Search

The uncertain nature of renewable energy resources (RERs) and fast demand response lead to recurring voltage violations in the power systems, which causes frequent transformer tap shifting and capacitor switching. Therefore, this paper resorts to the static var compensators (SVCs) to manage the bus voltages based on the multi-agent deep reinforcement learning (MA-DRL) algorithm. The proposed scheme includes several system agents and SVC agents to collaboratively adjust the injected reactive power to restrict the bus voltages within the normal range. All the agents are trained centrally and executed separately, which requires minimum communication cost. The IEEE 14-bus system, IEEE 300-bus system, and China 157-node urban power grid are used to verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

In practical power systems, it is still very challenging to figure out a cost-effective undervoltage load shedding (UVLS) scheme that can reliably and adaptively react to the short-term voltage stability (SVS) problem. Faced with this challenge, this paper develops an intelligent data-driven predictive UVLS scheme for online SVS enhancement. Inspired by valuable ideas in model predictive control and supplementary excitation control in power systems, a novel deep feedback learning machine (DFLM) is designed to precisely predict future voltage violations after UVLS execution. With the help of the DFLM, the UVLS scheme is aware of potential effects of various candidate UVLS actions. Owing to this desirable nature, it can adaptively respond to diverse SVS conditions and optimize UVLS decisions in a non-iterative way. Further, two well-designed strategies, i.e., stepwise constraint relaxation and incremental DFLM adaptation, are introduced to enhance the scheme's reliability and adaptability during online application. Numerical test results on the Nordic test system and the realistic North GZ Power Grid in China showcase the excellent performances of the proposed scheme. [ABSTRACT FROM AUTHOR]

To make better use of local generators' dynamic var reserve to improve short-term voltage stability (STVS), this paper proposes an integrated high side var-voltage control (IHSV^2C) for power plants in receiving-end power systems. The IHSV^2C consists of a plant-level multi-machine var coordinator (MMVC) and several unit-level high side voltage controllers (HSVCs). MMVC coordinates the reactive power output among generators and provides control parameters for HSVCs, while HSVCs can maintain the voltage of a pre-defined voltage control point (VCP) by regulating the voltage reference of the excitation control of each generator. Therefore, when the system suffers a serious fault, IHSV^2C can drive the generators to provide stronger var support. Consequently, the voltage stability can be improved. A conceptual model of the receiving-end power system in China Southern Power Grid (CSG) is established, and the IHSV^2C has been validated through a simulation analysis on the system. Both time-domain simulation results and the voltage sag severity index (VSSI) have fully demonstrated its performance. Therefore IHSV^2C offers a new and effective approach to improve STVS of receiving-end power systems. [ABSTRACT FROM AUTHOR]

Due to the uneven geographical distribution between load and wind power, currently it is difficult to integrate the large-scale wind power into the State Grid in China. There are significant wind curtailments for wind farms due to system restrictions. This paper proposes a new way of utilizing wind power, i.e., in-situ consumption, as an alternative to the costly development of long-distance transmission of large-scale wind power. Electrolytic aluminum load, which is one of the most typical high energy consuming loads, is employed to absorb the excess wind power in western China. An actual isolated industrial power system for aluminum production driven by wind power and coal-fired power is described. The penetration level of wind power in the isolated power system is up to 48.8%. The power imbalance between generation and load demand caused by wind power fluctuation or the tripping of coal-fired generators can dramatically impact the frequency stability of the isolated power system, which is of small inertia. An online identification method of power imbalance based on Wide Area Measurement System (WAMS) is presented. According to the characteristics of the electrolytic aluminum load, a system frequency control method by regulating the bus voltages of aluminum loads to eliminate the power imbalance is introduced. The simulation is done in Real Time Digital Simulator (RTDS) and the results verify the validity of the proposed frequency control method. [ABSTRACT FROM PUBLISHER]

The power industry in China has grown significantly over the past decade, spurring the adoption of system-wide automatic voltage control (AVC) technology to meet stricter requirements for security and economical power system operation. To cope with the rapidly developing and frequently changing Chinese power grid, an AVC scheme based on adaptive zone division is introduced in this paper. Logically, this type of system has a three-level hierarchical structure, but, here, both secondary voltage control (SVC) and tertiary voltage control (TVC) are implemented via software at the same control center. The control zones are no longer fixed but are reconfigured online and updated in accordance with variations in the grid structure. The technical details of these procedures are presented here. The implementation of TVC (which is based on an online reactive optimal power flow) and SVC are also discussed, together with some technical details on improvements to their reliability and robustness. Some results obtained from field-site applications based on similar-days testing rather than simulations are employed to evaluate the performance and improvements of the AVC system. This system has been installed at over 20 control centers in China. [ABSTRACT FROM PUBLISHER]