Search

This paper considers optimal joint time, frequency, and power allocation for energy-efficient device-to-device (D2D) communications in an overlay cellular network, where multiple D2D transmitters communicate with their corresponding D2D receivers while utilizing the energy harvested from a cellular base station (BS). Due to channel estimation error and feedback delays, the channel state information (CSI) available at the transmitters is usually imperfect, which can significantly deteriorate the energy efficiency (EE) of the considered system. To mitigate the impact of imperfect CSI, we formulate a non-convex robust optimization problem for the maximization of the EE (in bits/Joule) of the system while ensuring quality of service (QoS) requirements on the minimum data rata and the minimum amount of harvested energy for cellular and D2D users, respectively. We reveal that the optimal energy-efficient D2D transmission should exhaust all the harvested energy of each D2D transmitter. Exploiting this fact, we propose an efficient iterative algorithm for obtaining the optimal solution. To strike a balance between performance and computational complexity, we further propose a low-complexity suboptimal algorithm. Simulation results show that compared with several baseline schemes, both the proposed optimal and suboptimal algorithms can significantly improve the EE of wireless-powered D2D communications under imperfect CSI. Moreover, the proposed suboptimal algorithm is close-to-optimal when the number of cellular users are small or the channel estimation error is large. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicles (UAVs) are anticipated to be widely deployed in future wireless communications, due to their advantages of high mobility and easy deployment. However, the broadcast nature of air-to-ground line-of-sight wireless channels brings a new challenge to the information security of UAV-ground communication. This paper tackles such a challenge in the physical layer by exploiting the mobility of UAV via its trajectory design. We consider a UAV-ground communication system with multiple potential eavesdroppers on the ground, where the information on the locations of the eavesdroppers is imperfect. We formulate an optimization problem, which maximizes the average worst case secrecy rate of the system by jointly designing the robust trajectory and transmit power of the UAV over a given flight duration. The nonconvexity of the optimization problem and the imperfect location information of the eavesdroppers make the problem difficult to be solved optimally. We propose an iterative suboptimal algorithm to solve this problem efficiently by applying the block coordinate descent method, $\mathcal {S}$ -procedure, and successive convex optimization method. Simulation results show that the proposed algorithm can improve the average worst case secrecy rate significantly, as compared to two other benchmark algorithms without robust design. [ABSTRACT FROM AUTHOR]

This paper aims at solving two classes of energy efficiency (EE) maximization problems in multiple channels wireless communication systems. First, the EE maximization problem with sum power constraint is solved based on the geometric water-filling approach; and second, the approach is extended into the EE maximization problem with additional least throughput requirement constraint. Our proposed algorithms make use of the water-filling structure of the optimal solution and provide exact and computation efficient solution to the energy-efficient power allocation problems. The proposed algorithms also have excellent scalability, which is applicable for large-scale wireless communication systems. Optimality of the proposed algorithms is strictly proved, and the proposed algorithms only require low-degree polynomial computational complexity. Numerical results are presented to demonstrate the efficiency of the proposed algorithms. To the best of our knowledge, no prior algorithms in the existing literature could provide such solutions to the EE maximization problems under the merit of exactness and the efficiency. [ABSTRACT FROM AUTHOR]

In this paper, we focus on a UAV-assisted cooperative communication system based on simultaneous wireless information and power transfer (SWIPT), where the UAV serves as a relay and its transmission capability is partly powered by radio signal from the source via the time-sharing mechanism. We study the end-to-end cooperative throughput maximization problem by optimizing the UAV's decision profile, power profile and trajectory for both amplify-and-forward (AF) and decode-and-forward (DF) protocols. The problem is decomposed into three optimization subproblems for decision profile, power profile and trajectory, and solved through alternating optimization, by which each of the subproblems is solved with the other two fixed. A binarization algorithm is further proposed to make the decision profile feasible. We show that the proposed solution outperforms not only two SWIPT-based strategies, but also a similar solution from an existing work without consideration for SWIPT. In addition, results indicate that the proposed algorithm performs efficiently in both optimality and convergence. [ABSTRACT FROM AUTHOR]

This paper tackles a power minimization problem of interleave-division multiple-access (IDMA) systems over a fading multiple-access channel. The problem is minimizing the total power received by the receiver while keeping the bit error rates (BERs) of all users below a predefined value. The original formulation of the problem has highly nonlinear and implicitly defined functions, which render most existing optimization methods incapable. A new formulation is proposed in this paper, whose solution can effectively be obtained by a branch-and-bound (B&B) technique. An algorithm is devised based on B&B, and its effectiveness is also demonstrated by numerical experiments of systems with a moderate numbers of users. [ABSTRACT FROM AUTHOR]

In this paper, we consider the problem of power control for sum-rate maximization on multiple interfering links [transmitter–receiver pairs (Tx–RX)] under a sum power constraint. We consider a single-frequency network, where all pairs are operating in the same frequency band, thereby creating interference with each other. We study the power-allocation problem for sum-rate maximization with and without quality-of-service (QoS) requirements on individual links. When the objective is only sum-rate maximization without QoS guarantees, we develop an analytic solution to decide optimal power allocation for a two-TX–RX-pair problem. We also develop a low-complexity iterative algorithm for a three-TX–RX-pair problem. For a generic N>\3 TX–RX pair problem, we develop two low-complexity suboptimal power-allocation algorithms. The first algorithm is based on the idea of making clusters of two or three TX–RX pairs and then leveraging the power-allocation results obtained for the two- and three-TX–RX-pair problems. The second algorithm is developed by using a high signal-to-interference-plus-noise ratio (SINR) approximation, and this algorithm can be also implemented in a distributed manner by individual TXs. We then consider the same problem but with additional QoS guarantees for individual links. We again develop an analytic solution for the two-TX–RX-pair problem and a distributed algorithm for N>\2 TX–RX pairs. [ABSTRACT FROM PUBLISHER]

In cooperative communication networks, owing to the nodes' arbitrary geographical locations and individual oscillators, the system is fundamentally asynchronous. Such a timing mismatch may cause rank deficiency of the conventional space–time codes and, thus, performance degradation. One efficient way to overcome such an issue is the delay-tolerant space–time codes (DT-STCs). The existing DT-STCs are designed assuming that the transmitter has no knowledge about the channels. In this paper, we show how the performance of DT-STCs can be improved by utilizing some feedback information. A general framework for designing DT-STC with limited feedback is first proposed, allowing for flexible system parameters such as the number of transmit/receive antennas, modulated symbols, and the length of codewords. Then, a new design method is proposed by combining Lloyd's algorithm and the stochastic gradient-descent algorithm to obtain optimal codebook of STCs, particularly for systems with linear minimum-mean-square-error receiver. Finally, simulation results confirm the performance of the newly designed DT-STCs with limited feedback. [ABSTRACT FROM PUBLISHER]

Ultradense heterogeneous networks (HetNets) are emerging as an inevitable approach to tackle the capacity crunch in cellular networks. However, imbalanced load among small and macrocells and poor resource utilization as a consequence in HetNets remains a long-standing problem. This paper addresses this problem by presenting a solution for maximization of coverage and capacity while minimizing load imbalance among macro and small cells. Most recent studies on the topic focus on either optimization of coverage, capacity or load, or a combination of two of these three intertwined objectives. We formulate the optimization problem as a function of two hard parameters namely antenna tilt and transmit power, and a soft parameter, cell individual offset, that affect the coverage, capacity, and load directly. The resulting solution is a combination of the otherwise conflicting coverage and capacity optimization (CCO) and load balancing (LB) self-organizing network (SON) functions. In the presented joint CCO-LB solution, a conflict free operation of CCO and LB is ensured by designing a novel load aware user association methodology and resolving the effects of shadowing on coverage probability using stochastic approximation. The problem is proven to be nonconvex and is solved using genetic algorithm, sequential quadratic programming, and pattern search algorithms. The proposed CCO-LB solution is compared against two recently proposed CCO and CCO-LB solutions in the literature. Results show that the proposed solution can yield significant gain in terms of throughput, spectral efficiency, and load distribution. [ABSTRACT FROM AUTHOR]

This paper considers a heavy loaded full-duplex (FD) small cell consisting of one FD base station and multiple half-duplex users where the number of subchannels is less than the number of uplink and downlink users. With the objective of maximizing the total sum-rate, a joint power allocation, and user pairing problem is formulated. To solve this problem, a novel decomposition method is proposed, which decouples the power allocation and user pairing problem into two subproblems. It is proven that the optimal solution of subproblems is the optimal solution of the original problem. Then, optimal algorithms are developed for the two subproblems. Numerical results show that the proposed algorithm achieves better performance compared with the baselines of the greedy algorithm and random pairing algorithm. [ABSTRACT FROM AUTHOR]

Traffic offloading via device-to-device communications is expected to play a major role to meet the exponential data traffic growth in wireless networks. In this paper, we focus on the problem of user capacity maximization in ultra-dense heterogeneous networks with device-to-device cooperation, where a large number of users in a given geographical area request common data content, such as video on demand streaming, with strict quality of service guarantees. We aim at finding the best strategy for delivering the content either over long range connectivity from the access points or short range connectivity from peer mobile terminals while meeting a target rate per served user. We formulate the multiuser resource management problem as an optimization problem including traffic offloading and channel allocation considering a very high user density reaching up to 1.75 users per square meter. We extend the system model to include mobile terminals acting as content owners by having the content cached locally, in order to further enhance the network capacity and coverage. We then propose an iterative resource management solution, which first solves the optimization subproblem of traffic offloading with orthogonal channels, and then optimally allocates channels to the transmitters with minimized interference due to channel reuse. We also propose efficient suboptimal hierarchical tree-based algorithms that operate in real time with dynamic and fast solutions for ultra-dense networks. For performance evaluation, we consider a realistic scenario consisting of a stadium topology with thousands of mobile terminals active simultaneously. We generate results as a function of a wide range of system parameters, and demonstrate that the proposed algorithms achieve near-optimal performance with notably low time complexity. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the cross-layer resource optimization for wireless relay networks with dynamic node-selfishness information. The degree of intrinsic selfishness (DeIS) and the degree of extrinsic selfishness (DeES) of the relay node (RN) are defined as the effects of its own residual energy resource and the incentive in an incentive mechanism, respectively. A model of two-timescale node-selfishness dynamics is constructed to describe the time-varying characteristics of the RN's DeIS and DeES. Based on the two-timescale node-selfishness dynamics of the RNs, a two-timescale resource-optimization dynamical algorithm (TRODA) is employed to control the transmit powers of both RNs and end users (EU), as well as the flow rates of the data packets injected by all EUs. Meanwhile, the stability and the tracking error of the TRODA under the two-timescale node-selfishness dynamics are analyzed by Lyapunov theory. Our simulation results demonstrate that the two-timescale optimization algorithm is stable and has trivial tracking error. [ABSTRACT FROM AUTHOR]

Femto base stations (FBSs) are cost-effective choices for wireless service providers (WSPs) to provide better indoor coverage and capacity in cellular networks. With the introduction of femtocells, spectrum allocation among macro base stations (MBSs) and numerous FBSs becomes challenging. WSPs will allocate resources among hierarchical infrastructures to mitigate mutual interference and maximize WSPs' revenue from service provisioning. In this paper, we propose a channel allocation and service provision framework to help WSPs allocate resources and increase revenue. The spectrum allocation and revenue maximization problem is formulated as a convex problem, and a centralized method is proposed to efficiently solve it. We also propose a distributed algorithm called LD (based on Lagrangian decomposition) to achieve a near-optimal solution with low computational and communication complexity, which can be used when the system is on a large scale. The simulation results show that our scheme can significantly improve the system's revenue. [ABSTRACT FROM PUBLISHER]

The high-speed railway wireless communication network architecture is gradually transforming from a traditional GSM-Railway (GSM-R) cellular network to a 5G heterogeneous ultra-dense communication network. How to effectively deal with the interference while obtaining the capacity gain has become an inevitable problem. This article proposes a power allocation interference alignment algorithm based on game equilibrium with the goal of joint optimization about throughput and energy efficiency for imperfect channels in high-speed railway communication. Firstly, the imperfect Channel State Information including delay and fading is calculated. Then, in order to improve system throughput and energy efficiency, we establish a game model and prove the existence of Nash equilibrium in the model. At the same time, a power allocation iterative algorithm based on Recurrent Neural Network is proposed. Finally, combined with the interference alignment algorithm based on a maximal signal-to-noise ratio, the optimal power matrix is calculated by iteration to achieve interference management optimization. The simulation results prove that our algorithm has superior performance in improving the system throughput, energy efficiency and transmission reliability in high-speed railway wireless communication with imperfect channels. [ABSTRACT FROM AUTHOR]

Fifth generation new radio aims to facilitate new use cases in wireless communications. Some of these new use cases have highly demanding latency requirements; many of the powerful forward error correction codes deployed in current systems, such as the turbo and low-density parity-check codes, do not perform well when the low-latency requirement does not allow iterative decoding. As such, there is a rejuvenated interest in noniterative/one-shot decoding algorithms. Motivated by this, we propose a signal-to-noise ratio-adaptive convolutionally coded system with optimized constellations designed specifically for a particular set of convolutional code parameters. Numerical results show that significant performance improvements in terms of bit-error-rate and spectral efficiency can be obtained compared to the traditional adaptive modulation and coding systems in low-latency communications. [ABSTRACT FROM AUTHOR]