Search

The scope of this paper is to give an insight into one of the main deep-sea ports in the United Kingdom, the London Gateway, which is a part of the Thames Gateway project and to indicate how, through becoming more rail focussed, it is possible for both output and efficiency to increase. The aim of this study is ultimately to highlight how gradually shifting the reliance of moving freight to rail from road can enhance the overall throughput and output of a port, while also improving the nation’s overall carbon emissions. However, as the results from this simulation show, there is not always the option to solely rely upon rail freight, this is because an over dependency upon one form instead of the other can ultimately have detrimental consequences upon both throughput and output, as well as questions over whether the current rail infrastructure of the United Kingdom has the capacity and ability to handle longer freight trains. [ABSTRACT FROM AUTHOR]

This paper aims at establishing the most appropriate maximum cruising speed for a freight electric multiple unit (F-EMU), i.e., a concept of a new-generation freight train with distributed power, diagnosable and suitable to run also on high-speed lines. Different scenarios were simulated on the Turin-Verona (I) line, trying to achieve a service with five subsequent F-EMUs departing after the end of the passenger service and arriving before the scheduled night-time maintenance operations on the infrastructure. The scenarios considered the current signalling systems (SCMT and ERTMS level 2) and ETCS level 3 with train-platooning. It has been shown that, because of the limitations due to the tarpaulin guaranteed resistance of swap bodies loaded on the flat wagons, the most convenient speed for the design of these trains is 160 km/h, being the best compromise for line capacity and the efficiency of the service. Moreover, given the homotachic nature of the foreseen scenarios, train-platooning would be a viable solution for avoiding delays and pursuing a more reliable service. [ABSTRACT FROM AUTHOR]

This paper presents an in-depth investigation of the engineering aspects related to the design and operation of distributed-power freight trains (F-EMU, freight Electric Multiple Unit), and their potential advantages, by evaluating the various components of this new kind of train and comparing its performance with a traditional freight train. Electric motors, distributed along certain motorised carriages of connected wagons, allow, among others, the power necessary to avoid multiple locomotives, used on traditional lines for the heaviest trains, to be supplied, and access to high-speed lines, which were originally designed and constructed – in Italy for example – for mixed use (i.e. for passengers and freight). Interesting speed levels (140160 km/h) could be achieved, subject to the other requirements of the rolling stock, which are indicated later on in the paper. EMU trains are known to be used for passenger services, as they allow high speeds to be reached, energy to be recuperated during braking and, in general, increases in the performances of the rolling stock to be obtained. Analyses of the operation of freight trains have pointed out that distributed-power trains are able to reach appreciable acceleration values, during traction, because of a better distribution of the adhesive weight. High performances can be achieved, during the braking phase, when electro-dynamic braking, which allows energy to be recovered, is adopted together with a dominant electro-pneumatic braking system: this also prevents the infrastructure operator from having to lengthen the block sections to allow any poorly-braking 700-750 m long traditional trains to transit. The use of such innovative freight trains also satisfies the modern requirements of intermodal transport: electrification of the whole train makes it possible to transport units of refrigerated goods and perishable goods, and to conduct a constant monitoring of the load. After having examined the design and functional requirements of the F-EMU train and a traditional one, a comparison is made of the performances of a distributedpower freight train and a conventional one, on the TurinSavona railway line, through the use of a micro-simulating software package that is able to reproduce the railway operations along the considered stretch and saturate the current passenger timetable with freight trains. From the results, it has emerged that the adoption of distributed-power freight trains leads to a marked reduction of the travel times and an increase in the intermodal transport units (UTI) that can be transported over the reference time frame, especially when considering the use of 750 m long trains. [ABSTRACT FROM AUTHOR]

The so-called heavy freight trains (over 1600 t), sometimes even long (740-750 m), are now among the leaders of the future of rail transport of goods. The aim of this paper is to analyse, both theoretically and experimentally, the impact that this solution may have on the traction units (hooks with their traction castle or yoke) and the braking system. Concerning the traction units, the technical reference in Italy, no longer binding from 2021, is Tab. 20, art. 61, of the General Preface of the Timetable of Services (named PGOS) containing the correlations between the maximum towed mass and the plan-altimetric characteristics of the line (performance grade). This reference is questioned and compared with other foreign institutional sources and with analytical calculations referring to “quasistatic” conditions of the trainset, departing from a standstill, and again in “dynamic” conditions at high speeds. As far as the analysis in the braking phase is concerned, this was carried out by means of thermal evaluations on data collected from experimental observations compared with data available in the literature. Among the main results, considering a precautionary limit hook load of 400 kN, both in the quasi-static and dynamic conditions, it appears that the maximum load section or degree of performance on which a train of 2000 t can circulate is 15/16, corresponding approximately to an equivalent resistance deriving from the infrastructure (i.e. gradient and resistance in curves) of 15‰, without prejudice to the possibility of using thrust or booster locomotives at the rear, in compliance with the provisions of art. 60 of the mentioned PGOS. The thermal evaluations of the braking system confirmed that the maximum values reached are compatible with those in the literature and that the behaviour of the braking blocks is different according to their type. [ABSTRACT FROM AUTHOR]

The aim of the paper is to assess the actual capacity of the corridor lines in Slovakia in terms of the freight transport needs and EU transport policy objectives, based on the analysis of track capacity. The railway track sections of the north-south corridor on the ŽSR network are problematic from the point of view of limited capacity, especially at Štúrovo border station. Part of the research includes measures leading to an increase in the capacity of lines and stations for the needs of transit freight. These measures have to be assessed from an operational and economic point of view. [ABSTRACT FROM AUTHOR]

This paper aims about the historical and technical evolution of scientific thought in railway vehicle behaviour, while running on straight track and cornering. The point of view of many railway scientists and mechanical approaches are presented and joined to the operational reality, referring from the beginning of railway use, through the idealization in modelling, to be able study the problem of wheel-rail interface. [ABSTRACT FROM AUTHOR]