Search

Purpose This purpose of this study was to investigate the effects of carbon fiber (CF) and/or glass fiber (GF) fillers on the tribological behaviors of ultrahigh-molecular-weight polyethylene (UHMWPE) composites to develop a high-performance water-lubricated journal bearing material.Design/methodology/approach Tribological tests were conducted using a pin-on-disc tribometer using polished GCr15 steel pins against the UHMWPE composite discs under dry conditions with a contact pressure of 15 MPa and a sliding speed of 0.15 m/s. Scanning electron microscopy, laser 3D micro-imaging profile measurements and energy-dispersive X-ray spectrometry were used to analyze the morphologies and elemental distributions of the worn surfaces.Findings The results showed that hybrid CF and GF fillers effectively improved the wear resistance of the composites. The fiber fillers decreased the contact area, promoted transfer from the polymers and decreased the interlocking and plowing of material pairs, which contributed to the reduction of both the friction coefficient and the wear rate.Originality/value The UHMWPE composite containing 12.5 Wt.% CF and 12.5 Wt.% GF showed the best wear resistance of 2.61 × 10−5 mm3/(N·m) and the lower friction coefficient of 0.12 under heavy loading. In addition, the fillers changed the worn surface morphology and the wear mechanism of the composites. [ABSTRACT FROM AUTHOR]

Purpose Water lubrication is significant for its environmental friendliness. Composite journal bearing is liable to deform for the huge pressure of water film. This paper aims to study the influence of elastic deformation on how lubrication functions in water-lubricated journal bearings and to provide references for designing composite journal bearings.Design/methodology/approach The combination of computational fluid dynamics and fluid-structure interaction is adopted in this paper to study the lubrication performance of water-lubricated compliant journal bearings. The influences of elasticity modulus and Poisson’s ratio on load-carrying capacity and elastic deformation are studied for different rotational speeds. Predictions in this work are compared with the published experimental results, and the present work agrees well with the experimental results.Findings A reference whether elastic deformation should be considered for composite journal bearings is proposed under different working conditions. Besides, a reference to determine water-lubricated plain journal bearings dimensions under different loads and rotational speeds is developed with the effect of both elastic deformation and cavitation being accounted.Originality/value The present research provides references as to whether elastic deformation should be considered in operation and to determine compliant journal bearings’ dimensions in the design process. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to study the friction and wear properties of journal bearings under different working conditions. Design/methodology/approach: Friction coefficient and wear losses of journal bearing under different working conditions have been determined by a bearing test rig. The worn surfaces of bearing were examined by scanning electron microscopy and laser three-dimensional micro-imaging profile measurements, and the tribological behavior and wear mechanisms were investigated. Findings: The wear loss and friction coefficient of bearing under starting-stopping working condition is far greater than that of steady-state working conditions. In addition, the maximum wear loss under start-up and stop conditions is about 120 times of that under stable operating conditions. Under stable working conditions, the main wear forms of bearings are abrasive wear, under starting-stopping working conditions the main wear mechanisms of bearings are adhesion wear, abrasive wear and fatigue wear. Originality/value: These research results have certain practical value for understanding the tribology behavior of journal bearings under different working conditions. [ABSTRACT FROM AUTHOR]