Search

An electrically small antenna ensures easy integration with devices without compromising the form factor. The performance in terms of bandwidth, gain and so on for these antennas is extremely critical and is governed by fundamental limitations in size, i.e. Chu's limit. This study initially presents an analysis of these limits and corresponding performance parameters. Next, a compact dual-band antenna has been designed using an electric field driven LC (ELC) resonator and a coplanar ground plane which operates at GSM 1800 and Wi-MAX. This proposed antenna has a compact size of 0.31λ0 × 0.08λ0 × 0.01λ0 in the first band which is resonant at 1.89 GHz. Finally, a conducting layer is placed below the ELC resonator and both are connected through a via. This provides stronger capacitive coupling between the radiator and the feeding arm and thus, results in miniaturisation of 76.9% in the area. The new antenna is electrically small and covers various cellular bands such as GSM 900, Bluetooth, Wi-Fi and Wi-MAX. Prototypes of both designs have been fabricated and experimentally tested in order to validate the simulation results. [ABSTRACT FROM AUTHOR]

This study introduces a compact asymmetric coplanar strip (ACS)-fed composite right--left-handed (CRLH) multipleinput--multiple-output (MIMO) antenna for multiband operation. The ACS fed MIMO antenna is composed of two elements; each is operating at 5, 5.8 and 6.3 GHz; for different wireless applications. The overall MIMO antenna size is compact (46 x 26 mm²). A unit cell of the CRLH connected to 50 Ω ACS fed is considered the main block of the antenna. The edge-to-edge separation between antenna elements equals 0.4λ0 at 5 GHz. The insertion loss, correlation coefficient, diversity gain and channel capacity are used to evaluate the performance of the ACS-fed MIMO antenna. The isolation higher than 25 dB and envelope correlation lower than 0.05 have been achieved without using any extra decoupling structures. The experimental results are reasonably well agreed with simulated ones. [ABSTRACT FROM AUTHOR]

This study presents a hybrid electromagnetic isolation mechanism in a transceiver array antenna operating at 5.8 GHz. Maximum isolation between transmitting and receiving array antennas, at a very close spacing (3 mm = 0.0580), and minimum mutual coupling between each array elements is achieved without antenna radiation pattern degradation. The achieved separation is equivalent to 44% size reduction compared with conventional half wavelength spacing criterion. Each of the transmitting and receiving array antennas is a four-element linear microstrip patch array antenna. The employed hybrid isolation technique is composed of defected ground structure, to minimise coupling between array elements, and uniplanar electromagnetic bandgap, to minimise the coupling between the transmitting and receiving antennas. The resulting transceiver array antenna system fulfils -35 dB mutual coupling between array elements, and 60 dB isolation between opponent transmitting and receiving array antennas. The proposed design procedures are discussed and analysed using electromagnetic full wave simulations. Results were verified through experimental measurements for reflection coefficient, mutual coupling and radiation characteristics in which a good agreement with simulated results is granted. [ABSTRACT FROM AUTHOR]

The theoretical study and experimental results of a compact tunable left-handed (LH) zeroth order metamaterial ferrite resonator is presented. The resonator has been designed and realised using a LH coplanar waveguide transmission line on a ferrite substrate. The theoretical analysis of the operation principles of the resonator has been provided. The detailed measurement setup and experimental results are discussed. The resonator is only 0.19 λg (65% reduced in size comparing with conventional one) at 4 GHz. The resonator has fractional bandwidth of 0.1% and average insertion loss, approximately 4.5 dB. Moreover, the zeroth order metamaterial ferrite resonator has tuning capability and requires lower DC magnetic bias. [ABSTRACT FROM AUTHOR]

This study presents the design of switching techniques for dual-notched ultra-wideband antenna. The dual bandnotched frequencies are achieved by using switched defected microstrip structure band stop filter inserted in the microstrip feed line and a switched meandered slot etched in the radiation patch. The switching reconfiguration is accomplished by combining the two ideal switches to introduce a notch filter response to prevent the interference to the primary users operating in the middle and upper WiMAX wireless local area network bands. The proposed structure has four modes by controlling the two switches on and off. The proposed antenna has good matched impedance from 2.5 to 12 GHz with two notched bands from 3.3 to 3.8 GHz (middle WiMAX applications) and from 5.1 to 5.9 GHz (upper WiMAX applications). The antenna is fabricated and tested. Good agreement is achieved between the simulated and measured results. [ABSTRACT FROM AUTHOR]

In this study, the authors present a novel compact non-reciprocal ferrite forward composite right-/left-handed (CRLH) coupled-line coupler (CLC). The proposed forward coupler is realised in coplanar waveguide configuration using series air gap capacitors and shunt planar segment inductors. A theoretical coupled mode analysis of a general non-ferrite CRLH forward CLC has been proposed. The mode analysis is then extended to ferrite CRLH forward CLC. The ferrite coupler's performance has been further analysed numerically and verified experimentally. Both numerical and experimental results have shown that the coupler demonstrates non-reciprocal operation for both forward coupling and through propagations. The coupler can achieve ~10 dB forward coupling and through levels with nonreciprocity isolation up to 30 dB. Moreover, the coupler has high backward coupling isolation better than 20 dB and very compact size with coupling length = 0.08 λ0 or (0.2 λg) at 8 GHz which is significantly smaller compared with any forward coupler reported to date in the similar operating frequency bands. Although, a conventional ferrite forward CLC can be non-reciprocal, it has long length, resulting in very high losses. This is not the case for the proposed CRLH coupler. Hence, the novelty and advantage of the coupler are its combined properties in compactness and nonreciprocity. Furthermore, the coupler requires very low external DC magnetic bias because of its much lower demagnetisation compared with the microstrip configuration. [ABSTRACT FROM AUTHOR]

This study presents, for the first time, a novel π - T generalised negative refractive index (NRI) transmission line (TL) configuration. It is innovated for increasing the possible passbands in designing microwave components. It is proved that the proposed transmission line can introduce up to seven passbands for completely unbalanced transmission line condition. The detailed mathematical analysis of that configuration based on the periodic network analysis and equivalent circuit model is introduced. As an application for the novel π - T generalised NRI TL configuration, a new compact triple band coplanar waveguide (CPW) metamaterial filter is introduced. The proposed triple bands CPW filter design steps are introduced and its performance is validated using equivalent circuit model simulation, electromagnetic full wave simulation and experimental measurements. Good agreements between the circuit modelling, electromagnetic full wave simulation and practical measurement results are achieved. All the results confirm that the proposed filter has triple passbands from 900 to 960 MHz, 1.4 to 1.48 GHz and 2.4 to 2.45 GHz. Moreover the filter size is compact whose length is only 12.1% λg at first passbands, 18.2 λg% at second passbands and 31.7 λg% at third passbands. [ABSTRACT FROM AUTHOR]