Search

The cascaded control method with an outer voltage loop and an inner current loop has been traditionally employed for the voltage and power control of photovoltaic (PV) inverters. This method, however, has very limited power regulation capability. With the fast increasing penetration of PV power generation systems in the distribution network, the voltage rise/drop has become a serious problem impacting negatively on the power quality and grid stability. Therefore, flexible power regulation is highly desired for PV inverters to provide ancillary services. This paper proposes a novel model predictive power control (MPPC) scheme to control and coordinate the dc-dc converter and inverter for grid-connected PV systems with energy storage systems (ESS). By regulating the dc-bus voltage and controlling the active and reactive power flows, MPPC can support the power grid to maintain stable voltage and frequency and improve the power factor. Numerical simulation and controller hardware-in-the-loop (CHIL) testing have been conducted on a PV-ESS system to verify the capability and effectiveness of the proposed control strategy.

Made available in DSpace on 2020-12-10T19:52:45Z (GMT). No. of bitstreams: 0 Previous issue date: 2020-03-01 Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Norges Forskningsradet The presence of single-phase distributed generators unevenly injecting active power in three-phase microgrids may create undesired upstream current unbalance. Consequently, voltage asymmetry and even active power curtailment may occur in such networks with negative economic impact. Thus, this paper proposes an optimal multiobjective approach to regulate the active and reactive power delivered by distributed generators driven by a three-layer hierarchical control technique in low-voltage microgrids. This method does not require previous knowledge of network parameters. The multiobjective algorithm is implemented in the secondary level achieving optimal dispatch in terms of maximizing the active power generation, as well as minimizing the reactive power circulation and current unbalance. By the existence of a utility interface three-phase converter placed at the point-of-common-coupling, the proposed control can regulate the power circulating among the microgrid phases, and the microgrid structure can withstand grid-connected and islanded operating modes. The path for interphase power circulation through the DC-link of the utility interface allows the multiobjective algorithm to achieve better results in terms of generation and compensation compared to the system without utility interface. The proposed method is assessed herein by computational simulations in a three-phase four-wire microgrid under realistic operational conditions. Univ Fed Minas Gerais, Grad Program Elect Engn, BR-31270010 Belo Horizonte, MG, Brazil Fed Inst Minas Gerais, Campus Ipatinga, BR-35164261 Ipatinga, Brazil Sao Paulo State Univ, Grp Automat & Integrated Syst, BR-18087180 Sorocaba, Brazil Norwegian Univ Sci & Technol, Dept Elect Power Engn, N-7491 Trondheim, Norway Sao Paulo State Univ, Grp Automat & Integrated Syst, BR-18087180 Sorocaba, Brazil CNPq: 420850/2016-3 FAPESP: 2017/24652-8 FAPESP: 2016/08645-9 Norges Forskningsradet: f261735/H30 Norges Forskningsradet: TSG-00112-2019

This paper proposes a fully distributed control methodology for secondary control of ac microgrids. The control framework includes three modules: 1) voltage regulator; 2) reactive power regulator; and 3) active power/frequency regulator. The voltage regulator module maintains the average voltage of the microgrid distribution line at the rated value. The reactive power regulator compares the local normalized reactive power of an inverter with its neighbors’ powers on a communication graph and, accordingly, fine-tunes Q-V droop coefficients to mitigate any reactive power mismatch. Collectively, these two modules account for the effect of the distribution line impedance on the reactive power flow. The third module regulates all inverter frequencies at the nominal value while sharing the active power demand among them. Unlike most conventional methods, this controller does not utilize any explicit frequency measurement. The proposed controller is fully distributed; i.e., each controller requires information exchange with only its neighbors linked directly on the communication graph. Steady-state performance analysis assures the global voltage regulation, frequency synchronization, and proportional active/reactive power sharing. An ac microgrid is prototyped to experimentally validate the proposed control methodology against the load change, plug-and-play operation, and communication constraints such as delay, packet loss, and limited bandwidth.