Search

Line-switching operations introduce several concerns to microgrid operators since they trigger reliability and power quality issues in addition to increasing the wear and tear cost of switching devices. This paper proposes a novel methodology for achieving seamless line-switching in low-inertia islanded microgrids. The proposed methodology aims at mitigating the detrimental line-switching impacts by minimizing the power flow in the switched lines at the moments of executing the switching operations. The minimization of the power flow is realized by optimizing the droop control parameters of the DGs during the transition from one network topology to another. Besides, during executing a series of line-switching operations, the sequence of switching is also optimized to minimize the total switched power. While optimizing the line-switching execution sequence, the transitional droops are optimized for each line-switching operation within that sequence. A dynamic mixed-integer nonlinear programming problem is formulated to find both the optimized dynamic transitional droops and line-switching sequence simultaneously. Simulation results demonstrate the effectiveness of the proposed seamless line-switching methodology where the switched power can be reduced by more than 80% for a single line-switching operation and 54% considering a series of four switch exchanges in addition to achieving several instances of zero-current switching. As a result, a significant decrease in the peak of voltage transients has been recorded for some cases. [ABSTRACT FROM AUTHOR]

In this paper, we propose a topology-cognizant optimal power flow (OPF) paradigm with additional safety constraints for multi-terminal direct current (MTDC) grids. The resulting formulation is concerned with the optimization of controller set-points, i.e., voltage and power levels at each bus, and the switching status of transmission lines that collectively referred to as grid topology. A pair of additional safety constraints are integrated into the problem formulation to prevent voltage violations caused by power fluctuations in between two controller set-point updates. Searching for a grid topology that offers more efficient operation leads to a mixed-integer nonlinear program (MINLP) which is computationally challenging due to: i) Non-convex power flow equations, (ii) Non-convex converter loss equations, and iii) Binary variables accounting for the operational status of transmission lines. Non-convexities of power flows and converter loss equations are tackled by means of a mixed-integer second-order cone programming (MISOCP) relaxation, while the optimal switching status of transmission lines are determined via a branch-and-bound search. Numerical results for the modified IEEE 14, 30, and 57-bus systems are used to verify the merits of the proposed method. Furthermore, this method is experimentally validated using the CIGRE B4 DC grid benchmark in a real-time hardware-in-the-loop platform. [ABSTRACT FROM AUTHOR]

This paper presents a new control method, in which a distributed generator (DG) actively participates in steady-state voltage control, together with an under-load tap changer (ULTC) and shunt capacitors (Sh.Cs). In the conventional DG control method, the integration of DGs into a distribution power system increases the number of switching operations of the ULTC and the Sh.Cs. To solve this problem, this paper proposes that the DG output voltage be dispatched cooperatively with the operation of the ULTC and the Sh.Cs, based on load forecasts for one day in advance. The objective of the proposed method is to decrease the number of switching device operations, as well as to reduce the power loss in the distribution lines, while maintaining the grid voltage within the allowed range. The proposed method is designed and implemented with Matlab, using two different dynamic programming algorithms for a dispatchable and a nondispatchable DG, respectively. Simulation studies demonstrate that the objective can be achieved under various grid conditions, determined by factors such as the DG output power characteristics, the location of the DG-connected bus on the feeder, and the load profile of the feeder containing the DG. [ABSTRACT FROM PUBLISHER]

This paper introduces a new method of removing thermal overloads and voltage limits in an electric power system by means of the Evolution of Corrective and Preventive control Actions (ECPA). The goal is to find the minimum number of control actions that solve the identified limit violations at minimum cost. A recombination operator based on form theory allows the codification of control actions in a natural and simple way. ECPA has been tested on the IEEE 30-bus and the IEEE 118-bus systems. The limit violations are solved at minimum cost and with fewer control actions on average than alternative methods. [ABSTRACT FROM AUTHOR]

This paper proposes a new coordinated voltage control scheme to ensure voltage security of power systems. The scheme schedules reactive power injection from VAR sources, including synchronous generators and condensers, capacitor banks, switchable reactors and FACTS devices, to ensure desired loading margin of power systems for a given horizon of time. The problem is treated as voltage security constrained multi-period optimal reactive power flow (VSC-MPORPF). To incorporate scheduling of both continuous and discrete VAR sources, the VSC-MPORPF is formulated as a mixed-integer nonlinear programming problem, and is solved using generalized Benders decomposition (GBD). Multi-period formulation ensures both optimal switching pattern of discrete voltage controllers and voltage security for a given future horizon. Also, to make the proposed method applicable for large-scale power systems, optimality condition decomposition approach is utilized, along with the GBD. The proposed methodology is examined through case studies conducted on a simple 6-bus, the IEEE 118-bus, and a 1180-bus test systems. The results demonstrate effectiveness and efficiency of the proposed framework in real-time operation of power systems. [ABSTRACT FROM PUBLISHER]