Search

Conventional droop control methods for power-sharing in a multi-terminal high voltage DC (MTDC) grid lead to voltage deviation from the nominal value. Moreover, the power-sharing is inaccurate in the droop-controlled MTDC system. This paper proposes a secondary controller with a distributed architecture to compensate the voltage deviation and to achieve equal power sharing automatically among the converter stations. A distributed observer is used to estimate the average voltage of the converter stations. The proposed distributed controller and observer use local measurements of output powers and voltages, and only communicate with neighboring stations. Therefore, the requirement of the global information in the centralized secondary control schemes is eliminated, which reduces the communication requirement and improves the reliability of the MTDC grid. The case studies illustrate that the proposed distributed controller regulates the stations’ average voltage and shares the power mismatch accurately. Impact of the communication time-delays and the control gain on stability of the MTDC grid are also investigated using the Lyapunov-KrasovskiiLMI condition. It is shown that reducing the control gain can stabilize the MTDC grid in the case of large communication time-delays. [ABSTRACT FROM AUTHOR]

The ever-increasing utilization of sensitive loads in the industrial, commercial, and residential areas in distribution networks requires enhanced reliability and quality of supply. This can be achieved, thanks to self-healing features of smart grids that already include the control technologies necessary for the restoration strategy in case of a fault. In this paper, an analytical and global optimization model is proposed for the restoration problem. A novel mathematical formulation is presented for the reconfiguration problem reducing the number of required binary variables while covering more practical scenarios compared to the existing models. The considered self-healing actions besides the network reconfiguration are the nodal load-rejection, the tap setting modification of voltage regulation devices (incl. OLTCs, SVR, and CBs), and the active/reactive power dispatch of DGs. The voltage dependency of loads is also considered. Thus, the proposed optimization problem determines the most efficient restoration plan minimizing the number of de-energized nodes with the minimum number of self-healing actions. The problem is formulated as a Mixed-Integer Second Order Cone Programming (MISOCP) and solved using the Gurobi solver via the MATLAB interface YALMIP. A real 83–node distribution network is used to test and verify the presented methodology. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive set of steady-state models to be included in power flow simulation studies of dc railway networks. This simulation framework covers all important aspects and features of each element of modern dc railways. The proposed models are simplified to achieve the maximum simulation speed while keeping the required accuracy. Not only nonreversible, controlled, and uncontrolled reversible substations are considered, but also onboard and offboard accumulation systems. The train model can consider the low network receptivity (overvoltage protection for trains equipped with regenerative braking) and overcurrent protection. It is also possible to include in the simulation dc/dc links between nodes of the railway network at the same or different voltage. To date, there is no other work able to conjugate all the mentioned models in a complex multitrain scenario. [ABSTRACT FROM AUTHOR]

This paper proposes a two-level voltage controller for large-scale power systems. The aim of the controller is to maintain a near-optimal voltage profile in the transmission network by coordinating discrete reactive power (var) control devices in the system. The controller is targeted for implementation in electric power transmission utility companies where most of the voltage controls are coordinated by switching of discrete var devices such as shunt capacitor and reactor banks and transformer banks load tap changers (LTCs). By effectively dividing the controller responsibilities between local substation controls and a central coordinator at control center level, the design is aimed at voltage control of large-scale power systems. At local level, the substation controllers maintain their respective substation bus voltages by local power-flow-like computations using mostly local PMU measurements. The central coordinator computes and provides the voltage set-points to the substation controllers and also coordinates by enabling or disabling the local controllers as needed. The controller is being designed towards prototype implementation in Southern California Edison (SCE), starting with local controllers at specific substations in the first stage. It is tested on real-time dynamic models and large-scale power-flow simulations of SCE transmission network. [ABSTRACT FROM AUTHOR]

This paper proposes a new coordinated voltage control scheme to ensure voltage security of power systems. The scheme schedules reactive power injection from VAR sources, including synchronous generators and condensers, capacitor banks, switchable reactors and FACTS devices, to ensure desired loading margin of power systems for a given horizon of time. The problem is treated as voltage security constrained multi-period optimal reactive power flow (VSC-MPORPF). To incorporate scheduling of both continuous and discrete VAR sources, the VSC-MPORPF is formulated as a mixed-integer nonlinear programming problem, and is solved using generalized Benders decomposition (GBD). Multi-period formulation ensures both optimal switching pattern of discrete voltage controllers and voltage security for a given future horizon. Also, to make the proposed method applicable for large-scale power systems, optimality condition decomposition approach is utilized, along with the GBD. The proposed methodology is examined through case studies conducted on a simple 6-bus, the IEEE 118-bus, and a 1180-bus test systems. The results demonstrate effectiveness and efficiency of the proposed framework in real-time operation of power systems. [ABSTRACT FROM PUBLISHER]