Search

Millimeter-wave rotary-wing (RW) unmanned aerial vehicle (UAV) air-to-ground (A2G) links face unpredictable Doppler effect arising from the inevitable wobbling of RW UAV. Moreover, the time-varying channel characteristics during transmission lead to inaccurate channel estimation, which in turn results in the deteriorated bit error probability performance of the UAV A2G link. This paper studies the impact of mechanical wobbling on the Doppler effect of the millimeter-wave wireless channel between a hovering RW UAV and a ground node. Our contributions of this paper lie in: i) modeling the wobbling process of a hovering RW UAV; ii) developing an analytical model to derive the temporal autocorrelation function (ACF) for the millimeter-wave RW UAV A2G link in a closed-form expression; and iii) investigating how RW UAV wobbling impacts the Doppler effect on the millimeter-wave RW UAV A2G link. Numerical results show that different RW UAV wobbling patterns impact the amplitude and the frequency of ACF oscillation in the millimeter-wave RW UAV A2G link. For UAV wobbling, the temporal ACF decreases quickly and the impact of the Doppler effect is significant on the millimeter-wave A2G link. [ABSTRACT FROM AUTHOR]

In this paper, we present a novel real-time multiple-input multiple-output (MIMO) channel sounder for the 28 GHz band. Until now, most investigations of the directional characteristics of millimeter-wave channels have used mechanically rotating horn antennas. In contrast, the sounder presented here is based on a phased array structure that performs fast electronic steering of the beams in the horizontal and vertical domains. This approach drastically shortens the measurement times for measurements that are directionally resolved both at the transmitter (TX) and the receiver (RX), and the measurement time per location is reduced from minutes or hours to milliseconds. This not only enables measurement of more TX–RX locations for a better statistical validity but also allows to perform directional analysis in dynamic environments. The sounder also has high phase stability, which, in conjunction with the short measurement time, leads to a low phase drift between TX and RX. This in turn enables phase-coherent sounding of all beam pairs even when TX and RX have no cabled connection for synchronization, and thus avoids any delay ambiguity. Furthermore, the phase stability over time enables complex RX waveform averaging to improve the signal-to-noise ratio during high path loss measurements. The paper discusses the system design as well as the measurements performed for verification of the sounder performance. Furthermore, we present sample results from double directional measurements in dynamic environments. [ABSTRACT FROM AUTHOR]

Utilization of drones as aerial access points (AAPs) is a promising concept to enhance network coverage and area capacity promptly and on demand. The emerging millimeter-wave (mmWave) communication technology may in principle deliver higher data rates, thus, making the use of AAPs more effective. By extending the conventional (planar) stochastic geometry considerations, we construct a novel three-dimensional model for drone-based mmWave communication that captures the high directionality of transmissions as well as the random heights of the communicating entities. Choosing signal-to-interference ratio as our primary parameter of interest, we assess system performance with an emphasis on the impact of the “vertical” dimension in aerial mmWave connectivity. We also demonstrate that accurate performance assessment is only possible with simplified models for certain ranges of input parameters. [ABSTRACT FROM AUTHOR]

Millimeter-wave (mmWave) propagation is known to be severely affected by the blockage of the line-of-sight (LoS) path. In contrast to microwave systems, at shorter mmWave wavelengths such blockage can be caused by human bodies, where their mobility within environment makes wireless channel alternate between the blocked and non-blocked LoS states. Following the recent 3GPP requirements on modeling the dynamic blockage as well as the temporal consistency of the channel at mmWave frequencies, in this paper, a new model for predicting the state of a user in the presence of mobile blockers for representative 3GPP scenarios is developed: Urban micro cell street canyon and park/stadium/square. It is demonstrated that the blockage effects produce an alternating renewal process with exponentially distributed non-blocked intervals, and blocked durations that follow the general distribution. The following metrics are derived 1) the mean and the fraction of time spent in blocked/non-blocked state, 2) the residual blocked/non-blocked time, and 3) the time-dependent conditional probability of having blockage/no blockage at time t1 given that there was blockage/no blockage at time t0 . The latter is a function of the arrival rate (intensity), width, and height of moving blockers, distance to the mmWave access point (AP), as well as the heights of the AP and the user device. The proposed model can be used for system-level characterization of mmWave cellular communication systems. For example, the optimal height and the maximum coverage radius of the mmWave APs are derived, while satisfying the required mean data rate constraint. The system-level simulations corroborate that the use of the proposed method considerably reduces the modeling complexity. [ABSTRACT FROM PUBLISHER]