optimal real-time operation was achieved in the second stage. [ABSTRACT FROM AUTHOR]

This paper presents a two-timescale multi-objective coordinated volt/var optimization system for active distribution networks with renewable energy resources (RESs). In the hourly timescale, power loss and the number of control actions of on-load tap changers and (switchable) shunt capacitors for 24 h are minimized by coordinating on-load tap changers, (switchable) shunt capacitors, and reactive power outputs of RESs. A three-step method consisting of global search, user preference, and local search is adopted to solve the corresponding multi-objective mixed-integer nonlinear optimization problem. A rolling volt/var optimization is executed every 6 h, considering the day-ahead RES forecast errors. In the 15-min timescale, the RES reactive powers are optimized with RES uncertainties explicitly taken into consideration to minimize the pilot-bus voltage deviation under all representative scenarios. The pilot buses are those buses whose voltage magnitudes capture the network voltage profile. In this paper, a linear method is applied to quickly identify a set of pilot buses, and the impact of the identified pilot bus on the entire network voltage profile is evaluated. The IEEE 33-bus distribution network is used to evaluate the proposed two-timescale volt/var optimization formulations and methods with promising results. [ABSTRACT FROM AUTHOR]