Search

• A thulium-doped fiber laser with bidirectional single-longitudinal-mode output was proposed. • The proposed TDFL had a simple structure to realize bidirectional output, using only two 2 × 2 optical couplers. • A novel cascaded triple-ring cavity filter was proposed and investigated. The reversibility and the capability of mode selection filtering were investigated by simulation and experiment. • The minimum relative intensity noise was less than −130 dB/Hz at 2 ≥ 2 MHz around the 2-μm band. Single-longitudinal-mode (SLM) fiber lasers play important roles in optical fiber communication. However, there has been little reported research on bidirectional SLM output, especially in the 2-μm band. In the work reported here, a bidirectional SLM output thulium-doped fiber laser (TDFL) using a cascaded triple-ring cavity (CTRC) filter was proposed and investigated. To realize bidirectional output, the proposed TDFL had a simple structure, using only two 2 × 2 optical couplers. To realize SLM output, the transmission spectrum, as well as the reversibility of the CTRC filter were discussed and investigated in detail. The direction-switchable SLM output was realized by polarization-dependent loss. By tuning the polarization controller carefully, each direction could generate SLM output with an optical signal-to-noise ratio (OSNR) > 72 dB. The maximum wavelength and peak power fluctuation over 60 min were, respectively, 0.01 nm and 0.48 dB. The variation of output power with pump power, linewidth, relaxation oscillation, and relative intensity noise were also investigated. To the best of our knowledge, this is the first time that a sub-ring cavity filter has been used to realize bidirectional SLM output. [ABSTRACT FROM AUTHOR]