Search

This paper proposes a current-fed single-phase inverter without constant intermediate DC link. It eliminates electrolytic capacitor from the DC-link and introduces an intermediate pulsating DC bus. The proposed topology is modular with three full-bridges making it scalable for high-power applications. New pulsating-DC-modulation for back-end pulsating DC-link inverter and secondary modulation (SM) for front-end DC-to-pulsating DC converter is proposed. Soft-switching and device voltage clamping of both primary side and secondary side devices of front-end current-fed full-bridge converter is realized. A rotating partial hybrid pulsewidth modulation has been introduced. One leg of inverter is commutated at a low switching frequency, while the other leg is operated at a high switching frequency for partial period of a line frequency cycle. Thus, switching losses of the back-end inverter are considerably reduced. Rotating mechanism is used to equalize the switching losses of four switches of the inverter. This paper presents detailed operation and analysis of the topology with a proposed modulation scheme. Simulation and experimental results validate the effectiveness and accuracy of the proposed modulation scheme as well as soft-switching and performance of the converter. [ABSTRACT FROM PUBLISHER]

This paper deals with a control method that adapts the dc bus voltage of electric traction systems using permanent-magnet synchronous machine (PMSM) fed by bidirectional $Z$-source inverter (ZSI) or other improved topologies. This control allows reducing both the overestimation of the dc bus voltage and losses in the inverter. The sliding-mode control (SMC) method is used to control the $Z$-source converter, whereas flatness-based control is proposed to drive the actuator and generate the peak dc bus voltage reference. Flatness-based control is chosen because the actuator transients are well mastered. Extra shoot-through zero inverter states are inserted by means of implemented algorithm on a space-vector-modulation (SVM) scheme. Different short-circuit strategies are studied and compared according to constraint criteria. Both simulation and experimental results are presented and discussed to validate the proposed voltage adaptation strategy and the improvement on global efficiency. [ABSTRACT FROM AUTHOR]

This paper presents a six-phase current reconstruction scheme for dual traction inverters in hybrid electric vehicles (HEVs) with a single dc-link current sensor. During the phase current reconstruction, one of the inverters is proposed to operate using active vectors, whereas the other inverter operates using nonactive vectors. An advanced phase-shift scheme for all pulsewidth-modulated (PWM) signals based on the sequence of duty cycles is implemented. PWM signals are considered in three types: large, medium, and small duty cycles. Then, the minimum phase-shift scheme is applied to each type of PWM signal to ensure the minimum duration of the active vector for stable current reconstruction. With this proposed phase-shift scheme, the maximum allowable modulation index and dc-link voltage utilization are improved. In addition, the relationship between the minimum required time for stable phase current reconstruction and the maximum allowable modulation index is derived theoretically. The effectiveness of the proposed method is verified by both simulation and experimental results. With this scheme, cost and volume of dual inverters in HEVs are reduced, considering the lower number of current sensors. [ABSTRACT FROM PUBLISHER]

Cell voltage equalizers are necessary to ensure years of operation for series-connected supercapacitors (SCs) by eliminating cell voltage imbalance. Conventional equalizers require numerous switches and/or magnetic components; hence, the circuit complexity and size tend to increase. In this paper, a double-switch single-transformer equalizer, which is based on the combination of a half-bridge inverter and a voltage multiplier, is proposed. The operation of the proposed equalizer is analyzed in detail, and a dc equivalent circuit is mathematically derived. Experimental equalization tests were performed for eight SCs connected in series under a voltage-imbalanced condition. The energy of the series-connected SCs was preferentially redistributed to SCs with low voltages, and eventually, the voltage imbalance was eliminated, demonstrating the equalization performance. Simulation-based equalizations using the derived dc equivalent circuit were also performed under the same condition as the experiments. The experimental and simulation results were in good agreement, indicating that the derived dc equivalent circuit can adequately express real equalization profiles. [ABSTRACT FROM PUBLISHER]