Search

Droop control is a viable method for the operation of island DC microgrids in a decentralized architecture. This paper presents a mixed-integer conic optimization formulation for the design of generator droop control, comprising the parameters of a piecewise linear droop curve. The mixed-integer formulation originates from a stochastic optimization framework that considers several operating scenarios for finding the optimal design. The convexity of the mixed-integer problem continuous relaxation gives global optimality guarantees for the design problem. The paper presents computational results using a tight polyhedral approximation of the conic program, leading to a mixed-integer linear programming (MILP) problem that is solved using a state-of-the-art commercial solver. The results from the proposed approach are contrasted with both a classic linear droop control design and a recent piecewise linear formulation. The Monte-Carlo simulation results quantify the extent to which the MILP solution is superior in reducing voltage violations and power loss, and the degree to which the loss is close to that from a conic optimal power flow solution. [ABSTRACT FROM AUTHOR]

The increasing penetration of renewable energy, such as wind power, has brought great challenges to the power system operation due to its uncertainty. Flexibility, which measures the ability of power system to deal with the uncertainties, is critical for power system to adapt to the new era of renewable energy. The rising electrical demand of the water distribution system (WDS) creates opportunities for power system to leverage the flexibility provided by WDS. This paper investigates the water-energy relationship between these two systems and makes full use of the water pumps and tanks in the WDS to enhance the power system flexibility. Current WDS designs did not consider well the role WDS plays in the power system. This hinders the WDS from being fully used by power system to provide flexibility. An optimization model is proposed to determine the optimal tank size of WDS, which may provide the maximum available flexibility of power system. The effect of tank size on water quality is also investigated to ensure that the supplied water quality is not compromised. Moreover, a Benders-based heuristic algorithm is proposed to find the optimization solution more efficiently and to protect the data of each energy system. Results of case study highlight the merit of the proposed optimization design and the advantage of using WDS to provide flexibility for power system. [ABSTRACT FROM AUTHOR]

Case-by-case study in the literature has found from the results of numerical computation and simulation that a grid-connected virtual synchronous generator (VSG) can maintain the stability under the condition of extremely weak grid connection. This paper presents the theoretical proof to the finding and thus, generally concludes that the grid-connected VSG is immune to the instability risk under the condition of weak grid connection. In addition, the paper extends the theoretical proof to the case of a grid-connected PMSG wind farm with multiple VSGs. An example grid-connected PMSG wind farm with twenty VSGs is presented to demonstrate and evaluate the theoretical analysis and conclusion made in the paper. [ABSTRACT FROM AUTHOR]

Due to the development of cyber-physical systems for modernizing power grids, vulnerability assessment has become an emerging focus in power system security studies. With the increasing deployment of cyber-enabled technologies in power systems, modern power system is prevalently exposed to a wide gamut of cybersecurity threats. Thus, there is an urgent need to develop effective cyber risk management mechanisms to mitigate the growing cyberthreats. Recently cyber insurance is emerging as a promising financial instrument for cyber risk management of critical infrastructures such as power grids. In this paper, a new cyber-insurance design framework is proposed to hedge against the risk of massive monetary losses due to potential cyberthreats. Traditionally, insurance companies serve as third-party risk-bearers offering aggregate design of the insurance policy which may stipulate high premiums. However, unusual loss patterns may still lead to excess financial risk for insurance companies. In this paper, coalitional insurance is introduced as a promising alternative or supplement to the traditional insurance plans provided by insurance companies. Under the proposed cyber-insurance model, several transmission operators form an insurance coalition, where the coalitional premiums are derived considering system vulnerabilities and loss distributions. The indemnity which covers the loss of TOs complies with the budget sufficiency. Overall, this study proposes a novel coalitional platform based cyber-insurance design that estimates the insurance premiums via cybersecurity modeling and reliability implication analysis. [ABSTRACT FROM AUTHOR]

This paper presents a distributionally robust network-constrained unit commitment (DR-NCUC) model considering AC network modeling and uncertainties of demands and renewable productions. The proposed model characterizes uncertain parameters using a data-driven ambiguity set constructed by training samples. The non-convex AC power flow equations are approximated by convex quadratic and McCormick relaxations. Since the proposed min-max-min DR-NCUC problem cannot be solved directly by available solvers, a new decomposition algorithm with proof of convergence is reported in this paper. The master problem of this algorithm is solved using both primal and dual cuts, while the max-min sub-problem is solved using the primal-dual hybrid gradient method, obviating the need for using duality theory. Also, an active set strategy is proposed to enhance the tractability of the decomposition algorithm by ignoring the subset of inactive constraints. The proposed model is applied to a 6-bus test system and the IEEE 118-bus test system under different conditions. These case studies illustrate the performance of the proposed DR-NCUC model to characterize uncertainties and the superiority of the proposed decomposition algorithm over other decomposition approaches using either primal or dual cuts. [ABSTRACT FROM AUTHOR]

Co-simulation of heterogeneous systems allows for in-depth analysis of various aspects of power systems’ operation while staying within the environments of the simulation tools that are best fit to represent their respective domains. Equipped with a proprietary co-simulation platform, the paper focuses on the issue of power-conjugate coupling between parts of power grids modeled in transient stability and electromagnetic transient simulation tools. The problems of co-simulation stability and precision in presence of delays are tackled by means of designing a proper coupling interface. It is shown that two established interface methods – the V-I method and the Transmission Line Interface – are special cases of a generalized interface framework proposed in the paper. Moreover, a new interface algorithm is described by parametrizing the generalized framework. Analytical tools are also formulated to aid in the analysis of interface stability and precision via the concepts of passivity and transparency. Simulation results of benchmark systems of various complexity demonstrate the application of the developed power coupling interface. [ABSTRACT FROM AUTHOR]

Load forecasting is one of the most important and studied topics in modern power systems. Most of the existing research on day-ahead load forecasting try to build a good model to improve the forecasting accuracy. The forecasted load is then used as the input to generation scheduling with the ultimate goal of minimizing the cost of generation schedules. However, existing day-ahead load forecasting models do not consider this ultimate goal at the training/forecasting stage. This paper proposes a task-based day-ahead load forecasting model labeled as LfEdNet that combines two individual layers in one model, including a load forecasting layer based on deep neural network (Lf layer) and a day-ahead stochastic economic dispatch (SED) layer (Ed layer). The training of LfEdNet aims to minimize the cost of the day-ahead SED in the Ed layer by updating the parameters of the Lf layer. Sequential quadratic programming (SQP) is used to solve the day-ahead SED in the Ed layer. The test results demonstrate that the forecasted results produced by LfEdNet can lead to lower cost of day-ahead SED at the expense of slight reduction in forecasting accuracy. [ABSTRACT FROM AUTHOR]

Aging asset management requires careful consideration of end-of-life of any asset. This is particularly serious with aging infrastructure which may require complete replacement of a large asset which has a long lead time. In many current End-of-Life analysis approaches to calculate unavailability, the period of interest is sub-divided into yearly cycles with the assumption that the asset is available at the start of the year. Although this assumption is adequate if the replacement time for the asset occurs within the year, with longer lead times this can create excessively optimistic availabilities. This paper presents an improved probabilistic tool for risk assessment due to End-of-Life failure unavailability which overcomes this deficiency. The End-of-Life methodology proposed in this paper is required when aging assets have long lead times to replacement and so the capital investment decision must be made several years ahead. The method is applied to evaluate the End-of-Life unavailability of Manitoba Hydro Bipole II HVdc converters. The results are corroborated using Monte Carlo simulation. Finally, the risk of End-of-Life is incorporated into an economic cost-benefit analysis corresponding to the presented unavailability evaluation method. [ABSTRACT FROM AUTHOR]

This paper presents some results on the accuracy of normal form analysis for large deviations from the stable equilibrium point (SEP) in a power system. The results of studies on the region of convergence of Neumann series, which is required for normal form analysis, are presented. A polynomial function approximation is proposed to model the generator exciter limiter. Studies on the accuracy of higher order normal form analysis for large deviations from SEP are presented. Use of Prony analysis in addition to simulation is proposed for the verification of accuracy. [ABSTRACT FROM AUTHOR]

Urban power grids are facing many operational and expansion challenges to meet further demand growth and increased reliability requirements. Advanced transmission technologies have been considered by the electric utilities to effectively increase the utilization of existing infrastructure and operational flexibility. The focus of this paper is on VSC-HVDC technologies for urban power grid enhancement and modernization. First, a potential technical scheme is proposed for converting an existing AC circuit to DC operation, which could boost the power transfer capability of the critical transmission corridor and increase network operational flexibility. Second, this paper proposes three operation modes for the VSC-HVDC interties in urban power grids corresponding to normal, emergency and island operating conditions, respectively. An integrated, adaptive emergency control strategy (AEC) is proposed that can enable adaptive power flow responses of the VSC-HVDC intertie under varying system operating conditions and critical contingencies. The flexibility and effectiveness of the proposed operational principles of urban VSC-HVDC intertie and the corresponding control strategies are verified in PSCAD/EMTDC using a realistic urban power grid in China. [ABSTRACT FROM AUTHOR]

This paper proposes a systematic and general approach to model correlated stochastic processes in power systems by means of stochastic differential-algebraic equations. The paper discusses the theoretical background of stochastic differential-algebraic equations and provides a variety of examples of correlated stochastic models for power system applications. With this aim, stochastic processes with Normal and Weibull distributions are considered. The case study utilizes the well-known two-area system to demonstrate that the presence of correlation between the stochastic processes can cause instability, despite the fact that the same system is stable if the same processes are uncorrelated. The case study also considers a 1479-bus dynamic model of the all-island Irish transmission system to show the scalability of the proposed technique, and to compare scenarios with different levels of correlation among stochastic processes. Results indicate that correlation has a non-negligible impact on short-term dynamics. A high level of correlation among the processes, in fact, can give raise to instability. [ABSTRACT FROM AUTHOR]

Thermostatically controlled loads (TCLs) are regarded as one of the promising resources for suppressing power fluctuations due to renewable energy (RENs). However, due to the great burdens of fully considering each users’ characteristics, it is difficult to achieve unity of the individual optimal decisions and global optimum in demand-side management (DSM). This paper proposes a game-theoretic DSM that can optimize the global power consumption schedule by individual TCL user's optimization. By integrating the prediction of REN outputs into the pricing mechanism, the proposed DSM can guide the users to make their best power consumption schedules along with intermittent REN generations, thus to smooth the tie-line power of microgrids. In this paper, a novel pricing mechanism is firstly developed based on the concave N-person game theory, which is more adaptive and flexible compared with existing game-theoretic DSM. Then, an individual's power consumption optimization and its simplified model are developed considering the constraints of the TCL model and personal preferences. The simplified model can be easily solved and achieve a fast solution in the power consumption game. An implementation framework of the proposed DSM is further developed for practical application. Finally, numerical studies verify the effectiveness of the proposed models and methods. [ABSTRACT FROM AUTHOR]

This paper demonstrates that false data injection (FDI) attacks are extremely limited in their ability to cause physical consequences on $N-1$ reliable power systems operating with real-time contingency analysis (RTCA) and security constrained economic dispatch (SCED). Prior work has shown that FDI attacks can be designed via an attacker-defender bi-level linear program (ADBLP) to cause physical overflows after re-dispatch using DCOPF. In this paper, it is shown that attacks designed using DCOPF fail to cause overflows on $N-1$ reliable systems because the system response modeled is inaccurate. An ADBLP that accurately models the system response is proposed to find the worst-case physical consequences, thereby modeling a strong attacker with system level knowledge. Simulation results on the synthetic Texas system with 2000 buses show that even with the new enhanced attacks, for systems operated conservatively due to $N-1$ constraints, the designed attacks only lead to post-contingency overflows. Moreover, the attacker must control a large portion of measurements and physically create a contingency in the system to cause consequences. Therefore, it is conceivable but requires an extremely sophisticated attacker to cause physical consequences on $N-1$ reliable power systems operated with RTCA and SCED. [ABSTRACT FROM AUTHOR]

Pricing multi-interval economic dispatch of electric power under operational uncertainty is considered in this two-part paper. Part I investigates dispatch-following incentives of profit-maximizing generators and shows that, under mild conditions, no uniform-pricing scheme for the rolling-window economic dispatch provides dispatch-following incentives that avoid discriminative out-of-the-market uplifts. A nonuniform pricing mechanism, referred to as the temporal locational marginal pricing (TLMP), is proposed. As an extension of the standard locational marginal pricing (LMP), TLMP takes into account both generation and ramping-induced opportunity costs. It eliminates the need for the out-of-the-market uplifts and guarantees full dispatch-following incentives regardless of the accuracy of the demand forecasts used in the dispatch. It is also shown that, under TLMP, a price-taking market participant has incentives to bid truthfully with its marginal cost of generation. Part II of the paper extends the theoretical results developed in Part I to more general network settings. It investigates a broader set of performance measures, including the incentives of the truthful revelation of ramping limits, revenue adequacy of the operator, consumer payments, generator profits, and price volatility under the rolling-window dispatch model with demand forecast errors. [ABSTRACT FROM AUTHOR]

This paper presents a new non-deterministic approach for multiyear distribution network reinforcement planning (DNRP) considering the uncertainty sources pertaining to loads, electricity prices, investment costs, and operation costs. Accordingly, the underlying idea of the information-gap decision theory (IGDT) is used to obtain a robust solution protected against different realizations of each uncertain variable lying in its robust region. The proposed model is capable of adjusting the robustness of the optimal solution in terms of a specific parameter designated as the budget of uncertainty. As the uncertain loads, investment and operation costs competitively tend to maximize their robust regions for a particular value of the budget of uncertainty, the normalized normal constraint (NNC) method as a proficient multi-objective optimization method is exploited in this paper to solve the proposed multiobjective IGDT-based DNRP (IGDT-DNRP) model. Mainly, the NNC method presents a set of Pareto optimal solutions rather than a single optimal solution. Accordingly, a posteriori out-of-sample analysis is introduced in this paper to find the best solution among the set of Pareto optimal solutions. The proposed IGDT-DNRP model is implemented on the IEEE 33-bus distribution network under different circumstances. Simulation results illustrate the effectiveness of the proposed nondeterministic approach. [ABSTRACT FROM AUTHOR]

Extending traditional deterministic economic dispatch to incorporate significant stochastic wind power is an important but challenging task in today's power system decision making. In this paper, this issue is formulated as a chance-constrained economic dispatch (CCED) problem. Usually, in the presence of non-Gaussian correlated random variables, both the objective function and constraints are difficult to handle. To address this issue, this paper provides a novel method dealing with non-Gaussian random variables. First, the Gaussian mixture model is adopted to represent the joint probability density function of power output for multiple wind farms. Then, analytical formulae are derived that can be used for fast computation of partial derivatives of the objective function and transformation of chance constraints into linear ones. Thereafter, the CCED can be solved as a deterministic linear convex optimization with a global optimal solution. The effectiveness and efficiency of the proposed methodology are validated via a case study with a modified IEEE 39-bus system. [ABSTRACT FROM PUBLISHER]

A semi-analytical formulation is presented in this paper for the probability computation of branch current in multiphase systems. The developed formula is derived based on the linear power flow model in rectangular coordinates. The system uncertainty injections can be renewable energy resources or loads and are modeled using a Gaussian mixture model (GMM). The developed formula can be used to compute the line current violation probability as well as integrate into optimal power flow problem as chance-constraint relaxation. The proposed formula is first compared with the Matlab embedded numerical integration function to show its performance. Besides, the semi-analytical formula is validated and compared with the Monte Carlo simulation method using the IEEE 123-bus system, EPRI Ckt5, and Ckt7 systems. [ABSTRACT FROM AUTHOR]

Service restoration is one of the critical functions to enable the future self-healing distribution system. To restore the distribution system in a timely and reliable manner, the realistic system operating conditions need to be accurately characterized. In this paper, two main factors that have great impacts on distribution system restoration (DSR) in practice are investigated. First, cold load pickup (CLPU), generally caused by thermostatically controlled loads (TCLs), is a common phenomenon after an outage and shaped by the outage duration. However, the time-dependent behaviors of CLPU are rarely considered in literature. In this paper, the operating state evolution of TCLs after an outage is analyzed to characterize time-dependent CLPU. And the time-dependent CLPU is analytically embedded in DSR to accurately represent the actual behaviors of the restored loads. Second, it is difficult to predict loads that fluctuate during DSR due to the lack of real-time measurement data. Accordingly, a robust DSR based on the information gap decision theory (IGDT) is proposed to address this challenge, fully considering the uncertainty of CLPU. The proposed models are tested in IEEE 13-node and 123-node test feeders. Simulation results demonstrate that the time-dependent CLPU model and the uncertainty modeling of CLPU can accurately capture the actual behaviors of loads with TCLs after an outage, which greatly improves DSR decisions in practice. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive scheduling framework for residential demand response (DR) programs considering both the day-ahead and real-time electricity markets. In the first stage, residential customers determine the operating status of their responsive devices such as heating, ventilation, and air conditioning (HVAC) systems and electric water heaters (EWHs), while the distribution system operator (DSO) computes the amount of electricity to be purchased in the day-ahead electricity market. In the second stage, the DSO purchases insufficient (or sells surplus) electricity in the real-time electricity market to maintain the supply-demand balance. Due to its computational complexity and data privacy issues, the proposed model cannot be directly solved in a centralized manner, especially with a large number of uncertain scenarios. Therefore, this paper proposes a combination of stochastic programming (SP) and the alternating direction method of multipliers (ADMM) algorithm, called SP-ADMM, to decompose the original model and then solve each sub-problem in a distributed manner while considering multiple uncertain scenarios. The simulation study is performed on the IEEE 33-bus system including 121 residential houses. The results demonstrate the effectiveness of the proposed approach for large-scale residential DR applications under weather and consumer uncertainties. [ABSTRACT FROM AUTHOR]

This paper studies the characteristics of subsynchronous oscillation (SSO) power propagation in power systems with a large-scale wind farm integration. Based on the instantaneous power theory, a novel definition of SSO power is proposed to characterize its propagation. The SSO power contains both DC power components and AC power components. Utilizing SSO power, SSO propagation is quantitatively studied in single oscillation source systems, and further studied in multiple oscillation sources systems. Theoretical analysis reveals that in addition to the recognized impact of line impedance, power flow also affects SSO power propagation significantly. Hence, propagation impact factor is proposed for the determination of the dominant influencing element. To reveal SSO power propagation paths in a network, shunt coefficients of DC power components and AC power components are expressed respectively. Test cases under different operating conditions and a practical case are carried out to demonstrate analysis and conclusions in this paper. [ABSTRACT FROM AUTHOR]

The wide implementation of information and communication technologies (ICT) cause power system operations exposed to cyber-attacks. Meanwhile, the tendency of integrated multi energy vectors has worsened this issue with multiple energy coupled. This paper proposes a two-stage risk-averse mitigation strategy for water-energy systems (WESs), incorporating power, natural gas and water systems against false data injection attacks (FDIA) under water-energy nexus. The FDIA on individual sub-systems is modelled through hampering false data integrity to the systems. An innovative two-stage risk-averse distributionally robust optimization (RA-DRO) is proposed to mitigate uneconomic operation and provides a coordinated optimal load shedding scheme for the nexus system security. A coherent risk measure, Conditional Value-at-Risk is incorporated into the RA-DRO to model risk. A Benders decomposition method is used to solve the original NP-hard RA-DRO problem. Case studies are demonstrated on a WES under water-energy nexus and results show that the effectiveness of the method to mitigate risks from potential FDIA and renewable uncertainties. This research provides WES operators an economic system operation tool by optimally coordinating energy infrastructures and implementing reasonable load shedding to enhance cybersecurity. [ABSTRACT FROM AUTHOR]

As power systems are undergoing a significant transformation with more uncertainties, less inertia and closer to operation limits, there is increasing risk of large outages. Thus, there is an imperative need to enhance grid emergency control to maintain system reliability and security. Towards this end, great progress has been made in developing deep reinforcement learning (DRL) based grid control solutions in recent years. However, existing DRL-based solutions have two main limitations: 1) they cannot handle well with a wide range of grid operation conditions, system parameters, and contingencies; 2) they generally lack the ability to fast adapt to new grid operation conditions, system parameters, and contingencies, limiting their applicability for real-world applications. In this paper, we mitigate these limitations by developing a novel deep meta-reinforcement learning (DMRL) algorithm. The DMRL combines the meta strategy optimization together with DRL, and trains policies modulated by a latent space that can quickly adapt to new scenarios. We test the developed DMRL algorithm on the IEEE 300-bus system. We demonstrate fast adaptation of the meta-trained DRL polices with latent variables to new operating conditions and scenarios using the proposed method, which achieves superior performance compared to the state-of-the-art DRL and model predictive control (MPC) methods. [ABSTRACT FROM AUTHOR]

This paper proposes a semi-analytical method to obtain the equilibrium bidding strategies for generation and demand units in a combined oligopoly and oligopsony wholesale electricity market. Such market structure is the outcome of the increasing deployment of demand response programs that facilitate active participation of demand-side players in the price-setting process. In this analysis, the concept of supply function equilibrium (SFE) is used to investigate the oligopolistic competition among generation units. The SFE model is extended and the demand function equilibrium (DFE) is obtained to study the oligopsonistic competition among demand units. The economic behavior of a market participant is formulated as a bi-level programming (BLP) problem. The imperfect competition among generation units, as well as among demand units, are modeled as a non-cooperative game. Next, a direct method is developed to calculate all candidate equilibriums of the market, and the locational marginal prices (LMPs) in terms of the bidding strategies of the market participants. The BLP problem is solved by obtaining the coordinated Pareto-dominant Nash equilibrium of the market participants’ non-cooperative games. Finally, the proposed analysis is examined in case studies. Accordingly, we report insightful observations with respect to the impact of the changes in the new market structure, at firm-level and market-level, such as in terms of mitigating market power of generation units, the market clearing prices and quantities, surplus for generation units and demand units, and potential impact on market efficiency. [ABSTRACT FROM AUTHOR]

Ensuring long-term voltage stability is critical for reliable operations of power grids. High share of distributed energy resources (DERs) can create complicated system operation modes that may invalidate the traditional long-term voltage stability analysis based on typical operation modes. To address this challenge, this paper investigates how to compute the shortest path to the voltage stability boundary in the DER aggregated load space with large dispersion. Instead of working in the Euclidean space, we establish the analysis and computations on the algebraic power flow manifold to better capture the curvature change of the shortest path along the direction of losing stability. A modified optimal control framework is presented for obtaining the ground-truth of the smooth shortest path on the manifold. To efficiently and accurately solve for the shortest path, we further leverage the geometric features of the power flow manifold and propose a tri-sectional approximation model that is scalable for large-scale systems. Several numerical examples, up to the 1354-bus system, with different DER penetration levels and high dimensional renewable power injection variations are evaluated. The simulation results demonstrate that the tri-sectional approximation achieves high accuracy and efficiency to approximate the shortest path to the voltage stability boundary. [ABSTRACT FROM AUTHOR]

This paper presents a computation-efficient stochastic dynamic programming algorithm for solving energy storage price arbitrage considering variable charge and discharge efficiencies. We formulate the price arbitrage problem using stochastic dynamic programming and model real-time prices as a Markov process. Then we propose an analytical solution algorithm using a piecewise linear approximation of the value-to-go function. Our solution algorithm achieves extreme computation performance and solves the proposed arbitrage problem for one operating day in less than one second on a personal computer. We demonstrate our approach using historical price data from four price zones in New York Independent System Operator, with case studies comparing the performance of different stochastic models and storage settings. Our results show that the proposed method captures 50% to 90% of arbitrage profit compared to perfect price forecasts. In particular, our method captures more than 80% of arbitrage profit in three out of the four price zones when considering batteries with more than two-hour duration and realistic degradation cost. [ABSTRACT FROM AUTHOR]

In many power systems, the increased penetration of inverter-based renewable generation will cause a decrease in kinetic energy storage, leading to higher frequency excursions after a power disturbance. This is the case of the future Nordic Power System (NPS). The look-ahead study reported in this paper shows that the chosen units participating in Frequency Containment Reserves (FCR) cannot keep the frequency above the prescribed threshold following the outage of the largest plant. This analysis relies on a detailed model of the Northern European grid. The latter is compared to the classical single-mass equivalent, and the impact of voltage-dependent loads is assessed in some detail. Next, the paper focuses on emergency power control of the HVDC links that connect the NPS to the rest of the European grid, which can supplement or even replace part of the FCR. The proper tuning of that control is discussed. Finally, the analysis is extended to the HVDC links connecting the future North Sea Wind Power Hub under two configurations, namely low and zero inertia. The impact of outages in the latter sub-system is also assessed. The material to simulate the system with industrial software is made publicly available. [ABSTRACT FROM AUTHOR]

The high penetration of renewables has sparked new oscillatory concerns in hybrid AC/DC grids. Knowledge of the oscillation regarding its source and propagation mechanism, is crucial to system operation. In this respect, the frequency-domain modal analysis (FMA) provides a way (e.g., participation factor) to extract these oscillation properties, and has been widely applied in converter-based AC grids. Compared to AC grids, oscillation properties of hybrid AC/DC grids are much more complex. Such complexity mainly originates from the diversity of oscillation propagation behaviors in hybrid AC/DC grids, where a distinctive local-area oscillation will emerge. Therefore, a dedicated oscillation propagation analysis for hybrid AC/DC grids is desired, which is the main focus of this paper. First, the mechanism of the distinctive local-area oscillation is analyzed considering AC/DC coupled dynamics of converters. Then, a systematic method for the oscillation propagation analysis is presented, where indices for characterizing the local-area oscillation and its impact area are established. Finally, some propagation properties are discussed, by which a strategy for the online oscillation source locating is designed. Case studies are carried out in a typical hybrid AC/DC grid to validate the propagation analysis in this paper. [ABSTRACT FROM AUTHOR]

Online transient analysis plays an increasingly important role in dynamic power grids as the renewable generation continues growing. Traditional numerical methods for transient analysis not only are computationally intensive but also require precise contingency information as input, and therefore, are not suitable for online applications. Existing online transient assessment studies focus on the determination of post-contingency system stability or stability margin. This paper develops a novel graph-learning framework, Deep-learning Neural Representation or DNR, for online prediction, of the time-series trajectories of the system states using initial system responses that can be measured by phasor measurement units (PMUs). The proposed DNR framework consists of two sequential modules: a Network Constructor that captures network dependencies among generators, and a Dynamics Predictor that predicts the system trajectories. The key to improved prediction performance is the introduction of the spatio-temporal message-passing operations into graph neural networks with structural knowledge. Its effectiveness and scalability are validated through comparative studies, demonstrating the prediction performance under different contingency scenarios for systems of different sizes. This framework provides a solution to online predicting post-fault system dynamics based on real-time PMU measurements. Additionally, it can also be applied to facilitate the offline transient simulation without simulating the entire trajectories. [ABSTRACT FROM AUTHOR]

Unified power flow controller (UPFC) gains growing application in power systems due to its power flow regulation ability. However, there is still a dilemma in the incorporation of UPFC into security-constrained economic dispatch (SCED). The modeling of UPFC involves nonlinear and nonconvex operational constraints, which is difficult to solve efficiently and accurately. Conventional methods adopted Taylor expansion or sensitivity analysis to realize the convexification of UPFC models, which leads to a loop structure and is subject to initial point choice. In this paper, a novel three-terminal injected UPFC model is proposed. In the proposed model, the voltage source variables are eliminated completely. Instead, only power injection variables are introduced to equivalently describe physical characteristics and constraints of UPFC. The nonlinear and nonconvex operational constraints of UPFC are transformed into mixed integer second-order cone form. Moreover, compared with conventional UPFC models, the control characteristic of UPFC is considered in a more accurate and practical manner in the proposed SCED, which helps to prevent potential risks of power flow over-limit under N-1 contingencies. Simulation results show the effectiveness and efficiency of the established solution. [ABSTRACT FROM AUTHOR]

In a wind farm, the interactions between turbines caused by wakes can significantly reduce the power output of the wind farm. Cooperative control among the turbines has the potential to improve the power output. However, existing centralized power optimization methods are computationally expensive and does not scale well for large wind farms, limiting their practical use in real-time control for time-varying wind conditions and turbine configuration (with adding or maintaining of turbines). To address this problem, this paper proposes a fully distributed power optimization method for wind farms using alternating direction method of multipliers (ADMM). The proposed method allows the wind farm power output to be optimized in fully distributed manner with turbine-to-turbine message passing over a mesh network, guarantees the implemented control actions satisfy the control constraints of all turbines, and provably converges to a stationary point of the wind farm power optimization problem. Simulation results demonstrate that the proposed method can significantly reduce the computation time with hardly sacrificing the power gain compared with centralized method and thus is computationally efficient for real-time power optimization of large wind farms. [ABSTRACT FROM AUTHOR]

Due to the diversity of power consumption patterns, the false positive rate (FPR) of data-driven electricity theft detection (ETD) methods is too high to meet practical needs, which severely restricts the engineering application of data-based methods. To reduce FPR of ETD methods based on advanced metering infrastructure (AMI), a deep neural network with low FPR (LFPR-DNN) is proposed in this paper. First, a deep model is constructed based on one-dimensional convolution and residual network, which can automatically extract features from consumption data. Then, a two-stage training scheme is used to train the network. In the first stage, the conventional gradient descent algorithm is used to update the network weights. To minimize the impact of data imbalance on detection performance, focal loss is used. Besides, grid search is used to optimize the hyper-parameters of the model. In the second stage, with FPR as the optimization objective, the particle swarm optimization (PSO) algorithm is used to train the network. Finally, the proposed LFPR-DNN is verified by using the open Irish data set. Compared to other state-of-the-art classifiers, LFPR-DNN has the lowest FPR with 0.29% and the highest AUC with 99.42%. The FPR is reduced by an order of magnitude, which verifies the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Achieving the low-carbon transition of power systems requires the coordination of renewable energy generation and other emerging electricity technologies. Their technical indicators are changing rapidly since these technologies are in the initial stages of development. Determining the technical and policy targets for achieving the low-carbon transition is critical for regulators and power system planners. This paper defines this problem as a backcasting problem, whose concept is derived from environmental science research. We introduce it into the power system planning field and innovatively model it as a bi-level optimization problem. According to the characteristics of the backcasting problem, an improved barrier method is proposed to solve it efficiently. The effectiveness of the proposed model and algorithm are verified through case studies on a modified Garver’s 6-bus system and a realistic Northwest China power system, and they are compared with state-of-the-art solution techniques. The results of the backcasting problem provide a new perspective on the economic impacts of the low-carbon transition and are helpful in energy policy formulation for power systems. [ABSTRACT FROM AUTHOR]

This paper proposes a hybrid data-driven method for fast solutions of preventive security-constrained optimal power flow (SCOPF) of power systems. The proposed method formulates the SCOPF problem as constraints-satisfying training of a deep reinforcement learning (DRL) agent, where the action-value function of DRL is augmented by contingency security constraints. In the training process, the proposed method hybridizes the primal-dual deep deterministic policy gradient (PD-DDPG) and the classic SCOPF model. Instead of building reward critic networks and cost critic networks via interacting with the environment (i.e., power flow equations), the actor gradients are approximated by solving KKT conditions of the Lagrangian. Finally, with the formulated sparse Jacobians of constraints and sparse Hessians of Lagrangians, the interior point method is incorporated in PD-DDPG to derive the parameters updating rule of the DRL agent. Numerical tests are carried out on a modified IEEE 57-bus system and a modified IEEE 300-bus system for critical contingencies. The results show that the well-trained DRL agent can rapidly (real-time) obtain high-quality SCOPF solutions that satisfy the security constraints. [ABSTRACT FROM AUTHOR]

This paper proposes a novel repair rule set (RRS) for scheduling the power system infrastructure repair after the occurrence of extreme events. RRS is made up of multiple repair rules, each of them can be applied in arbitrary post-disaster failure scenarios to rank the repair actions by priority. A learning-to-rank technique called AdaRank is used to train the repair rules by combining the weak learners derived from the dynamic repair scheduling model. Then, RRS is constructed by iteratively clustering the training cases and retraining the repair rule for each cluster. Increasing the number of repair rules within RRS allows it to differentiate various types of failure scenarios, thereby improving its performance. Further combined with multi-label K nearest neighbor (ML-KNN) technique, RRS is able to schedule the repair without the full knowledge of real-time failure information, such as the estimated repair time. The results of case studies on IEEE-118 test systems show that the proposed method has a desirable performance compared to the exact mathematical optimization model. Moreover, it reduces the requirement for failure information while significantly improving the computational efficiency. [ABSTRACT FROM AUTHOR]

This paper investigates the effects of the dynamic properties of a photovoltaic generator (PVG) on the stability of a grid-connected current-source inverter (CSI)-based photovoltaic system and presents a simple yet effective active compensator to ensure system stability. A detailed equivalent model of the PVG that considers the dynamic resistance, diffusion capacitance, series inductance, and dc cable resistance and inductance is used, and the effects of these parameters are assessed. It has been found that when the PVG operates in the constant-current region (CCR), the phase margin becomes negative in the control-to-input dynamics, which alters the stability of the dc-link current control. The change in the system dynamics when the operating point of the PVG shifts from the constant-voltage region (CVR) to CCR is verified through a detailed small-signal state-space model of the complete system. Furthermore, an active compensator is proposed to ensure stable dc-link current control operation at all operating points of the PVG. The influence of different control parameters on the integrated system dynamics is examined to determine the range of the control parameters required for stable operation. The performance of the proposed system under utility-grid fault, grid voltage parameter variation, weak grid, and changes in insolation level is also evaluated. Detailed nonlinear time-domain simulation results, using a typical utility-scale CSI-based PV system, validate the analytical results and the effectiveness of the proposed active stabilization under different operating conditions. [ABSTRACT FROM AUTHOR]

The loss of small signal stability under parameter variation (e.g., fluctuation of loads and wind powers) can be ascribed to local bifurcations, i.e., saddle-node, Hopf, singularity-induced, and limit-induced bifurcations. Classic bifurcation calculation methods like the direct method and continuation method can only provide a bifurcation point or two-parameter bifurcation curve. Based on Galerkin method and the implicit function theorem, this paper proposes accurate polynomial approximations of bifurcation hypersurfaces in the multi-dimensional parameter space of interest. The proposed method can ensure high accuracy in this parameter space, and thus is preferable to the existing Taylor expansion-based local approximation method, given the intrinsic large-variation characteristic of wind powers. Acquired bifurcation hypersurfaces are immediately used to construct the small signal stability region of the continuous system, and then compute the stability margin for the operating point subjected to uncertainty of wind generation. Besides, the validity scope of the proposed method is analyzed, and the handling of limit-triggered equation switching as well as its computational difficulty is discussed. Computational results on the two-parameter 11-bus two-area and six-parameter IEEE 145-bus test systems validate the high accuracy and effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Severe geomagnetic disturbances (GMDs) increase the magnitude of the electric field on the Earth’s surface (E-field) and drive geomagnetically-induced currents (GICs) along the transmission lines in electric grids. These additional currents can pose severe risks, such as current distortions, transformer saturation and increased reactive power losses, each of which can lead to system unreliability. Several mitigation actions (e.g., changing grid topology) exist that can reduce the harmful GIC effects on the grids. Making such decisions can be challenging, however, because the magnitude and direction of the E-field are uncertain and non-stationary. In this paper, we model uncertain E-fields using the distributionally robust optimization (DRO) approach that determines optimal transmission grid operations such that the worst-case expectation of the system cost is minimized. We also capture the effect of GICs on the nonlinear AC power flow equations. For solution approaches, we develop an accelerated column-and-constraint generation (CCG) algorithm by exploiting a special structure of the support set of uncertain parameters representing the E-field. Extensive numerical experiments based on “epri-21” and “uiuc-150” systems, designed for GMD studies, demonstrate (i) the computational performance of the accelerated CCG algorithm, (ii) the superior performance of distributionally robust grid operations that satisfy nonlinear, nonconvex AC power flow equations and GIC constraints, in comparison with standard stochastic programming-based methods during the out-of-sample testing. [ABSTRACT FROM AUTHOR]

High renewable energy penetration increases the electricity seasonal imbalance in the long-term timescale. Power system planning needs to consider the optimal configuration of various flexibility resources and electricity balance in different timescales. The coupling of multiple timescales largely increases the computation complexity of the power system planning problem. Thus, this paper presents an efficient source-grid-storage co-planning model which incorporates a year-round hourly operation simulation. To improve the computation efficiency of the planning model, from the temporal scale, a self-adaptive compact panorama time series (CPTS) model is applied, which greatly reduces the number of variables related to short-term decisions. From the spatial scale, a network-constrained relaxed clustered unit commitment (NC-RCUC) model is introduced, which significantly reduces the number of variables related to unit commitment decisions. Case studies on the modified Garver’s 6-node system and HRP-38 system prove the validation and efficiency of the proposed model (“HRP” stands for high renewable penetration). The studies on the China power grid in 2035 demonstrate the future planning results of generation, transmission and storage in China power systems based on the proposed model. [ABSTRACT FROM AUTHOR]

The paper provides a novel framework to study the accuracy and stability of numerical integration schemes when employed for the time domain simulation of power systems. A matrix pencil-based approach is adopted to evaluate the error between the dynamic modes of the power system and the modes of the approximated discrete-time system arising from the application of the numerical method. The proposed approach can provide meaningful insights on how different methods compare to each other when applied to a power system, while being general enough to be systematically utilized for, in principle, any numerical method. The framework is illustrated for a handful of well-known explicit and implicit methods, while simulation results are presented based on the WSCC 9-bus system, as well as on a 1,479-bus dynamic model of the All-Island Irish Transmission System. [ABSTRACT FROM AUTHOR]

This paper proposes a novel stochastic robust real-time power dispatch model considering wind uncertainty. In this dispatch model that incorporates automatic power generation control, system constraints are constructed with affinely adjustable robust optimization to enhance the system security, while the objective concerning the expected value of generation cost is optimized to improve the cost efficiency. The optimized objective is consistent with stochastic optimization, while the formulation for the objective is different. A Nataf conversion-based three-point estimate (NC-TPE) is adopted, which uses an approximating function to formulate the expected generation cost with deterministic estimate points. Compared to traditional stochastic sampling methods, the deterministic assessment method NC-TPE achieves an accurate formulation with more stable and efficient computation performance. The dispatch model is derived as a problem with nonconvex objective and bilinear constraints using the dual theory. To address the highly nonconvex problem, the objective and bilinear constraints are first converted to difference-of-convexity functions, and then a tailored difference-of-convexity optimization is employed to convexify the nonconvex functions, such that the original problem can be solved with an iterative quadratically constrained program. Numerical simulations demonstrate the economic superiority and robustness of the proposed model, as well as the effectiveness of the convexified solution. [ABSTRACT FROM AUTHOR]

The wide variety of inverter control settings for solar photovoltaics (PV) causes the accurate knowledge of these settings to be difficult to obtain in practice. This paper addresses the problem of determining inverter reactive power control settings from net load advanced metering infrastructure (AMI) data. The estimation is first cast as fitting parameterized control curves. We argue for an intuitive and practical approach to preprocess the AMI data, which exposes the setting to be extracted. We then develop a more general approach with a data-driven reactive power disaggregation algorithm, reframing the problem as a maximum likelihood estimation for the native load reactive power. These methods form the first approach for reconstructing reactive power control settings of solar PV inverters from net load data. The constrained curve fitting algorithm is tested on 701 loads with behind-the-meter (BTM) PV systems with identical control settings. The settings are accurately reconstructed with mean absolute percentage errors between 0.425% and 2.870%. The disaggregation-based approach is then tested on 451 loads with variable BTM PV control settings. Different configurations of this algorithm reconstruct the PV inverter reactive power timeseries with root mean squared errors between 0.173 and 0.198 kVAR. [ABSTRACT FROM AUTHOR]

Transmission system operators (TSOs) in recent years have faced challenges in order to ensure maximum transmission capacity of the system to satisfy market needs, while maintaining operational safety and permissible impact on the environment. A great help in the decision-making process was introduced with the Dynamic Thermal Rating (DTR) – an instrument to monitor and predict the maximal allowed ampacity of the power grid based on weather measurements and forecast. However, the introduction of DTR raises a number of questions related to the accuracy and uncertainty of the results of thermal assessment and the level of acceptable risk and its management. In this paper, we present a solution for estimating DTR uncertainty, appropriate for operational use at TSOs. With the help of conductor surface temperature measurements, weather measurements and predicted weather data, we also estimate the error of the weather forecast and the DTR itself. Following the results of the data analyses, we build an operative solution for estimating the ampacity uncertainty based on Monte Carlo random simulations and integrate it into the operational environment of ELES – the operator of the Slovenian electric power transmission network. [ABSTRACT FROM AUTHOR]

This paper focuses on the issue of network connectedness (NC) in security-constrained optimal transmission switching problems, which is complicated by branch contingencies and corrective line switching. Two criteria are firstly proposed with the principle of preserving NC as much as possible within reasonable limits. By extending the electrical flow based NC constraints, a proposition is derived to associate different cases of NC with the optimum of a linear program, yielding the mathematical formulation of the NC criteria. By Karush-Kuhn-Tucker conditions, this formulation is further transformed into a tractable version which can be incorporated with existing SCOTS models without affecting the applicability of original solution approaches. Finally, case studies on various networks and SCOTS models demonstrate the efficacy of the proposed approach. [ABSTRACT FROM AUTHOR]

With the new feature of multi-energy coupling and the advancement of the energy market, Energy Internet (EI) has higher requirements for the efficiency and applicability of integrated energy response. This paper proposes an indirect multi-energy transaction (IMET) to promote multi-energy collaborative optimization in local energy market (LEM) and improve energy utilization through personalized responses from We-Energies (WEs). Firstly, an indirect customer-to-customer multi-energy transaction is modeled for local multi-energy coupling market which can satisfy privacy, preference and autonomy of users. The efficiency of energy matching can be promoted through the participation of conversion devices. In addition, multi-time scale hybrid trading mechanism is constructed with the consideration of the transmission speed of different energy sources. Meanwhile, energy transaction process is built as a Markov decision process (MDP) with deep reinforcement learning algorithm so that the system modeling error can be successfully avoided. Furthermore, a distributed training structure is utilized to obtain more experience for a wider range of scenarios. The results of numerical simulations demonstrate the performance of the proposed method. [ABSTRACT FROM AUTHOR]

The existing research on voltage-source converter HVDC (VSC-HVDC) system stability mostly focuses on small-signal stability analysis methods. However, when large-signal disturbances occur, the intrinsic nonlinearity of the VSC-HVDC system becomes inevitable so that the small-signal studies are no longer valid. In this paper, a large-signal stability analysis method of the VSC-HVDC system is proposed based on the estimation of domain of attraction (DOA). This method can not only analyze the asymptotic stability of the operating point, but also answer the question of how large deviations from the operating point can be tolerated by the system. By using Takagi-Sugeno (T-S) fuzzy model and Lyapunov stability theorem, the DOA of the VSC-HVDC System at the operating point is estimated, and the large-signal stability of VSC-HVDC System is analyzed. On this foundation, the influence of system parameters on the large-signal stability is studied. The results can be used to guide the adjustment of system parameters to solve the problem of system instability. The time-domain simulations conducted in Matlab/Simulink are used to test the stability of the system under large-signal disturbance in the range of DOA. The simulation results verify the feasibility and effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

The increasing of electric vehicles (EVs) alleviates the faced environmental problems but brings challenges to the optimal operation of transportation network (TN) and distribution network (DN). However, the most of existing research works consider EV charging station assignment and navigation services in the TN separately from charging station power scheduling services in the DN. To overcome this research gap, this paper proposes a collaborative optimal routing and scheduling (CORS) method, providing optimal route to charging stations and designing optimized charging scheduling schemes for each EV. In the order of reporting, whenever an EV reports its charging demand, a CORS optimization model is built and solved so that a specific charging scheme is designed for that EV. Then, the TN and DN status is updated to guide the subsequent EVs operating. The proposed CORS integrates the real-time state of the TN and DN, and effects positive benefits in helping EVs to avoid traffic congestion, improving the utilization level of charging facilities and enhancing charging economy. The combined distributed biased min consensus algorithm and generalized benders decomposition algorithm are adopted to solve the complex nonlinear optimization problem. Through comparing with the existing methods, better effectiveness is verified by simulation results. [ABSTRACT FROM AUTHOR]

This paper proposes a market framework to approach economic dispatch as a subproblem in smart distribution systems. Four subproblems are associated with four different submarkets (SMs) in the presented framework. Market participants are eligible to bid in different submarkets based on the type of their distributed generation (DG) unit. To effectively tackle the conflicts among objective functions of different submarkets, the corresponding formulated subproblems are assigned to two different agents, namely distribution system operator (DSO) and a green bank agent (GBA). A communication mechanism is designed within the proposed framework such that DSO and GBA compromise their solutions and find a tradeoff to reasonably address the concerns of the four subproblems within SMs 1-4. The effectiveness of the proposed market framework is validated on a well-known 136-bus distribution system, which is modified to contain wind turbine DG aggregators, photovoltaic DG aggregators, and diesel-engine DG aggregators. [ABSTRACT FROM AUTHOR]

Some of the deadliest wildfires in the U.S., such as California’s 2018 wildfires, have been ignited by power systems. In an effort to prevent and minimize the ignition of wildfires, or control them if ignited, energy companies have developed wildfire mitigation plans. This paper provides energy companies and power system operators, engineers, researchers, and suppliers an overview of the state-of-the-art studies that address key topics in these wildfire mitigation plans and compares the wildfire mitigation plans of several energy companies. The key topics include grid design and system hardening, asset management and inspection, situational awareness and forecasting, operational response, vegetation management, public safety power shutoff, and risk-spend efficiency. This paper also presents a comparison of several energy companies’ decision-making criteria for initiating a public safety power shutoff. Finally, we discuss opportunities for future research studies that could help energy companies prevent wildfire ignitions. [ABSTRACT FROM AUTHOR]

With the large-scale wind power integration into the power system, the inertia and damping characteristics of the system have been weakened, which is not conducive to fulfill the grid-friendly operation of wind power. Aiming at this, an adaptive control scheme combining virtual inertia control (VIC) and supplementary damping controller (SDC) is proposed in this paper. Firstly, the mathematical model of wind grid-connected power system with VIC is established. Secondly, the polytopic linear parameter varying (LPV) system is built to describe the uncertainty of system operating points, and the gap metric-based nonlinear evaluation method is used for polytope vertex configuration. Next, Youla-Kucera parametrization are extended to polytopic LPV system to design an adaptive damping control, in which VIC and SDC are coordinated to provide damping and virtual inertia simultaneously. Finally, the proposed adaptive control scheme is compared with several existing control techniques to validate its effectiveness and advantages in suppressing system oscillation in the modified IEEE 39-bus system integrated with 2 wind turbines. [ABSTRACT FROM AUTHOR]