Search

The mainstream researches focus on the linearised impedance/admittance model and its related coupling effects or stability problems. However, since various non‐linear components exist in control loops, their non‐linear dynamics shall be described to improve the modelling accuracy. To fill in this gap, this study develops a large‐signal impedance/admittance model (LSIM/LSAM) to describe the dominant non‐linearity of modulation saturation in a grid‐connected voltage‐source converter (VSC). The LSAM represents the non‐linearity with the equivalent saturation gains based on the describing function theory and then incorporates the derived gains into conventional small‐signal AM (SSAM) to obtain a partially non‐linear admittance. The proposed LSAM distinguishes itself from SSAM by reflecting the improvement in the magnitude‐ and phase‐response of admittance during non‐linear oscillations. Case studies on a grid‐connected VSC containing saturation non‐linearity are conducted to validate the model's effectiveness in stability analysis. It is found that the frequency deviation and sustained oscillation caused by non‐linearity, which can hardly be assessed using SSAM, can be well captured by LSAM. The results of parameter analysis verify that the modulation saturation dominates the system non‐linearity. [ABSTRACT FROM AUTHOR]

Under certain conditions, grid‐connected voltage source converter (VSC) may result in electromagnetic oscillations. Many coupling components with different frequencies could be observed in converter outputs when oscillation happens. The characteristics and mechanism of frequency coupling phenomenon in oscillations of VSC are studied. The magnitude relationship between first‐order components in the three‐phase domain is drawn by impedance model. The two first‐order components will result in higher‐order components due to the non‐linearity of VSC controller. There are mainly three coupling paths in a controller: phase‐locked loop, DC voltage fluctuation and overmodulation. The coupling mechanism and frequency distribution characteristics are investigated in this study. Theoretical results are validated by simulations with PSCAD/EMTDC. [ABSTRACT FROM AUTHOR]

Short‐term voltage stability (STVS) issue poses a significant threat to receiving‐end power systems with high penetration of induction motors. To improve STVS of a receiving‐end system in a limited geographic area, this study proposes a local‐area STVS control system (LVCS). LVCS consists of phasor measurement units (PMUs), a local‐area centralised controller (LCC), generator‐level actuators (GLAs) and high‐speed communication networks. The PMUs or GLAs are pre‐deployed according to the observability or controllability of STVS. LCC receives and processes voltage measurements from PMUs to generate supplementary excitation control signals (SECSs). The SECSs are next forwarded to and executed by GLAs. Simulation studies on a practical receiving‐end system in China Southern Power Grid demonstrate that: once the target system suffers a serious fault, LVCS can 'feel' the voltage sag at critical buses and enforce the excitation control of generators to inject more dynamic var into the receiving‐end system. As a result, the increasing var demand is met locally and STVS can be improved considerably. Time delay caused by synchrophasor transmission has also been considered in the design of LVCS to make it feasible in practice. Thus, the proposed LVCS offers a new and effective solution to the STVS problem. [ABSTRACT FROM AUTHOR]

Numerical oscillation is a fatal problem caused by the trapezoidal (TR) algorithm in nodal analysis‐based electromagnetic transient (EMT) programmes. Traditional techniques of suppressing numerical oscillation involve switching among different algorithms or adding damping elements, which would undermine the flexibility and accuracy of the overall algorithm. In this study, a new algorithm based on rational‐fraction approximations to exponential functions is proposed to address the issue. Furthermore, it is combined with TR algorithm to form a hybrid method (HM) for EMT simulation. Analytical as well as numerical analyses have been conducted to compare the HM with other popular methods in terms of stability, accuracy and efficiency. The results from either theoretical analysis or case studies on an RLC circuit and a practical power system have concluded that the proposed HM gains advantages over classical methods in suppressing numerical oscillation without sacrificing accuracy and efficiency. [ABSTRACT FROM AUTHOR]

Practical subsynchronous instability events have been observed in doubly fed induction generator‐based wind farms, which are radially connected to fixed series compensated transmission lines. As a special type of subsynchronous resonance, this phenomenon is described here as subsynchronous control interaction (SSCI). This study proposes a centralised SSCI mitigation scheme named as subsynchronous damper (SSD). In this scheme, an additional high‐power electronic voltage‐sourced converter is added to the collection bus of wind farms. It is designed to dissipate the electrical resonance power of SSCI. Thus, SSD provides positive damping for SSCI. Its basic principle is explained with equivalent electric circuit and the sufficient conditions for stabilisation are obtained mathematically. Controller design guidelines are given and have been verified first by eigenvalue analysis. Then a method to choose the capacity of power electronic converter is proposed. The effectiveness of SSD is finally demonstrated by extensive time‐domain simulations on a target system. [ABSTRACT FROM AUTHOR]