Search

We have demonstrated the inverter operation of stacked-structure CMOS devices using pentacene and ZnO as active layers. The fabrication process of the device is as follows: A top-gate-type ZnO thin-film transistor (TFT), working as an n-channel transistor, was formed on a glass substrate. Then, a bottom-gate-type pentacene TFT, as a p-channel transistor, was fabricated on top of the ZnO TFT while sharing a common gate electrode. For both TFTs, solution-processed silicone-resin layers were used as gate dielectrics. The stacked-structure CMOS has several advantages, for example, easy patterning of active material, compact device area per stage and short interconnection length, as compared with the planar configuration in a conventional CMOS circuit.

Organic static induction transistor (OSIT) is a promising driving device for the displays, since it shows high-speed, high-power and low-voltage operation. In this study, the OSIT with fine gate electrode patterned by electron beam exposure were fabricated. We investigated the basic electrical characteristics of copper phthalocyanine OSIT and compared with the calculation results obtained by two-dimensional (2D) device simulator. The experimental results show that the gate modulation improved by reducing the electrode gap and on/off current ratio depends on the gate gap.

The control of the organic field-effect transistor characteristics is necessary to produce the integrated circuits using organic semiconductors. Variations in the poly (3-hexylthiophene) field-effect transistor characteristics upon post-treatment such as thermal treatment and voltage treatment in N 2 atmosphere have been investigated. The controllability and reproducibility of the threshold voltage and mobility were achieved as a result of the post-treatments.

We fabricated both thin film transistors (TFTs) and diodes using zinc oxide (ZnO) and pentacene, and investigated their basic characteristics. We found that field-effect mobility is influenced by the interface state between the semiconductor and dielectric layers. Furthermore, the complementary metal oxide semiconductor (CMOS) inverter using a p-channel pentacene field-effect transistor (FET) and an n-channel ZnO FET showed a relatively high voltage gain (8 - 12) by optimizing the device structure. The hybrid complementary inverters described here are expected for application in flexible displays, radio frequency identification cards (RFID) tags, and others.

A well-defined test structure of organic static-induction transistor (SIT) having regularly sized nano-apertures in the gate electrode has been fabricated by colloidal lithography using 130-nm-diameter polystyrene spheres as shadow masks during vacuum deposition. Transistor characteristics of individual nano-apertures, namely 'nano-SIT,' have been measured using a conductive atomic-force-microscope (AFM) probe as a movable source electrode. Position of the source electrode is found to be more important to increase current on/off ratio than the distance between source and gate electrodes. Experimentally obtained maximum on/off ratio was 710 (at V DS = -4V, V GS = 0 and 2V) when a source electrode was fixed at the edge of gate aperture. The characteristics have been then analyzed using semiconductor device simulation by employing a strongly non-linear carrier mobility model in the CuPc layer. From device simulation, source current is found to be modulated not only by a saddle point potential in the gate aperture area but also by a pinch-off effect near the source electrode. According to the obtained results, a modified structure of organic SIT and an adequate acceptor concentration is proposed. On/off ratio of the modified organic SIT is expected to be ∼100 times larger than that of a conventional one.

Organic static induction transistors (OSITs) with vertical structure have advantage of lower operational voltage compared to the organic field effect transistors with conventional lateral structure. In this study, OSITs based on pentacene films were applied to fabricate the organic inverters which can operate at low voltage. The experimental results demonstrate that organic inverters based on the OSITs show basic transfer characteristics and a low operational voltage of ±2 V.