Search

A double‐stator swing rotating permanent magnet spherical motor (SR‐PMSM) is designed, which can realize rotation, swing and spiral motion, and is used in the multi‐degree‐of‐freedom motion fields of industrial robot joints, torque gyroscopes, panoramic photography tables and so on. The inner surface of the rotor of the motor is attached with cylindrical PM poles, and the outer surface is attached with trapezoidal PM poles. Cylindrical and trapezoidal PM poles are simple to manufacture, but the magnetic field model of a spherical motor with two kinds of PM poles is complex. Therefore, a magnetic field modelling method combining the geometric equivalence principle and analytical method is proposed. Using the method of shape approximation, according to the principle of equivalence, the key parameters of cylindrical PM poles and trapezoidal PM poles are replaced by the parameters of approximate dihedral PM poles in a spherical coordinate. Select the most suitable dihedral PM poles, establish the analytical model of the magnetic field in the spherical coordinate system and verify the analytical results by FEM method. A SR‐PMSM motor with 6/4 pole (swing) and 12/10 pole (rotation) structure was assembled, and the experimental device was set up. The experimental results show that the experimental curve, analytical curve and FEM curve are in good agreement, which proves the accuracy of the equivalent model and is suitable for the magnetic field model of cylindrical and trapezoidal PM poles of the spherical motor. The research results of magnetic field lay a foundation for further analysis of the stator–rotor composite magnetic field considering cogging effect and edge effect, and analysis of load characteristics of the motor. [ABSTRACT FROM AUTHOR]

A new type of double‐stator permanent magnet spherical motor (DSSRPMSM) is proposed. Compared with most existing spherical motors, this motor uses a large number of stator iron cores, which can generate larger magnetic flux density and significantly improve torque capacity. The proposed DSSRPMSM can continuously rotate, swing and spiral, and can be used in the multi‐degree‐of‐freedom motion fields of industrial robot joints, moment gyroscopes, panoramic photography tables and so on. Because the motor has the dual characteristics of rotary motor and arc linear motor, the comprehensive effects of stator slotting and stator iron core breaking should be considered. Cylindrical and trapezoidal PM poles are equivalent to dihedral PM poles, and stator coils are equivalent to PM pole models. Analytical models of PM pole magnetic field and stator magnetic field in a spherical coordinate system are established, and the air gap magnetic flux density under unequal magnetic potential boundary conditions is calculated by conformal transformation. The analytical calculation method proposed is consistent with the results of finite element method (FEM) simulation, and the experimental test further verifies the effectiveness and accuracy of this method. [ABSTRACT FROM AUTHOR]

In this study, an unsymmetrical bistable multi‐magnetic circuit permanent magnetic actuator is proposed. The operating principle and mathematical model of the high‐voltage circuit breaker with the proposed machine are analysed. Additionally, the static and dynamic characteristics of the high‐voltage circuit breaker with the presented machine are investigated and evaluated using numerical finite element analysis methods. Furthermore, the influence of the length of the middle gap and the additional coil in the proposed machine are studied. The advantages of the presented machine, such as less magnet volume, low cost, high force density, and short starting time, are discussed. Finally, a prototype is created and tested, followed by the retrieval of the characteristic curves of the holding force to confirm the proposed design. [ABSTRACT FROM AUTHOR]