Search

The two‐dimensional (2D) analytical model for the calculation of the components of the flux density distribution in the air gap in a dual‐stator axial‐field flux‐switching permanent magnet (PM) motor (DSAFFSPM) is presented. The novelties of this study are deriving a 2D hybrid analytical model and replacing the rotor teeth with some surface currents for the calculation of air‐gap magnetic flux density for the first time in the DSAFFSPM motor. The 2D analytical model for DSAFFSPMs is more challenging due to the doubly salient structure and inner PM of the stator. 1D analytical interior PMs are first transferred to the bore of the stator body using the magnetic equivalent circuit model (MEC). Next, the effects of the rotor teeth are taken into consideration by injecting virtual surface currents for 2D analytical model. Applying boundary conditions and solving the Laplace/Poisson equations, the vertical and tangential flux components of the flux density distribution in the air‐gap DSAFFSPM motor are computed. The verification of the proposed method and the obtained results are validated by the 3D finite element method. [ABSTRACT FROM AUTHOR]

A new analytic model for calculating of the air‐gap flux density (AGFD) of surface‐mounted permanent magnet synchronous machines (SMPMSMs) is presented. This proposed model is capable to taking into account the effects of magnetic saturation, armature reaction and stator slots opening. Furthermore, the real form of air‐gap distribution and spatial distribution of flux density of the PM poles are considered. The armature reaction effect is modeled using phasor diagram analysis of the motor as a function of the load torque, the armature current amplitude, power factor and the inverse air gap length. Also, saturation phenomenon predicted using the new non‐linear proposed function in connection with the armature reaction effects and the properties of the lamination material. It is shown that the proposed model capable to predicting acceptably the air gap flux density waveform of the SMPMSMs at lagging and leading power factors and with the load torque variation. The presented analytical approach is verified by the two‐dimensional finite‐element analysis (FEA) results. [ABSTRACT FROM AUTHOR]

The aim of this article is to develop a rotor reconstruction method for the V‐shaped interior permanent magnet (IPM) machine so that the subdomain method to analytically calculate the air‐gap flux density can be applied. With the proposed method, the V‐shaped IPM rotor with rectangular magnets, magnetic barriers, and saturated iron bridges can be transformed into a U‐shaped equivalent analytical model. The geometry and material parameters of the magnets in the equivalent U‐shaped model can be determined according to the flux equivalence in the air‐gap of the motor. Then using the subdomain method on the U‐shaped equivalent rotor, the static magnetic field problem can be solved and the flux density distribution in the air‐gap be obtained. The validity of this method and accuracy of the solution is verified by the finite element method with case studies. Compared with existing methods, the improved subdomain method has higher accuracy in calculating flux density including radial and tangential components. The presented rotor reconstruction method is not only limited to single‐layer V‐shaped rotor, it can also be applied to other IPM rotors with more complex structures. It is valuable in the design, optimisation of IPM motors, and even development of new rotor topology. [ABSTRACT FROM AUTHOR]

Here, the authors propose two new Permanent Magnet (PM) embedded linear switched reluctance motors; one is a modular linear hybrid reluctance motor (MLHRM), and the other one is a segmental linear hybrid reluctance motor (SLHRM). Both structures employ PMs between the side teeth of the modules/segments. The main contribution of the PMs is to increase the air‐gap flux density, which results in an enhanced thrust, and decrease the magnetic saturation in iron parts. The magnetic equivalent circuit model is used to demonstrate the positive effect of inserting PMs in the MLHRM and SLHRM compared to their PMless counterparts. The optimal pole number and design procedure are illustrated. The simulation results are obtained in terms of static thrust, flux linkage, flux density distributions, and steady‐state current and thrust. The results show that the proposed MLHRM and SLHRM offer a higher thrust and lower current compared to their PMless form. Also, the PMs decrease the root mean square (RMS) current under the steady‐state performance of the motors, in which a higher thrust is produced with a lower RMS current. Finally, the MLHRM and SLHRM are fabricated and the test results are obtained and compared with the simulations, which illustrate a satisfactory agreement. [ABSTRACT FROM AUTHOR]

This study elaborates upon a new modular split‐tooth permanent magnet‐assisted switched reluctance motor (MSTPM‐SRM). In the proposed topology, the stator comprises six modular E‐cores in which the middle poles are split into two teeth. Two permanent magnets (PMs) are placed between each module's middle and side poles. Primarily, the proposed topology is introduced. Next, the principle of operation of the proposed topology are elucidated, and the magnetic equivalent circuit analysis is adopted in order to validate the operational basics. It is proved that the embedded PMs significantly increase the air‐gap's flux density and adjusts the poles' flux density. The flux density distributions, static, and steady‐state characteristics of the proposed MSTPM‐SRM motor and its PMless counterpart are extracted by utilising 2‐D finite element analysis. It is illustrated that the average torque of the proposed MSTPM‐SRM is dramatically increased compared to its PMless counterpart, especially at high excitation currents. Furthermore, the cogging torque analysis is done and it is shown that the proposed structure has approximately zero cogging torque. Finally, a prototyping version of the proposed motor is fabricated, and the experimental results are elicited. It is shown that the experimental results endorse the simulation results. [ABSTRACT FROM AUTHOR]

To investigate the effect of initial dynamic eccentricity on the rotor winding turn‐to‐turn short circuit (RWISC) in a large synchronous condenser, this paper uses the study object of a 300 MVar dual water intercooler condenser. Firstly, the air gap flux density characteristics, unbalanced magnetic pull (UMP) and stator circulating current of the condenser under single and compound faults are derived theoretically. Then, a phase‐modulated field‐circuit coupling model is constructed using Anosoft software. It is used to simulate and analyse the condenser. Finally, the operation of the condenser was simulated with the SDF‐9 experimental setup, and the correctness of the theoretical derivation and simulation analysis was verified. The results show that the initial dynamic eccentricity of the condenser has a cutting effect on the fault characteristics generated by the RWISC. The 2nd harmonic of air gap flux density and stator circulating current and the fundamental wave of UMP decrease and increase with eccentricity. This study can provide theoretical guidance to eliminate disturbing factors to improve the accuracy of RWISC diagnosis in large synchronous condensers. [ABSTRACT FROM AUTHOR]

A Halbach permanent magnet (PM) tubular linear voice coil motor (LVCM) with a semi-closed structure is developed to enhance the thrust density in this study. Generally, the end of conventional LVCM is open and suffers from the considerable end reluctance. The usage of Halbach array in LVCM makes this problem more prominent although it improves the air-gap flux density greatly. The flux at the end of LVCM can be guided to improve the air-gap flux density. Therefore, this study aims to constrain and direct the magnetic field at the end of a Halbach PM LVCM by using a ferromagnetic auxiliary yoke to construct a semi-closed structure. Magnetic equivalent circuit method is utilised to analyse the effect of the auxiliary yoke on air-gap flux density. Besides, finite element analysis is used to analyse the magnetic circuit and design the parameters of LVCM. The semiclosed tubular LVCM topology is manufactured and the effectiveness of this topology is validated by experimental measurements. Results show that the thrust density of LVCM is improved effectively by using an auxiliary yoke at the end. [ABSTRACT FROM AUTHOR]

An analytical technique for predicting and optimising the open-circuit magnetic field in brushless surface-mounted permanent magnet (PM) machines with novel two-segment Halbach array has been presented. For the maximum fundamental air-gap flux density, the optimal magnetisation angle has been analytically derived. The effect of the rotor core on the fundamental air-gap flux density in the machine has been investigated. In addition, the proposed analytical technique can also predict the induced back-electromotive force and the electromagnetic torque. The analytical results show that the electromagnetic performance can be significantly improved for the proposed two-segment Halbach array compared with the conventional two-segment Halbach array. Predicted results have been validated by the finite-element analyses for 9-slot/8-pole slotless/slotted brushless PM machines. [ABSTRACT FROM AUTHOR]