Search

This paper proposes a multifunctional control strategy and associated control algorithms for distributed wind-turbine (WT) based nano-grids connected to a distorted utility-grid. The contribution is on a new strategy with innovative control algorithms to coordinate multiple converters for a multitasking operation of the nano-grids. The novelty is on a unique control design with feasibilities: maximizing the generated power from WT, maintaining power quality in both ac- and dc-sides under critical conditions of the power grid, and improving power quality against distortion from local nonlinear loads under a reduced switching frequency. A robust fast-dynamic predictive control method is developed for current controllers to fulfil the multifunction. Unconstrained deadbeat control inputs are derived in twofold targets: ensuring fast dynamic response and significantly reducing both the computation and switching frequency for finite predictive control. The control system is applied on a permanent-magnet synchronous generator (PMSG) WT-based nano-grid connected to a distorted utility-grid. An OPAL-RT-based real-time platform is used for comparative studies among the proportional integration (PI) control, finite predictive control (FS-MPC), and proposed control method. The performance verification exhibits the power quality improvement in both the nano- and utility-grids under critical conditions via high-performed regulation of currents, voltages, reactive power, and rotor-speed of the PMSG-WT. [ABSTRACT FROM AUTHOR]

The new IEEE 1547-2018 standard includes dynamic Volt/VAr control for photovoltaic (PV) smart inverters. While recent research has addressed the problem of optimal inverter dispatch, the interaction between inverters and the classical Volt/VAr control (VVC) regulation system needs further study. This paper proposes an approach that builds on the classical VVC solution with PVs, by computing for each inverter a rule that modulates the smart inverter reactive power in function of its real power. Two approaches are presented for computing the inverter's reactive power equation slope: the first approach is based on the robust minimization of the absolute voltage magnitude deviation via a linear program, whereas the second approach yields closed-form solutions inspired from distributionally robust chance constraints. Numerical results are presented on weakly meshed distribution networks having up to 3146 nodes; they demonstrate that the voltage violations due to intermittent real power variations are significantly reduced by the decision rules as compared to maintaining the last computed VVC set-points, even when the inverters operate at constant power factor or with default Volt/VAr settings proposed in the literature; additionally, the reactive power decision rules maintain a network loss level that is close to the average from a centralized solution. [ABSTRACT FROM AUTHOR]

This paper examines the operation of distribution networks that have large aggregations of thermostatically controlled loads (TCLs) providing frequency regulation to the bulk power system. Specifically, we assess the prevalence of distribution network constraint violations, such as over- or under-voltages and overloading of transformers. Our goal is to determine the set of constraints that are at increased risk of being violated when TCLs provide regulation. We compare network operation in two cases: first, with TCLs operating freely; and second, with TCLs controlled to track a regulation signal. Using GridLAB-D, we run power flow simulations of five real distribution networks. Our results indicate that voltage limits are at increased risk of violation when TCLs provide regulation because of increased voltage variation. Effects on transformer aging are more nuanced and depend on the method used for dispatching TCLs. Overall, we find that, for the networks studied, the set of constraints at risk of violation is a small subset of all network constraints. Therefore, network-protecting load control algorithms may only need to consider a small set of constraints, enhancing their computational efficiency. [ABSTRACT FROM AUTHOR]

Smart inverters provide additional control capability to help optimize the operation of distribution systems. This paper proposes a framework for exact optimal active and reactive power dispatch of distributed photovoltaic (PV) generation, switched capacitors, and voltage regulators in large multi-phase unbalanced distribution systems. The objectives of the optimal dispatch are minimization of the energy loss, PV active power curtailment, and operations of capacitors and voltage regulators, in addition to elimination of voltage violations and reverse power flow. The optimization problem is formulated in rectangular coordinates as a nonlinear, nonconvex problem. Effective computational strategies are proposed to allow the application of predictor-corrector primal-dual interior point method to solve optimization problems in real-time with a large number of constraints and variables, including discrete variables corresponding to switched capacitors and voltage regulators. The accuracy of the numerical solution and the ability to implement the proposed framework are validated using the unbalanced multi-phase IEEE 34-bus and EPRI 2,998-bus distribution systems with 15-minute load and PV data. The results show a significant loss reduction and elimination of both voltage violations and reverse power flow. [ABSTRACT FROM AUTHOR]

This paper studies the optimal transmission switching (OTS) problem for power systems, where certain lines are fixed (uncontrollable) and the remaining ones are controllable via on/off switches. The goal is to identify a topology of the power grid that minimizes the cost of the system operation while satisfying the physical and operational constraints. Most of the existing methods for the problem are based on first converting the OTS into a mixed-integer linear program (MILP) or mixed-integer quadratic program (MIQP), and then iteratively solving a series of its convex relaxations. The performance of these methods depends heavily on the strength of the MILP or MIQP formulations. In this paper, it is shown that finding the strongest variable upper and lower bounds to be used in an MILP or MIQP formulation of the OTS based on the big- $M$ or McCormick inequalities is NP-hard. Furthermore, it is proven that unless $P=NP$ , there is no constant-factor approximation algorithm for constructing these variable bounds. Despite the inherent difficulty of obtaining the strongest bounds in general, a simple bound strengthening method is presented to strengthen the convex relaxation of the problem when there exists a connected spanning subnetwork of the system with fixed lines. With the proposed bound strengthening method, remarkable improvements in the runtime of the mixed-integer solvers and the optimality gaps of the solutions are achieved for medium- and large-scale real-world systems. [ABSTRACT FROM AUTHOR]

Inadequate frequency response can arise due to a high penetration of wind turbine generators (WTGs) and requires a frequency support function to be integrated in the WTG. The appropriate design for these controllers to ensure adequate response has not been investigated thoroughly. In this paper, a safety supervisory control (SSC) is proposed to synthesize the supportive modes in WTGs to guarantee performance. The concept, region of safety (ROS), is stated for safe switching synthesis. An optimization formula is proposed to calculate the largest ROS. By assuming a polynomial structure, the problem can be solved by a sum of squares program. A feasible result will generate a polynomial, the zero sublevel set of which represents the ROS and is employed as the safety supervisor. A decentralized communication architecture is proposed for small-scale systems. Moreover, a scheduling loop is suggested so that the supervisor updates its boundary with respect to the renewable penetration level to be robust with respect to variations in system inertia. The proposed controller is first verified on a single-machine three-phase nonlinear microgrid, and then implemented on the IEEE 39-bus system. Both results indicate that the proposed framework and control configuration can guarantee adequate response without excessive conservativeness. [ABSTRACT FROM AUTHOR]

Direct current (DC) network has been recognized as a promising technique especially for shipboard power systems (SPSs). Fast resilience control is required for an SPS to survive after faults. Towards this end, this paper proposes the indices of survivability and functionality based on which a two-phase resilience control method is derived. The on/off status of loads is determined in the first phase to maximize survivability, while the functionality of supplying loads are maximized in the second phase. Based on a comprehensive model of a DC-SPS, the two-phase method renders two mixed-integer non-convex problems. To make the problems tractable, we develop second-order-cone-based convex relaxations, thus converting the problems into mixed-integer convex problems. Though this approach does not necessarily guarantee feasible, hence global, solutions to the original nonconvex formulations, we provide additional mild assumptions, which ensures that the convex relaxations are exact when the line constraints are not binding. In the case of inexactness, we provide a simple heuristic approach to ensure feasible solutions. Numerical tests empirically confirm the efficacy of the proposed method. [ABSTRACT FROM AUTHOR]

Conventional electromagnetic transient (EMT) and phasor-domain hybrid simulation approaches presently exist for transmission system level studies. Their simulation efficiency is generally constrained by the EMT simulation. With an increasing number of distributed energy resources and nonconventional loads being installed in distribution systems, it is imperative to extend the hybrid simulation application to include distribution systems and integrated transmission and distribution systems. Meanwhile, it is equally important to improve the simulation efficiency as the modeling scope and complexity of the detailed system in the EMT simulation increases. To meet both requirements, this paper introduces an advanced EMT and phasor-domain hybrid simulation approach. This approach has two main features: first, a comprehensive phasor-domain modeling and simulation framework which supports positive-sequence, three-sequence, three-phase, and mixed three-sequence/three-phase representations and second, a robust and flexible simulation mode switching scheme. The developed scheme enables simulation switching from hybrid simulation mode back to pure phasor-domain dynamic simulation mode to achieve significantly improved simulation efficiency. The proposed method has been tested on integrated transmission and distribution systems. The results show that with the developed simulation switching feature, the total computational time is significantly reduced compared to running the hybrid simulation for the whole simulation period while maintaining good simulation accuracy. [ABSTRACT FROM AUTHOR]

A novel method is proposed to locate the source of events in power distribution systems by using distribution-level phasor measurement units, a.k.a., micro-PMUs. An event in this paper is defined rather broadly to include any major change in any component across the distribution feeder. The goal is to enhance situational awareness in distribution grid by keeping track of the operation (or misoperation) of various grid equipment, assets, distribution energy resources, loads, etc. The proposed method is built upon the compensation theorem in circuit theory to generate an equivalent circuit to represent the event by using voltage and current synchrophasors that are captured by micro-PMUs. Importantly, this method makes critical use of not only magnitude but also synchronized phase angle measurements, thus, it justifies the need to use micro-PMUs, as opposed to ordinary RMS-based voltage and current sensors. The proposed method can work with data from as a few as only two micro-PMUs. The effectiveness of the developed method is demonstrated through computer simulations on the IEEE 123-bus test system, and also on micro-PMUs measurements from a real-life 12.47 kV test feeder in Riverside, CA. The results verify that the proposed method is accurate and robust in locating the source of different types of events on power distribution systems. [ABSTRACT FROM AUTHOR]

This paper develops an effective model for microgrid optimal scheduling with dynamic network reconfiguration. Network reconfiguration can effectively alter local power flow and thus provide an opportunity to reduce microgrid distribution network losses during grid-connected operation (supporting microgrid economic objectives) and to reduce potential load curtailments during the islanded operation (supporting microgrid reliability objectives). The proposed optimal scheduling model is decomposed into a grid-connected operation master problem and an islanded operation subproblem. A novel and highly accurate dynamic linear power flow model, with the ability of line switching, is developed and included in both problems. The optimal schedule determined in the master problem is assessed to meet the microgrid islanding feasibility in the subproblem. If infeasible, the decision variables are amended using the islanding cuts, which will accordingly revise the network reconfiguration, as well as the schedule of dispatchable units, energy storage, and adjustable loads. The simulation results on a test microgrid demonstrate the effectiveness and satisfying performance of the proposed model. [ABSTRACT FROM AUTHOR]

This paper introduces a network topology identification (TI) method based on deep neural networks (DNNs) for online applications. The proposed TI DNN utilizes the set of measurements used for state estimation to predict the actual network topology and offers low computational times along with high accuracy under a wide variety of testing scenarios. The training process of the TI DNN is duly discussed, and several deep learning heuristics that may be useful for similar implementations are provided. Simulations on the IEEE 14-bus and IEEE 39-bus test systems are reported to demonstrate the effectiveness and the small computational cost of the proposed methodology. [ABSTRACT FROM AUTHOR]

Line-switching operations introduce several concerns to microgrid operators since they trigger reliability and power quality issues in addition to increasing the wear and tear cost of switching devices. This paper proposes a novel methodology for achieving seamless line-switching in low-inertia islanded microgrids. The proposed methodology aims at mitigating the detrimental line-switching impacts by minimizing the power flow in the switched lines at the moments of executing the switching operations. The minimization of the power flow is realized by optimizing the droop control parameters of the DGs during the transition from one network topology to another. Besides, during executing a series of line-switching operations, the sequence of switching is also optimized to minimize the total switched power. While optimizing the line-switching execution sequence, the transitional droops are optimized for each line-switching operation within that sequence. A dynamic mixed-integer nonlinear programming problem is formulated to find both the optimized dynamic transitional droops and line-switching sequence simultaneously. Simulation results demonstrate the effectiveness of the proposed seamless line-switching methodology where the switched power can be reduced by more than 80% for a single line-switching operation and 54% considering a series of four switch exchanges in addition to achieving several instances of zero-current switching. As a result, a significant decrease in the peak of voltage transients has been recorded for some cases. [ABSTRACT FROM AUTHOR]

In this paper, we propose a topology-cognizant optimal power flow (OPF) paradigm with additional safety constraints for multi-terminal direct current (MTDC) grids. The resulting formulation is concerned with the optimization of controller set-points, i.e., voltage and power levels at each bus, and the switching status of transmission lines that collectively referred to as grid topology. A pair of additional safety constraints are integrated into the problem formulation to prevent voltage violations caused by power fluctuations in between two controller set-point updates. Searching for a grid topology that offers more efficient operation leads to a mixed-integer nonlinear program (MINLP) which is computationally challenging due to: i) Non-convex power flow equations, (ii) Non-convex converter loss equations, and iii) Binary variables accounting for the operational status of transmission lines. Non-convexities of power flows and converter loss equations are tackled by means of a mixed-integer second-order cone programming (MISOCP) relaxation, while the optimal switching status of transmission lines are determined via a branch-and-bound search. Numerical results for the modified IEEE 14, 30, and 57-bus systems are used to verify the merits of the proposed method. Furthermore, this method is experimentally validated using the CIGRE B4 DC grid benchmark in a real-time hardware-in-the-loop platform. [ABSTRACT FROM AUTHOR]

In this paper, a methodology to solve the optimal reactive power dispatch (ORPD) in electric power systems (EPS), considering discrete controllers, is proposed. Discrete controllers, such as the tap position of on-load tap changing (OLTC) transformers and switchable reactive shunt compensation, are optimized by the proposed method. A semidefinite relaxation (SDR) of the ORPD problem and a branch-and-bound (B&B) algorithm have been fully deployed. A new formulation is presented for the OLTC transformers to obtain a connected structure of the semidefinite programming (SDP) matrices. The customized B&B algorithm deals with the discrete nature of the binary control variables. Moreover, in order to enhance the convexification, valid inequalities called lifted nonlinear cuts (NLC) are implemented in the SDR. Additionally, a chordal decomposition technique is used to improve the computational performance. Finally, the B&B algorithm is used to solve the mixed-integer semidefinite programming problem. Several benchmarks have been used to show the accuracy and scalability of the proposed method, and convergence analysis shows that near-global optimal solutions are generated with small relaxation gaps. [ABSTRACT FROM AUTHOR]

Reserve requirements serve as a proxy for N-1 reliability in the security-constrained unit commitment (SCUC) problem. However, there is no guarantee that the reserve is deliverable for all scenarios (post-contingency states). One cheap way to improve reserve deliverability is to harness the flexibility of the transmission network. Flexible AC transmission system (FACTS) devices are able to significantly improve the transfer capability. However, FACTS utilization is limited today due to the complexities these devices introduce to the DC optimal power flow problem (DCOPF). With a linear objective, the traditional DCOPF is a linear program (LP); when variable impedance based FACTS devices are taken into consideration, the problem becomes a nonlinear program (NLP). A reformulation of the NLP to a mixed integer linear program, for day-ahead corrective operation of FACTS devices, is presented in this paper. Engineering insight is then introduced to further reduce the complexity to an LP. Although optimality is not guaranteed, the simulation studies on the IEEE 118-bus system show that the method finds the globally optimal solution in 98.8% of the cases. Even when the method did not find the optimal solution, it was able to converge to a near-optimal solution, which substantially improved the reliability, very quickly. [ABSTRACT FROM PUBLISHER]

Transmission systems are under stress and need to be upgraded. Better utilization of the existing grid provides a fast and cheap alternative to building new transmission. One way to improve the utilization of the transmission network is power flow control via flexible ac transmission system (FACTS) devices. While FACTS devices are used today, the utilization of these devices is limited; traditional dispatch models (e.g., security constrained economic dispatch) assume a fixed, static transmission grid even though it is rather flexible. The primary barrier is the complexity that is added to the power flow problem. The mathematical representation of the DC optimal power flow, with the added modeling of FACTS devices, is a nonlinear program (NLP). This paper presents a method to convert this NLP into a mixed-integer linear program (MILP). The MILP is reformulated as a two-stage linear program, which enforces the same sign for the voltage angle differences for the lines equipped with FACTS. While this approximation does not guarantee optimality, more than 98% of the presented empirical results, based on the IEEE 118-bus and Polish systems, achieved global optimality. In the case of suboptimal solutions, the savings were still significant and the solution time was dramatically reduced. [ABSTRACT FROM AUTHOR]

With the expansion and enhancement of the power transmission network, short-circuit current (SCC) has become a major concern in grid operations. While transmission switching is one effective solution to reduce the SCC without investing in additional equipment, switching lines could threaten system N-1 security. To find an efficient, and secure, yet economic switching solution, this paper proposes an optimal transmission switching model with SCC limitation and N-1 reliability. As the relationship between SCC and integer variables associated with the line states is coupled, nonlinear and difficult to explicitly express, an effective linearization method is proposed. Theoretical analysis of the linearization error is performed using an illustrative example. Case studies have shown that the linearization error is generally small and decreases rapidly with the increase of electrical distance. Based on the linearized expression for SCC, a transmission switching model with SCC limitation and N-1 reliability constraints is proposed. Furthermore, to assure the calculation accuracy for the SCC, an iterative algorithm is designed to compensate for the linearization error. Case studies on the modified IEEE 30-bus, 118-bus and practically-sized 300-bus systems validate the effectiveness of the proposed model and algorithm. The solving efficiency of the model is investigated and discussed as well. [ABSTRACT FROM PUBLISHER]

Most existing approaches for distribution network reconfiguration assume that the distribution system is (three-phase) balanced and a single-phase equivalent is used. However, distribution feeders are usually unbalanced due to a large number of single-phase loads, nonsymmetrical conductor spacing, and three-phase line topology. This paper builds on our previous work and studies feeder reconfiguration for unbalanced distribution systems with distributed generation (DG). The three-phase bus locations and sizes of DG units are determined using sensitivity analysis and nonlinear programming, respectively, and distribution feeders are reconfigured every hour based on the status of time-varying loads, output power from DG units and faults on the network while minimizing the energy loss costs and DG operating costs. Simulation results show the effectiveness and computational efficiency of the proposed approach. [ABSTRACT FROM AUTHOR]

The European Union is targeting a 20% share of energy from renewable resources by 2020, and this increase is in turn expected to lead to operational challenges that will require various congestion management actions by system operators. In this paper, we deal with topology control of the transmission network as a congestion management resource and evaluate the impacts of topology control on the European electricity network. To do this, we co-optimize unit commitment and transmission switching over 24 h, and we use a decomposition scheme to tackle the resulting large-scale problem. Our analysis is conducted on different scenarios of load and renewable power generation. We find that topology control results in significant cost savings within Europe which tend to be inversely related to net load. The robustness of our results is supported by an extensive sensitivity analysis. [ABSTRACT FROM AUTHOR]

Optimal transmission switching (OTS) optimizes simultaneously the generation dispatch and the topology of a power system. It has been shown that taking some transmission lines out of service can significantly reduce the operating cost of the system while respecting the traditional deterministic N-1 security criterion of operational reliability. However, topology modifications could adversely affect probabilistic security metrics. The operational reliability of a power system can be translated into a cost by multiplying the expected energy not served by the value of lost load. This paper therefore explores whether it is possible to maintain a positive economic balance with OTS when considering not only the cost of generation but also the expected socio-economic cost of disruptions in the supply. This is done in two steps: the computation of an N-1 secure OTS and then the calculation of a probabilistic estimate of the operational reliability of the OTS solution. Based on the results obtained with two test systems, it is shown that OTS tends to significantly degrade probabilistic measures of security. It is thus not obvious that OTS can lead to a positive economic balance, even when N-1 security is enforced. Consequently, a probabilistic security analysis should be performed before implementing an OTS solution. [ABSTRACT FROM AUTHOR]

In this paper, a novel solution method is proposed for the optimal topology control problem in AC framework with N-1 reliability. The resultant new topology of the proposed method is guaranteed to yield a better objective function value than the global solution of the problem with the original topology. In order to prove our statement, semi-definite programming relaxation is formulated to find a lower bound to the objective function value of the problem. The proposed method is favorable for parallelization to increase the computational efficiency, and the parallel computing flowchart is presented. Computational time of the algorithm for IEEE test cases is reported. An in-house power market simulator is developed to simulate a market environment complete with optimal topology control mechanism. Simulations held by participating human subjects are analyzed under the subtitles of the total operating cost, real power losses, and locational marginal price (LMP) variance. A simple example is illustrated to show that the resultant network topology may increase the real power losses while still providing a lower operating system cost than that of the original topology. [ABSTRACT FROM PUBLISHER]

With the increasingly high demand for well-trained power systems engineers, the University of Pittsburgh has partnered with Eaton in the creation of the new Electric Power Systems Laboratory at the Swanson School of Engineering. This laboratory demands the capability to perform a wide variety of experimental procedures while providing students and researchers with a seamless working environment. To accomplish that goal, a novel lab workbench was developed. This lab workbench integrates the load banks necessary for laboratory procedures with advanced metering, controls and safety features, and contains them within a work station ideally suited for the laboratory space. This paper details the development of those lab workbenches, from concept, to design, to prototype construction, to testing. Additionally, this work describes planned classroom experiments utilizing the developed bench. Ultimately the realized workbench demonstrates its capability to be reconfigured to suit the demands of both education as well as new research projects for undergraduate and graduate studies. [ABSTRACT FROM PUBLISHER]

Demand response can be used for providing regulation services in the electricity markets. The retailers can bid in a day-ahead market and respond to real-time regulation signal by load control. This paper proposes a new stochastic ranking method to provide regulation services via demand response. A pool of thermostatically controllable appliances (TCAs) such as air conditioners and water heaters are adjusted using direct load control method. The selection of appliances is based on a probabilistic ranking technique utilizing attributes such as temperature variation and statuses of TCAs. These attributes are stochastically forecasted for the next time step using day-ahead information. System performance is analyzed with a sample regulation signal. Network capability to provide regulation services under various seasons is analyzed. The effect of network size on the regulation services is also investigated. [ABSTRACT FROM PUBLISHER]

Due to the significant variability and uncertainty of wind power over short time scales, high penetration of wind power can be problematic in an electric grid. One of the critical issues is how to keep increasing wind penetration without jeopardizing grid security and reliability. This paper explores the possibility of changing transmission network topology, by transmission switching, to accommodate higher utilization of wind power and reduce the generation costs of thermal units. Considering the uncertainty in wind power output, we use chance constraints to ensure that the wind energy utilized exceeds a minimal usage level at a certain probability. We develop a deterministic approximation approach using sample average approximation and provide a strong extended formulation. Numerical results show the potential benefit the proposed model can achieve. [ABSTRACT FROM PUBLISHER]

Economic transmission switching has been proposed as a new control paradigm to improve the economics of electric power systems. In practice, the transmission switching operation itself is a disruptive action to the system. Frequently switching lines into or out of service can create undesirable effects on the security and reliability of power systems and may require new investments in the automation and control systems. In this paper, we formulate an economic seasonal transmission switching model where transmission switching occurs once at the beginning of a time period (season) and then the transmission topology remains unchanged during that period. The proposed seasonal transmission switching model is a large-scale mixed integer programming problem. The objective of the optimization model is to minimize the total energy generation cost over the season subject to loads and N-1 reliability requirements. We develop a novel decomposition method that decomposes the seasonal problem into one-hour problems which are then solved efficiently. We demonstrate our model and the decomposition approach on the 14-bus, 39-bus, and 118-bus power systems and show potential cost savings in each case. [ABSTRACT FROM PUBLISHER]

This paper presents an evaluation tool for demand-side management of domestic hot water systems in distribution systems. The tool accurately models and predicts potential peak demand reductions through direct load control of domestic hot water systems. It employs a unique multi-layer thermally stratified hot water cylinder model and Monte Carlo simulations to generate hot water load profiles of domestic customers. To meet peak reduction targets set by the tool user, switching programs found via iterative optimizations are applied to hot water systems. The structure and individual components of the tool are described, and case studies are presented. Impacts of different switching programs on customer's comfort are evaluated and discussed. [ABSTRACT FROM PUBLISHER]

This paper proposes a novel method for topology detection in distribution networks called the Time-series signature verification method for topology detection (TSV-Top). The TSV-Top analyzes data from phasor measurement units (PMU or $\mu$ PMU) installed on power distribution feeders. The TSV-Top relies on the fact that measurement data time series from power systems contain similar trends when network topology changes occur, and basically performs the projection of actual voltage phasorial patterns onto a library of signals associated with possible topology transictions of a given distribution network. The proposed algorithm is validated using a 33-bus testbed and the IEEE 123-bus feeder, and then compared with another state-of-the-art algorithm using the IEEE 37-bus feeder. [ABSTRACT FROM AUTHOR]

High congestion costs and new congestion patterns, formed by intermittent renewable generation, demand for more efficient utilization of the transmission system. Transmission switching (TS) and variable-impedance series FACTS devices are two technologies that provide such efficiency gains through controlling the power flows. As the system operators begin to utilize these tools, it is essential to understand the interdependence between them at various stages, such as planning and operation. This paper develops an optimal power flow framework that incorporates both FACTS and TS to study the link between the two power flow control technologies. The simulation results on an RTS 96-bus system suggest that: 1) substantial economic savings can be achieved through utilization of both TS and FACTS, beyond the independent capabilities of each technology; 2) performing TS actions affect the optimal location and set point of FACTS devices; and 3) operation of FACTS devices affect the location and frequency of TS actions. It is, thus, essential to acknowledge the interdependence between the two technologies both at the planning and operation stage. Failure to do so will lead to economic inefficiencies that can be avoided through co-optimization of generation dispatch, TS, and FACTS. [ABSTRACT FROM PUBLISHER]

This paper considers line switching as a remedial action to mitigate the geomagnetically induced currents (GICs) in large-scale power syste-kazerooni-2753840ms. The algorithm uses linear sensitivity analysis to find the best switching strategy which minimizes the GIC-saturated reactive power loss. Furthermore, the coupling between the ac power flow solution and the GIC flows is modeled and heuristic strategies are designed to maintain the system security measures in terms of both GICs and ac power flow. Finally, the computational complexity of the algorithm is analyzed for large-system implementations. To reduce the complexity, the critical lines are identified through the sensitivity analysis and the calculations are performed only on the reduced system. The effectiveness of the proposed algorithm is demonstrated through numerical results using a small 20-bus test case as well as large power systems. [ABSTRACT FROM PUBLISHER]

The resilience and reliability of modern power systems are threatened by increasingly severe weather events and cyber-physical security events. An effective restoration methodology is desired to optimally integrate emerging smart grid technologies and pave the way for developing self-healing smart grids. In this paper, a sequential service restoration (SSR) framework is proposed to generate restoration solutions for distribution systems and microgrids in the event of large-scale power outages. The restoration solution contains a sequence of control actions that properly coordinate switches, distributed generators, and switchable loads to form multiple isolated microgrids. The SSR can be applied for three-phase unbalanced distribution systems and microgrids and can adapt to various operation conditions. Mathematical models are introduced for three-phase unbalanced power flow, voltage regulators, transformers, and loads. The SSR problem is formulated as a mixed-integer linear programming model, and its effectiveness is evaluated via the modified IEEE 123 node test feeder. [ABSTRACT FROM PUBLISHER]

Voltage instability occurs when a power system is unable to meet the reactive power demand, and is typically corrected by switching on additional reactive power devices such as capacitor banks. Real-time monitoring and communication technologies can potentially improve voltage stability by enabling the rapid detection of low voltages and the implementation of corrective actions. These corrective actions, however, will only be effective in restoring stability if they are chosen in a timely, scalable manner. In this paper, we propose a submodular optimization approach for designing a control strategy that prevents voltage instability. Our key insight is that the voltage deviation from the desired level is a supermodular function of the set of reactive power injections that are employed, leading to computationally efficient control algorithms for stabilization with provable optimality guarantees. This submodular control framework is tested on the IEEE 300-bus transmission system. [ABSTRACT FROM PUBLISHER]

This paper describes a power system inertia estimation method that utilizes power perturbations caused by the flow switch on an HVDC interconnector. The analysis is performed using real power system measurements from Ireland's all-island power system. The method employs an energy based estimation technique which permits a non-step power change to be used for inertia calculation and encapsulates the challenges associated with the use of real data. While it is shown that synchronous generators account for most of the power system inertia, other contributors are also investigated, namely power station auxiliary load, distributed generation and power system demand. Time-of-day and wind related effects on Ireland's power system inertia are explored. Recommendations are made for the practical implementation of the method. [ABSTRACT FROM AUTHOR]

This paper tackles key industry needs in the scope of the AC Security-Constrained Optimal Power Flow (SCOPF) framework, specifically two major challenging requirements regarding generators’ post-contingency behavior: the (droop-based) frequency response and the voltage control mechanism (including PV/PQ switching). To this end, and to obtain a sufficiently accurate solution with a reasonable computational burden, we propose an approximation approach to SCOPF which extends significantly an existing algorithm with novel modelling elements: a continuous formulation to model generators’ post-contingency responses based on successive approximations, a technique to evaluate the viability of contingencies with respect to the base case set-points, and the complexity reduction of all post-contingency states through network compression and power flow piecewise linearization. All new features are validated both separately and in unison, to monitor the improvement of the solution time and the potential degradation of the solution's quality. The proposed approach is successfully applied to three power system network models, the largest of which consists of 2,000 buses and more than 3,000 contingencies. Finally, the trade-off between the limitations in terms of solution quality and the benefits in terms of computational effort are assessed for all proposed approximations. [ABSTRACT FROM AUTHOR]

Implementing automation system in distribution networks needs a huge investment that usually cannot be funded entirely in a short period of time. So distribution companies (DISCOs) should develop long-term plans to equip their network with automation technologies as far as economically justifiable. Aiming to provide a methodology for development such plans, this paper presents a novel multistage planning model for implementing distribution automation system considering all main hardware and software infrastructures. The proposed method optimally determines the type, location, and time in which an equipment or infrastructure must be added to network considering the network capacity expansion plan. The objective function of the planning problem is to maximize the net present value of the DISCO's profit in the planning time horizon. In this method, the optimization problem is solved using the genetic algorithm approach as a promising technique in solving the mixed integer nonlinear programming problems. The proposed method is evaluated on an illustrative test network and the obtained results are presented and discussed. [ABSTRACT FROM PUBLISHER]

In this paper, a flexible optimization-based framework for intentional islanding is presented. The decision is made of which transmission lines to switch in order to split the network while minimizing disruption, the amount of load shed, or grouping coherent generators. The approach uses a piecewise linear model of AC power flow, which allows the voltage and reactive power to be considered directly when designing the islands. Demonstrations on standard test networks show that solution of the problem provides islands that are balanced in real and reactive power, satisfy AC power flow laws, and have a healthy voltage profile. [ABSTRACT FROM PUBLISHER]

This paper introduces load shed recovery actions for transmission networks by presenting the dc optimal load shed recovery with transmission switching model (DCOLSR-TS). The model seeks to reduce the amount of load shed, which may result due to transmission line and/or generator contingencies, by modifying the bulk power system topology. Since solving DCOLSR-TS is computationally difficult, the current work also develops a heuristic (MIP-H), which improves the system topology while specifying the required sequence of switching operations. Experimental results on a list of N-1 and N-2 critical contingencies of the IEEE 118-bus test case demonstrate the advantages of utilizing MIP-H for both online load shed recovery and recurring contingency-response analysis. This is reinforced by the introduction of a parallelized version of the heuristic (Par-MIP-H), which solves the list of critical contingencies close to 5x faster than MIP-H with 8 cores and up to 14x faster with increased computational resources. The current work also tests MIP-H on a real-life, large-scale network in order to measure the computational performance of this tool on a real-world implementation. [ABSTRACT FROM AUTHOR]

This paper considers optimal transmission switching (OTS) to reduce generation cost by removing lines from service. A mixed integer program (MIP) has been proposed to solve the OTS problem, based on the linear direct current optimal power flow (DCOPF) model. Because of excessive computation times for large, real systems, the MIP model has been followed by some heuristics, also based on the DCOPF, to obtain near-optimal solutions quickly. However, the approximations in the DCOPF model may lead to poor choices of lines to remove from service. We assess the quality of line removal recommendations that rely on a previously published, DCOPF-based heuristic, by estimating actual cost reduction with the exact ACOPF model, using the IEEE 118-bus and 300-bus test systems with several demand levels. We also extend this heuristic to be based on the ACOPF and compare the quality of its recommendations to those of the DCOPF-based heuristic. The DCOPF-based heuristic performs very poorly in several cases, even leading to cost increases sometimes. There is a need for approximations to the ACOPF which are accurate enough to produce reliably good results for OTS heuristics, but fast enough for practical use. [ABSTRACT FROM AUTHOR]

Deploying shunt capacitor banks in distribution systems can effectively reduce the power loss and provide additional benefits for system operation. In practice, the power loss on distribution transformers can account for a considerable portion of the overall loss. This paper proposes a method for optimal placement of capacitor banks to the distribution transformers to reduce power loss. The capacitor bank locations are considered at the low-side of transformers. The net present value (NPV) criterion is adopted to evaluate the cost benefit of the capacitor installation project. First, an explicit formula for directly calculating the power loss of radial distribution systems is derived. Then, the optimal capacitor bank placement is formulated as a mixed-integer programming (MIP) model maximizing the NPV of the project subject to certain constraints. The model is suitable for being solved by commercial MIP packages, and the operational control of the capacitor banks to maximize the power loss reduction can be simply achieved by local automatic switching according to VAR measurements. The proposed method has been practically applied in the Macau distribution system, and the simulation results show that the proposed method is computationally efficient, and a considerable positive NPV can be obtained from the optimal capacitor bank placement. [ABSTRACT FROM PUBLISHER]

Event-triggered control (ETC) is becoming increasingly popular in load frequency control (LFC) operation in power systems. So far, the existing literature has primarily focused on load disturbance rejection in face of communication delay without considering much on networked-induced measurement disturbances and messages sent. In this paper, we study the LFC operation as a problem of networked control system and propose, for the first time, an ETC based switching approach for frequency regulation. We derive delay-dependent conditions to obtain the lower bound on inter-event time during event-trigger mechanism which assures the robust stability under networked induced time-varying delays and measurement disturbance and reduction in the amount of sent measurements. The effectiveness of the proposed approach is verified via numerical examples based on single-, two-area power systems and single-area with electric vehicle (EV) participation. [ABSTRACT FROM AUTHOR]

In this paper, we consider the problem of optimizing voltage set points and switching status of components in direct current power networks subject to physical and security constraints. The problem is cast as a mixed-integer nonlinear programming with two sources of computational complexity: i) Non-convex power flow equations, and ii) The presence of binary variables accounting for the on/off status of network components. A strengthened second-order cone programming (SOCP) relaxation is developed to tackle the non-convexity of power flow equations, and a branch-and-bound search is employed for determining optimal network configurations. The efficacy of the proposed method in optimizing the operation while mitigating contingencies is experimentally validated in a real-time hardware-in-the-loop environment using IEEE benchmark data. [ABSTRACT FROM AUTHOR]

Conventional droop control methods for power-sharing in a multi-terminal high voltage DC (MTDC) grid lead to voltage deviation from the nominal value. Moreover, the power-sharing is inaccurate in the droop-controlled MTDC system. This paper proposes a secondary controller with a distributed architecture to compensate the voltage deviation and to achieve equal power sharing automatically among the converter stations. A distributed observer is used to estimate the average voltage of the converter stations. The proposed distributed controller and observer use local measurements of output powers and voltages, and only communicate with neighboring stations. Therefore, the requirement of the global information in the centralized secondary control schemes is eliminated, which reduces the communication requirement and improves the reliability of the MTDC grid. The case studies illustrate that the proposed distributed controller regulates the stations’ average voltage and shares the power mismatch accurately. Impact of the communication time-delays and the control gain on stability of the MTDC grid are also investigated using the Lyapunov-KrasovskiiLMI condition. It is shown that reducing the control gain can stabilize the MTDC grid in the case of large communication time-delays. [ABSTRACT FROM AUTHOR]

The integration of volatile distributed energy resources (DERs) brings new challenges for the active distribution network maintenance scheduling (DN-MS). Conventionally, the DN-MS is formulated as a deterministic optimization model without considering the uncertainties of DERs. In this paper, the DN-MS is formulated as a multistage stochastic optimization problem, which is cast as a stochastic mixed-integer nonlinear programming model. It aims to reduce the total maintenance cost constrained by the reliability indices. To capture the operational characteristics of active distribution networks, the uncertainties of DERs and post-outage operation strategies of switching devices are incorporated into the model. In general, this type of model is intractable and mainly solved by heuristic search methods with low efficiency. Recently, Monte-Carlo tree search (MCTS) is emerging as a scalable and promising reinforcement learning approach. We propose a stochastic MCTS solution to this problem. In the tree search procedure, a sample average approximation technique is developed to estimate multistage maintenance costs considering uncertainties. To speed up the MCTS, the complicated constraints of the original problem are transformed to penalty or heuristics functions. This approach can asymptotically approximate the optimum with promising computation efficiency. Numerical test results demonstrate the superiority of the proposed method over benchmark methods. [ABSTRACT FROM AUTHOR]

Steady-state models of the hybrid power flow controller (HPFC) for power flow and optimal power flow (OPF) studies are presented in this paper, considering the multiple control modes of the device. A strategy for control mode switching and limit handling in power flow calculations is proposed. The OPF model of the HPFC represents all the device control and physical limits as constraints in the mathematical formulation, so that the HPFC can be optimally dispatched as a part of the transmission system control assets. The power flow model is demonstrated and validated through loadability studies on a two-area benchmark test system, where the OPF model is used to determine the optimal ratings of the device based on a cost-benefit analysis. A study is also presented of the HPFC application to Ontario-Canada's grid, to address particular congestion problems in this network; an HPFC cost analysis is also shown for this system. The presented studies demonstrate the application of the proposed models for planning and operation studies, illustrating the performance, effectiveness, and feasibility of the controller to solve congestion issues in a real grid. [ABSTRACT FROM AUTHOR]

DC-based optimal transmission switching (OTS) cannot consider ac feasibility, which hinders the exploitation of the benefits of OTS in power system operations. This paper proposes a new OTS approach that considers ac feasibility. The approach uses a two-level iterative framework in which a mixed integer second-order cone programming OTS model provides candidate solutions at the upper level, while the ac feasibility check is conducted at the lower level. An accelerating technique is developed to significantly improve the computational efficiency while maintaining accuracy. Case studies using the IEEE 57-bus system, the IEEE 118-bus system and a real-world large system demonstrate the efficacy of the proposed approach. [ABSTRACT FROM AUTHOR]

This paper describes a control method for distributed generation (DG) units to implement active power sharing and frequency recovery simultaneously in an islanded microgrid. Conventional active power–frequency (P –f) droop control is used for the DG controller, and the frequency deviation is recovered by the DG itself via self-frequency recovery control, without requiring secondary frequency control. Because the electrical distance (impedance) from each DG unit to a point where the load demand changes differs among DG units, the instantaneous frequency deviations may differ between DG units. These differences are fed into the integrators of the self-frequency recovery control and may result in errors in active power sharing. To solve this problem and share active power more accurately, a compensation control method is developed for active power sharing, which considers the droop coefficients of each of the DG units. Simulation results show that the proposed control method is effective. [ABSTRACT FROM AUTHOR]

This paper presents a new control method, in which a distributed generator (DG) actively participates in steady-state voltage control, together with an under-load tap changer (ULTC) and shunt capacitors (Sh.Cs). In the conventional DG control method, the integration of DGs into a distribution power system increases the number of switching operations of the ULTC and the Sh.Cs. To solve this problem, this paper proposes that the DG output voltage be dispatched cooperatively with the operation of the ULTC and the Sh.Cs, based on load forecasts for one day in advance. The objective of the proposed method is to decrease the number of switching device operations, as well as to reduce the power loss in the distribution lines, while maintaining the grid voltage within the allowed range. The proposed method is designed and implemented with Matlab, using two different dynamic programming algorithms for a dispatchable and a nondispatchable DG, respectively. Simulation studies demonstrate that the objective can be achieved under various grid conditions, determined by factors such as the DG output power characteristics, the location of the DG-connected bus on the feeder, and the load profile of the feeder containing the DG. [ABSTRACT FROM PUBLISHER]

There is currently a national push to create a smarter grid. Currently, the full control of transmission assets is not built in network optimization models. With more sophisticated modeling of transmission assets, it is possible to better utilize the current infrastructure to improve the social welfare. Co-optimizing the generation with the network topology has been shown to reduce the total dispatch cost. In this paper, we propose the concept of just-in-time transmission. This concept is predicated on the fact that transmission that is a detriment to network efficiency can be kept offline when not needed and, with the proper smart grid/advanced technology, can be switched back into service once there is a disturbance. We determine which lines to have offline based on the optimal transmission switching model previously proposed. A secondary topic of this paper focuses on flowgate bidding. Approved by the Federal Energy Regulatory Commission and implemented within the SPP and NYISO networks, flowgate bidding is defined as allowing a line's flow to exceed its rated capacity for a short period of time for a set penalty, i.e., price. We demonstrate the effectiveness of these models by testing them on large-scale ISO network models. [ABSTRACT FROM AUTHOR]

Topology control has garnered recent consideration for its value in leveraging the flexiblity of the power system. However, using even the latest technology, the AC optimal transmission switching (ACOTS) problem remains intractable. As such, most research addressing optimal topology control is based on the DCOPF, which has been shown to be particularly inaccurate for transmission switching decisions in the AC power system. This paper accelerates an existing mixed-integer linear power flow model which has been shown to be very accurate in approximating AC power flows. The aim of the new model is to identify transmission switching candidates to prevent load shed caused by contingency events. The methodology was tested on the IEEE 118-bus test case system and presents promising results. The model proposed herein was found to almost always identify AC optimal switching actions while significantly reducing the necessary solution time in comparison with the base model. [ABSTRACT FROM AUTHOR]

Identifying network dynamic topology changes with limited measurement data is a primary challenge for power distribution system analysis. Existing methods require the measurement of the nodal voltage (both amplitudes and phase angles) of a majority of nodes, which means that large-scale installation of advanced monitors is necessary. In this paper, a distribution network dynamic topology awareness method that only requires a synchronized voltage amplitude measurement of a limited number of nodes is proposed. The key idea of the design is to relate network topology changes (including line topology changes, node topology changes and switch actions) to the resultant perturbations in the voltage amplitude covariance matrix. Because perturbations can be identified with incomplete observations, the corresponding topology changes can be identified with limited measurements of voltage amplitude data. With no need for phase-angle measurement, only ordinary root mean square (RMS) based monitors are needed, which can be made available with a relatively minor investment. Simulation tests are performed with the IEEE 123-node system and 8500-node system. Remarkably, 80% of the topology changes can be detected with only 10% of the nodes equipped with monitors, and a 100% correct localization rate can be achieved with 50% of the nodes equipped with monitors. [ABSTRACT FROM AUTHOR]

An efficient wide-area measurement system (WAMS) should be able to preserve system observability in foreseen abnormal situations, such as intentional controlled islanding (ICI). In this paper, an optimal WAMS design model is proposed while ensuring power system observability in the base case and all plausible scenarios of ICI. Thus, quasi-observable states that are undesirable in state estimation are avoided. The model minimizes the cost of substation disruptions imposed by PMU installation and the cost of WAMS components subject to diverse economic and technical constraints. In order to optimally retain system observability in different operational configurations of substations, complex buses of switchgears with bus sectionalizers and couplers are modeled. Also, the indeterminacy of transformer tap ratios is considered to have realistic solutions. The proposed method is examined on IEEE standard test systems as well as Polish 2383-bus and 2746-bus large-scale systems to demonstrate its applicability to real systems. [ABSTRACT FROM AUTHOR]