Search

This paper addresses the resource allocation (RA) for ultra‐dense network (UDN), where base stations (BSs) are densely deployed to meet the demands of future wireless communications. However, the design of RA in UDN is challenging, as the RA problem is non‐convex and NP‐hard. Therefore, this paper considers and studies a semi‐distributed resource block (RB) allocation scheme, in order to achieve a well‐balanced trade‐off between performance and complexity. In the context of semi‐distributed RB allocation scheme, the problem can be decomposed into the subproblem of clustering and the subproblem of cluster‐based RB allocation. We first improve the K‐means clustering algorithm by employing the Gaussian modified method, which can significantly decrease the number of iterations for carrying out the K‐means algorithm as well as the failure possibility of clustering. Then, bat algorithm (BA) is introduced to attack the problem of cluster‐based RB allocation. In order to make the original BA applicable to the problem of RB allocation, chaotic sequences are adopted to discretize the initial position of the bats, and simultaneously increase the population diversity of the bats. Furthermore, in order to speed up the convergence of BA, the logarithmic decreasing inertia weight is employed for improving the original BA. Our studies and performance results show that the proposed approaches are capable of achieving a desirable trade‐off between the performance and the implementation complexity. [ABSTRACT FROM AUTHOR]

The use of selective partial updating method for reducing computational complexity of adaptive algorithms has been proposed recently. However, its performance analysis has not been studied as extensively and exactly as LMS or RLS algorithms for time‐varying channel estimation. This paper provides performance analysis of the low‐complexity family of affine projection algorithms based on selective partial update method on the estimation of multipath Rayleigh fading channels in the presence of carrier frequency offsets (CFO) and random channel variations. The analysis is based on the calculation of the error correlation matrix of the estimation, the mean‐square weight error (MSWE) and the mean‐square estimation error (MSE) parameters. The analysis does not use strong assumptions like small or large step‐size, and explicit closed‐form expressions for the MSE of estimation are obtained only from common hypotheses in wireless communication context. In this paper, the optimum step‐size parameters minimizing the MSE of estimation are analytically derived without any simplifying assumptions. For the sake of comparison with other analytical approaches, the performance of the introduced algorithms is also investigated using the energy conservation relation. Likewise, for exact performance analysis, all the moment terms that appear in closed form expressions for the MSE of estimation are evaluated. Simulations are conduced to corroborate the presented studies and show that the theoretical results agree well with the simulation results over non‐stationary multipath Rayleigh fading channels. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicles (UAVs) are widely considered as key enablers for future wireless networks due to their advantages, such as high mobility and flexible deployment. In this paper, the UAV assisted secure communication system is investigated, where the UAV is deployed as the mobile jammer to prevent the eavesdropper from overhearing the confidential message. With the objective of maximizing the secrecy rate, a joint optimization problem involving the trajectory and transmit power of UAV, as well as the transmit power of source node is formulated. Moreover, the effects of Non‐Fly Zone (NFZ) and imperfect estimation on the location of eavesdropper are also taken into consideration. As the original problem is hardly trackable, the worst case secrecy rate (WCSR) assumption is first employed to bypass the uncertainty brought by the estimation error. Then a block coordinate descent (BCD) based algorithm is proposed to decompose the problem into three sub‐ones, where the trajectory of UAV, the transmit power of UAV and the transmit power of source can be obtained in an iterative manner. Simulation results reveal that the proposed algorithm can improve the secrecy performance significantly. In addition, the robustness of the proposed algorithm under the estimation error can also be verified. [ABSTRACT FROM AUTHOR]

Sorted QR decomposition (SQRD) has been extensively adopted for various multiple‐input‐multiple‐output (MIMO) detectors, in which the sorting process incurs severe latency when it comes to larger‐scale MIMO situations. This paper proposes a group‐SQRD (GSQRD) algorithm to alleviate the latency problem of general SQRD architectures for larger‐scale MIMO systems. Via predictively sorting a group of 4 columns at one stage, the GSQRD could eliminate the processing latency by 41% for decomposing 16×16 complex‐valued matrices. Additionally, this percentage even rises up to 68% for decomposing 128×128 matrices. To analyse the side effects, the GSQRD is applied in various MIMO detectors in a simulation link, which exhibits a negligible performance degradation for MIMO detection. Moreover, GSQRD is a hardware‐friendly algorithm because the division and square root operations in GSQRD are converted to multiplications for simplifying the hardware implementation. Based on this algorithm, two corresponding hardware architectures, which contains 2 and 4 columns respectively in a sorting group, are also implemented with 65‐nm CMOS technology. These architectures can work at 513 MHz to decompose 16×16 complex‐valued matrices. The processing latencies are respectively 0.32 and 0.26 μs, superior to the state‐of‐art designs. [ABSTRACT FROM AUTHOR]

Indoor human wireless sensing is crucial for many applications such as smart homes and security monitoring. It needs to understand both the number of people and their activities, which is often difficult, especially in large spaces. This paper proposes a combined people number counting and action recognition method by using the channel state information (CSI) of Wi‐Fi signal, which aims to simultaneously estimate the number of people and their actions in wireless sensing applications. First, a jump region removal algorithm is developed to calibrate the phase difference. Second, a cumulative sliding variance algorithm is designed for the detection of moving targets in the environment. Then a multi‐dimensional feature is formed by the amplitude, frequency domain, and phase difference of CSI, and based on it, a two‐level classifier based on the SVM algorithm is used to estimate the number of people and their actions. Experimental results show that the average accuracy of the system for the people counting is 93.5%, and the activity recognition rate of one‐person and two‐person is 99.6% and 94.6% respectively. [ABSTRACT FROM AUTHOR]

Today, a directional sensor network is a popular environment for solving the target coverage problem. Monitoring all targets in a DSN is a crucial challenge to scholars working in this field of study. Adjusting the angle and range of the sensors can be an efficient technique for improving the network performance. In this way, the network has the most extended lifespan and, at the same time, spends the least time to find the best cover set. In this method, each sensor dynamically adjusts its own sensing angle in order to find the targets by choosing the best range. The present study proposed a continuous learning automata‐based method to choose the optimum sensing angle for the sensors in a DSN. Then, to evaluate the proposed algorithm performance, its results were compared to those of a conventional automata‐based method whose algorithm worked based on continuous automata. The comparative analysis confirmed the superiority of the proposed method over the conventional automata‐based method regarding the extension of the network lifespan. [ABSTRACT FROM AUTHOR]