Search

• Femoral neck system, multiple cancellous screws, and dynamic hip screws are effective for femoral neck fractures. • Femoral neck system is a simpler operation, with earlier weight-bearing time, than multiple cancellous screws. • The main advantage of femoral neck system over dynamic hip screws is a minimally invasive operation. To compare the short-term outcomes of the femoral neck system (FNS) with multiple cancellous screws (MCS) and dynamic hip screws (DHS) in the treatment of femoral neck fractures. A retrospective analysis was performed on 157 patients with fresh femoral neck fractures treated with FNS (from September 2019 to October 2020), MCS, and DHS (from January 2018 to October 2020). According to internal fixation methods, all patients were divided into the FNS group (54 cases), MCS group (51 cases), and DHS group (52 cases). Demographic data were also collected, recorded, and compared, including the follow-up time, days of hospitalization, operation time, blood loss, intraoperative fluoroscopy times (IFT), weight-bearing time (WBT), length of femoral neck shortening (LFNS), Harris hip score, and complications (such as internal fixation failure, bone nonunion, and avascular necrosis of the femoral head) between the three groups. Overall, 157 patients with a mean age of 61.8 (range, 18–89) years were analyzed. In the FNS group, IFT (median 10.5) was significantly lower than that in the MCS group (median 21) and DHS group (median 20.5) (P <0.05), and WBT was significantly earlier than that of the MCS group (P <0.05). In the FNS group, the median hospitalization time, operation time, and blood loss were 2 (2, 4) days, 45 (40–59) min, and 30 (20, 50) ml, respectively. They were all significantly less than 3.5 (3, 6) days, 72 (55–88.75) min, and 50 (30, 50) ml in the DHS group, respectively (P < 0.05). There was no statistical difference in LFNS, quality of reduction, internal fixation failure rate, and Harris hip score at the latest follow-up (P >0.05). No surgical complications such as incision infection, deep infection, pulmonary embolism, or femoral head necrosis were found in any of the three groups. FNS, MCS, and DHS are all effective for femoral neck fractures. However, a lower IFT of FNS shortens the operation time. Compared to MCS, FNS has the advantages of being a simple operation, with early WBT; compared to DHS, a minimally invasive operation is the main advantage of FNS. [ABSTRACT FROM AUTHOR]

Background: Despite recent advances in implants and surgical techniques, catastrophic and clinical failures in the treatment of intertrochanteric fractures continue to occur, with dire consequences in an overall frail population subset. The aim of the current study is to evaluate the effect of the factors under the surgeons' control, namely fracture reduction and implant selection, on the biomechanical behavior of fracture fixation constructs.Material-methods: An experimental protocol was conducted with the use of instrumented sawbones, in order to validate the finite element models. The implants used were the Gamma3®and DHS systems. Subsequently, a series of scenaria were considered, including various reduction and implant angle combinations. Data were retrieved concerning the peak cancellous bone stresses around the hip screw and the volume of cancellous bone in the femoral head stressed at critical levels, as well as implant stresses and stresses on the cortical bone of the distal fragment.Results: All stable fracture models displayed significantly decreased cancellous bone stresses and implant stresses compared to their unstable counterparts, regardless of implant used. The effect of increasing implant angle led to a decrease in implant stresses in all models studied, but had a beneficial effect on the stresses in the cancellous bone of the proximal fragment only in the subgroups of stable fractures with both implants and unstable fractures treated with a cephalomedullary nail (CMN). In unstable fractures anatomically reduced, the use of CMN led to significantly lower peak stresses in the cancellous bone and a smaller volume of bone stressed at critical levels. Increasing the reduction angle by 5 ° led to a significant decrease in both peak stresses and volume of bone stressed at critical levels, more prominent in the sliding hip screw (SHS) models. Decreasing the reduction angle into varus by 5 or 10 ° led to a significant increase in bone and implant stresses regardless of implant used.Conclusions: In stable two-part (AO31.A2) fractures the use of the SHS appears to be biomechanically equivalent to CMN. In unstable, anatomically reduced fractures, the use of CMN leads to significantly reduced cancellous bone stresses and decreased rotation of the proximal fragment during loading. A reduction in varus should be avoided at all costs. In unstable fractures treated with SHS a reduction in slight valgus appears to be biomechanically beneficial. The highest implant angle that allows for proper screw position and trajectory in the femoral head should be used for stable fractures with both implants and unstable fractures treated with Gamma3®. [ABSTRACT FROM AUTHOR]

Introduction: Few studies have been performed to evaluate the association between technical surgical factors and patient outcomes following hip fracture surgery. We performed a retrospective cohort study of elderly patients who had undergone fixation of trochanteric hip fractures using a sliding hip screw (SHS), with the aim of establishing whether there was a correlation between quality of fracture reduction and mortality at 30 days and one year.Patients and Methods: A retrospective cohort study was designed. Inclusion criteria were trochanteric (AO 31A1 or 31A2) fractures in patients aged ≥ 65 years, presenting <3 days after injury and fixed using an SHS. Fracture reduction was classified using the Baumgaertner Reduction Quality Criteria (BRQC). A validated predictor of mortality following hip fracture was used to stratify for confounding variables that might affect mortality. Multivariate logistic regression was used to explore the association between fracture reduction and mortality.Results: 329 patients were identified (mean age 86, 27% male). 57% had a good reduction, 39% had a fair reduction and 4% had a poor reduction. As reduction grade deteriorated, predicted mortality increased (good reduction: 7.3%; fair reduction: 8.4%; poor reduction: 15.5%). Without adjustment for predicted mortality, there was a significant correlation between decreasing reduction grade and mortality at both time points (30-day: odds ratio 1.95, p = 0.049; one year: odds ratio 1.86, p = 0.003). When adjusted for predicted mortality, only one year mortality remained significant (30 day: odds ratio 1.61, p = 0.173; one year: odds ratio 1.62, p = 0.037).Conclusion: Some, but not all, of the association between fracture reduction and mortality can be explained by predetermined predictors of a poor outcome. There remains, however, a correlation between poor fracture reduction and mortality at one year. Every effort must be made to achieve an anatomical reduction for these injuries, and trainees must be instructed in methods to achieve this. [ABSTRACT FROM AUTHOR]

• Addition of an AS to the DHS are well-documented implants for VOFNFs. However, effects of the angle between DHS and AS in three-dimensional space on VOFNFs were rarely mentioned. • Our results provide evidence that the constructions with TA ≤ 10° in three-dimensional space between DHS and AS showed superior biomechanical performances and clinical results than those with TA > 10°. To analyze the effects of the angle between dynamic hip screw (DHS) and anti-rotation screw (AS) on vertically oriented femoral neck fractures (VOFNFs) and investigate the clinical results of them. Eighteen synthetic femurs were simulated and divided into 3 groups. The angle between DHS and AS in anteroposterior-view was marked as α, and in lateral-view was marked as β, thus the total angle (TA) was defined as the summation of α and β. The groups were categorized as group A (TA ≤ 5°), B (5° < TA ≤ 10°), and C (TA > 10°), respectively. All samples were tested under incremental, cyclical loading, and loading to failure. In clinic, 80 consecutive VOFNFs in 78 patients were treated with DHS plus AS. The patients were divided into 2 groups, including 48 fractures in parallel group (TA ≤10°) and 32 in angular group (TA >10°). Group A and B survived during incremental and cyclical loading and endured longer than group C. Axial stiffness and failure loads were not different between group A and B, and greater than group C. Fracture gaps compressive stress was highest in group A, followed by group B and C. Forty-one fractures in parallel group and 23 in angular group healed at final follow-up. Nonunion and osteonecrosis occurred in 3 and 4 of parallel group, and 4 and 5 of angular group. The construction with TA ≤10° between DHS and AS showed superior biomechanical performance and clinical results than those with TA >10°. [ABSTRACT FROM AUTHOR]

Vertical Pauwels Type III fractures of the neck of femur in young patients are difficult fractures to treat. These are usually as a result of high energy trauma which are associated with a significant degree of fracture comminution in the neck of femur. This makes the fracture reduction and fixation difficult. Many fixation methods and implants have been described for use in these fractures but are not without reported complications such as non-union and varus collapse. In this article, we highlight the incidence of fracture comminution in both the anterior and posterior cortices of the femoral neck, better visualised with axial computed tomography scanning and describe a simple technique utilizing lag screws and a DHS implant to adequately address these fractures. [ABSTRACT FROM AUTHOR]

Introduction: The intact lateral wall plays a key role in stabilization of trochanteric fracture. Hence extreme precaution should be taken to prevent lateral wall damage during DHS fixation. Present study is aimed at evaluating the determinants of lateral wall fracture and its effect on outcome in intertrochanteric fracture femur treated with DHS.Material and Methods: This is a prospective study involving intertrochanteric fractures treated with DHS fixation from July 2013 to June 2014. Out of 135 patients 49(36.3%) had stable fractures and 86(63.7%) unstable fractures. Cortical thickness index (CTI) was measured to evaluate osteoporosis. Lateral wall thickness in anteroposterior radiograph was also measured.All patients underwent 135° DHS fixation.Postoperative x-rays are assessed for implant position, intactness of the lateral wall, tip apex distance (TAD) and medialization. Functional outcome was measured at the end of fracture union by modified Harris hip score and Parkers mobility score. Clinical information including age, gender, fracture classification, TAD, lateral wall thickness and functional outcome of the patients were subjected to statistical analysis.Results: 34 (19.5%) patients had lateral wall fractures. Medialization was found in 22 out of these 34 (64.7%) patients. The mean preoperative lateral wall thickness of these patients is 19.2mm, compared with 26.8mm in patients with intact lateral wall (p<0.001). The mean values of CTI and TAD are comparable in both the groups. In patients with intact lateral wall, mean Harris hip score is 73.1 compared to 65.5 in lateral wall fracture group (p<0.001). Preinjury mobility status was achieved in 70.2% of intact lateral wall patients, whereas only 32.3% (11) achieved that in lateral wall fracture group. Threshold for lateral wall thickness that could predict lateral wall fracture was found to be 21mm with 95% sensitivity and 88.2% specificity.Conclusion: Lateral wall fractures during DHS fixation are not uncommon and osteoporosis has no bearing on its occurrence. It alone can lead to poor radiological and functional outcome independent of TAD. Lateral wall thickness is a reliable predictor of intra operative lateral wall fracture during DHS fixation and nailing is a good option especially when lateral wall thickness is <21mm. [ABSTRACT FROM AUTHOR]

Objective: Pauwels III femoral neck fractures are highly unstable. These fractures are commonly treated with three cannulated screws or sliding hip screw (SHS) implants, however high rates of non-union persist. A hybrid SHS construct has recently been proposed. The objective of the study was to compare this construct to the familiar inverted triad of cannulated screws and to a single SHS.Methods: Fourth generation biomechanical femur analogs were used to create a highly repeatable injury model. The hybrid SHS construct contained a SHS with two superior cannulated screws in an inverted triangle configuration. Eight samples for each construct were biomechanically evaluated and the results compared using ANOVA (p<0.05).Results: The cannulated triad and hybrid SHS provided similar stiffness and fracture gap motion. The single SHS exhibited significantly lower stiffness and larger fracture plane diastasis than either the inverted triangle of cannulated screws or hybrid SHS (p<0.05). None of the constructs exhibited catastrophic failure during cyclic loading nor under loading up to 2.5 times body weight.Conclusions: The single SHS provided the least stable fracture fixation, while the inverted triad and hybrid SHS constructs were mechanically similar. The fracture repair simulated here illustrates how these repairs have the potential to return near pre-fracture strength in ideal conditions with young, healthy bone. However; in clinical situations where comminution impairs load transfer through the cortices the hybrid SHS may be the most favorable option. [ABSTRACT FROM AUTHOR]

Introduction: Management of Pauwels type-3 vertical femoral neck fractures has been a challenging clinical problem as they experience high shear forces and thus a greater risk of treatment failure. There is no apparent consensus on the optimal implant type for these injuries. We developed a modified dynamic hip screw (DHS), which was designed to a cage in the lag screw, loaded with autologous bone graft for the treatment of Pauwels type-3 vertical femoral neck fractures.Methods: Between February 2010 and January 2012, 17 consecutive patients with Pauwels type-3 vertical femoral neck fractures were treated with the modified DHS loaded with autologous bone graft. All patients were followed up for a minimum of 24 months (range, 24-36 months). Surgical details, operative and postoperative complications, the rates of nonunion and osteonecrosis and the Harris hip score were evaluated.Results: There were thirteen men and four women with a mean age of 37.2 years (range, 27-52 years). There were no intraoperative complications related to this technology. All fractures healed within 14.1 weeks (range, 12 to 20 weeks). One patient required total hip replacement because of avascular necrosis of the femoral head at 27 months after surgery. According to the Harris hip score, eleven patients (64.7%) had excellent results, four (23.5%) had good results, one (5.9%) had moderate and one (5.9%) had poor result.Conclusions: The modified DHS loaded with autologous bone graft appears to be a reliable implant for the treatment of Pauwels type-3 vertical femoral neck fractures with fewer complications. [ABSTRACT FROM AUTHOR]

Background: Femoral neck fractures are the most common fractures among the elderly. The two operative approaches used for the treatment of AO/OTA 31 intertrochanteric fractures include an intramedullary device (proximal femoral nail [PFN]) or an extramedullary device (sliding/dynamic hip screw [DHS]). The aim of this study was to provide objective evidence of local soft tissue injury by measuring serum creatine phosphokinase (CPK), a biochemical marker, to quantify muscle damage and inflammation in patients treated by the two approaches.Patients and Methods: Medical data of 359 patients operated for intertrochanteric fractures with PFN (156 patients) or DHS (193 patients) were retrospectively reviewed. The fractures were classified according to AO/OTA classification. Perioperative and radiographic data were collected to ensure cohorts with similar characteristics. Serum CPK and serum hemoglobin (Hb) levels were measured preoperatively and on postoperative day 1 (POD1). Independent predictors of elevation in the levels of markers of inflammation and muscle damage were determined by a multivariate linear regression model.Results: The demographics were similar for the two groups. Our study population included 64.2% female patients. Preoperative serum CPK levels were available for 89 patients and POD1 serum CPK levels were available for all patients. One-hundred and thirteen of the 193 DHS patients (58%) and 14 of the 156 PFN patients (9%) had a stable fracture (AO/OTA 31A1, p<0.0001). The DHS patients had a greater increase between pre- and postoperative CPK levels compared to the PFN patients (DHS, δ=368 versus PFN, δ=65, p<0.0002). The PFN patients had a greater decrease in both the pre- and postoperative Hb levels compared to the DHS patients (Diff_Hb 0.27g/dl). The older the patient, the greater decreases in Diff_CPK compared to the younger ones.Conclusions: Implementation of POD1 CPK blood levels as a biochemical marker of soft tissue injury provided quantitative evidence that patients whose intertrochanteric fracture was stabilized by a DHS suffered greater soft tissue injury compared to patients whose fracture was stabilized by a PFN. [ABSTRACT FROM AUTHOR]

Background: Dynamic hip screw (DHS) is a common device for treating intertrochanteric fracture (ITF). Various risk factors have been reported to be associated with the operative treatment outcome. However, an integrated risk scoring prediction model is lacking. In this study, we aimed to develop a prediction model for treatment outcome of intertrochanteric fracture.Methods: We analyzed 442 AO/OTA 31-A1 and A2 fractures which were treated with DHS during the period January 2000 to June 2014 in a level I trauma center. Risk factors including age, gender, injured side, lag screw position, AO/OTA classification, tip-apex distance, postoperative lateral wall fracture, reduction patterns were analyzed to determine their influence on treatment outcome. Integrated risk scores of significant predictors were used to construct a prediction model.Results: AO/OTA 31-A2 classification, postoperative lateral wall fracture, posteriorly inserted lag screw and varus reduction pattern were significant risk predictors for DHS failure. The failure risk for low- and high-risk groups were significantly different (P<0.001) CONCLUSION: AO/OTA 31-A2 classification, postoperative lateral wall fracture, posteriorly inserted lag screw and varus reduction pattern were significant risk predictors for DHS failure. We developed a model that integrates these factors to predict the treatment outcome, which had excellent prediction accuracy and discriminatory ability. The models may provide useful information for orthopedic doctors to identify patients who need early intervention as well as ITF patients who require more frequent follow-up in the postoperative period. [ABSTRACT FROM AUTHOR]

Introduction: Information is lacking regarding incidence rates, treatment regimens, and outcomes concerning peri-implant femoral fractures (PIF). Therefore, we performed a retrospective study to provide scientific data concerning incidence and outcome of PIF following osteosynthesis of proximal femoral fractures (PFF).Material and Methods: We retrospectively included all patients who received osteosynthesis for PFF between 2006 and 2015 and in whom PIF was confirmed postoperatively. All available patients with PIF were contacted minimum one year post-surgery.Results: A total of 1314 osteosynthesis procedures were performed, of which 705 were proximal femoral nails (PFNs), 597 were dynamic hip screws (DHSs), and 12 were screws appliances only. During the same period, 18 PIFs (1.4%) were reported. However, PIF was 3.7 times higher within PFN when compared to DHS (15/705:2.1% versus 3/597:0.5%; odds ratio: 3.7). The following analysis also included 8 patients with PIF who were referred from other hospitals, resulting in a total of 26 patients. Mean patient age was 84.8 years (range, 57-95), with a predominance in female (23×) and in the left femur (19×). PIF occurred after an average of 23.6 months (range, 1-81) post-surgery. The fractures, most of which were spiral-shaped, were most commonly treated with locking plate osteosynthesis. The surgical revision rate was 7.7%, and the one-year mortality was 23.1%. At an average of 43.0 months (range, 12-100) post-surgery, it was possible to contact 18/26 patients (69.2%), and their mean Parker Mobility Score was 5.2 points (range 2-9).Conclusions: Peri-implant femoral fracture is a rare incident within the old age traumatology of PFF. However, based on our small number of cases, it occurred within PFN much more frequently compared with DHS. Locking plate osteosynthesis has been shown to be effective and reliable. Surgical revision and mortality rates do not appear to be increased when compared to those with the initial treatment of proximal femoral fractures. [ABSTRACT FROM AUTHOR]

Introduction: The Variable angle Martin Plate (MP) is designed to offer patient-specific adaption for the treatment of intertrochanteric hip fractures. Its proposed benefits include optimization of lag screw placement, plate shaft congruence and reduced risk of failure. Often its use has been criticized as representing a poor reduction of the fracture. The purpose of this study was to assess for a poorer quality of reduction, and compare functional outcomes and mortality, using a MP to that of a fixed angle Dynamic Hip Screw (DHS) in a matched cohort of patients.Methods: A retrospective review of a prospective fracture database system was undertaken between 1st January 2004 to 31st December 2013. MP patients were matched to a cohort of DHS patients. Outcomes measure were a quality of procedure score(QPS), 1-year mortality rates, reoperation rates, and Barthel Index functional outcome. Minimum follow up was 12 months.Results: A total of 77 Martin Plate patients were identified and case matched. The mean pre- and post-op Neck Shaft Angle (NSA) in the MPs was significantly different (132.97±7.78 Vs 126±8.62; p<0.0001). Conversely, the mean pre op DHS NSA and the mean post op NSA was not (p=0.397). Mean Tip-Apex Distance (TAD) was significantly different between groups; MP mean 26.51±9.09mm vs DHS 23.50±8.14mm (p=0.023). The QPS consisted of 4 variables. A significant inverse relationship between QPS and the incidence of construct related complications exists. TAD>25mm, and a change in AP NSA of >5°conveyed the greatest risk of complications. No difference occurred in complications, nor 12-month mortality.Conclusions: No statistical difference was found in the quality of reduction between MP and DHS in this group of matched patients. QPS demonstrated a significant inverse correlation with implant-related complications. No significant difference was noted in the incidence of complications, Barthel Index functional scores, or 12-month mortality between implants. A rationale exists regarding the use of MPs, particularly in patients with varus NSA. However, planning and adequate reduction are essential regardless of implant choice. [ABSTRACT FROM AUTHOR]

Background With the ageing of the population, intertrochanteric femoral fracture is associated with increased morbidity. There is continuing controversy over the best treatment for the injury, and the choice of internal fixation method has been a focus of dispute. The purpose of this study was to evaluate the results of these fractures being treated with the percutaneous compression plate (PCCP) technique. Methods From March 2009 to May 2012, 154 patients with intertrochanteric femoral fractures were treated using the PCCP method. Forty-one patients were excluded from the study. According to the AO classification, the remaining 113 fractures were classified as 35 cases of 31A1 fractures, 59 cases of 31A2 fractures, and 19 cases of 31A3 fractures. The clinical data and imaging results were retrospectively analysed. Results The mean operation time was 42.0 (range, 25–82) min, the mean intraoperative blood loss was 40.5 (range, 10–100) ml, and the mean hospital stay was 8.6 (range, 3–18) days. One patient died of renal failure in the perioperative period. Twelve patients died during the 12 months after surgery. The remaining 100 patients were followed-up for 12–36 months and healed their fractures except one, whose neck screw cut out from the femoral neck after 1 postoperative month and resulting in a revision to a hemiarthroplasty. The mean time to bone healing was 12.6 (range, 6–23) weeks. Sixteen patients had pain. There were 13 major device-related complications, including 5 cases of coxa vara, 4 cases of fracture collapse, 2 cases of head penetration, and 2 cases of fracture collapse combined with head penetration. At the time of the last follow-up, 81 patients had regained a pre-injury level of function. The median Harris hip score was 89 points. The median Parker-Palmer score was 7 points. Patients with poor quality of reduction and bad positioning of neck screw were more likely to suffer complications ( p < 0.05). Conclusion The results suggest that the PCCP is an effective and safe method in the treatment of all types of intertrochanteric femoral fractures, but good fracture reduction and ideal positioning of the neck screw are prerequisites for the success of the device. [ABSTRACT FROM AUTHOR]

Abstract: Introduction: Although the use of a dynamic hip screw (DHS) is considered to be the preferred treatment for intertrochanteric fractures, the external fixation device could produce clinical outcomes comparable to the outcomes obtained with conventional treatment. Furthermore, because external fixation is minimally invasive, we expected a lower rate of morbidity. Therefore, we compared the two treatments in a clinical trial of elderly patients with intertrochanteric fracture. Methods: 60 elderly high-risk patients with an average age of 78 years were treated for intertrochanteric fracture, resulting from a low energy trauma. Patients were randomly divided in two groups regarding to treatment. In Group A the patients were treated with DHS, while in Group B were treated with external fixator. Results: The fixator was well accepted and no patient had significant difficulties while sitting or lying. The average intraoperative time was 73min in Group A and 15min in Group B (p <0.05). 27 patients of Group A need blood transfusion postoperatively and none in Group B (p <0.05). The mean duration of hospitalization in Group A and Group B was 8.4 and 2.2 days, respectively (p <0.05). 9 of patients Group B had pin-track infection grade 2 that all were treated by oral antibiotics. There were no differences in comorbidities, quality of reduction, screw cut out, bed sore and HHS between the two groups. Conclusion: Treatment with external fixator is an effective treatment for intertrochanteric fractures in elderly highrisk patients. The advantages include quick and simple application, minimal blood loss, less radiation exposure, adequate fixation, pain reduction, early discharge from hospital, low costs and favourable functional outcomes. [Copyright &y& Elsevier]

Purpose: A prospective study of neglected femoral neck fractures in mostly young patients was conducted to evaluate whether our technique of valgus intertrochanteric osteotomy with fibular strut grafting and osteosynthesis with dynamic hip screw and double-angle side plate can facilitate union with consistent satisfactory clinical outcomes. Methods: Forty-one consecutive patients (27 males, 14 females) of neglected femoral neck fractures treated between April 2002 and December 2009 were studied. The average age of patients was 45.41 years (±11.67, range 20–62 years). The average interval since injury was 14 weeks (±10.21, range 4–44 weeks). The cases were evaluated radiographically and clinically. Results: The average follow-up period was 32.5 months (±8, range 24–54 months). Radiographically union was seen in 39 patients at the nonunion site. The average time to radiographic union was 16.82 weeks (±3 weeks, range 12–24 weeks). Average Harris Hip Score (HHS) was 19.9 (±7.9, range 10–35) preoperatively and 90.9 (±10.35, range 62–100) at the latest follow-up. At that time clinical outcomes were excellent in 31, good in four, fair in three and poor in three patients. Conclusion: Our mechanobiological surgical technique is reproducible with radiographic union achieved in 95.12% cases (39 patients) at the nonunion site and consistent excellent or good functional outcome in 85% of patients over a 32-month average follow-up. We recommend this procedure for neglected femoral neck fractures. [ABSTRACT FROM AUTHOR]

Abstract: Aim: To establish whether the modified anatomic plate (MAP) performs as well as the anatomic plate (AP), dynamic hip screw (DHS) and proximal femoral nail (PFN) from a biomechanical perspective. Materials and methods: The, AP, MAP, DHS and PFN were assessed using finite element (FE) methods and biomechanical tests. A solid model was created based on the fracture lines and results were assessed using analyses of variance. Main outcome measurements: Independent variables were the implants (n =4) and axial loads: 0–1000 Newton (N) in 100N increments. Dependent variables were loads at the intertrochanteric fracture line as measured by load cells. Results: Axial loads ≤400N generated significantly (p <0.05) greater stress at the fracture line in both the FE model and biomechanical settings: the PFN generated the highest forces at the fracture line followed by the AP, MAP and DHS. For axial loads ≥400N, the AP and DHS generated nonsignificant (p >0.5) lower forces (almost 50% less) compared with the MAP and PFN. At 1000N, the DHS generated the highest (p <0.05) load at the fracture line. Conclusion: The biomechanical features of the MAP were similar to those of the PFN. The MAP generated optimal loads at both the fracture site and the proximal femur. FE methods and biomechanical tests revealed that the MAP is associated with both intra- and extra-medullary fixation features, even though the load was applied as an extramedullary stimulus. [Copyright &y& Elsevier]

Abstract: Design: Prospective randomised comparative study. Objectives: To analyse and compare serum soft-tissue marker differences after dynamic hip screw (DHS) and proximal femoral nail (PFN) fixation of stable intertrochanteric fractures in the elderly. Materials and methods: Twenty elderly patients (>60 years old) with a stable intertrochanteric fracture were enrolled in this study. Patients were divided into two groups of 10 each according to the device used (DHS or PFN). All 20 patients had a stable intertrochanteric fracture, and all were operated on by the same surgeon using minimal invasive approach. A biochemical comparison of soft-tissue serum markers was performed. The serum markers examined were haemoglobin (Hb), haematocrit (Hct), creatine kinase (CK), myoglobin (MYO), troponin I and C-reactive protein (CRP), and their levels were determined before surgery, and 1, 8, 16, 24, 36, 48 and 72h after surgery. Differences between the DHS and PFN groups were compared. Results: No inter-group differences were observed with respect to preoperative demographics, operation time, incision length or blood loss. In terms of serum markers, both methods showed similar patterns of change for CK, MYO and CRP pre- to post-operatively. In addition, pre- and post-operative Hb and Hct levels were similar. Furthermore, no inter-group differences were observed between the absolute values of serum markers at any point. Conclusion: The absolute values and temporal changes of serum markers were similar in the two study groups. These findings suggest that DHS and PFN fixation of stable intertrochanteric fractures produce similar levels of soft-tissue damage. [ABSTRACT FROM AUTHOR]

Abstract: Computed tomography (CT) is currently considered to be an accurate method for evaluating bone density. We evaluated the CT measurements of bone density using the Hounsfield units (HUs) in 23 patients who had been operated in the past for an extra-capsular hip fracture. Twelve patients were treated with a dynamic hip screw and 11 with a proximal femoral expandable hip nail. All the CTs had been performed for non-orthopedic purposes. Bone density with a region of interest (ROI) could be assessed for both hips. We compared the bone density between the operated versus the non-operated sides as well as between the two surgical groups. Bone density was higher in the hip peg (the femoral component of the expandable nail) side 262.5 (range, 169–351) HU, compared to the opposite non-operated side and to the hip screw group 194 (range, 99–283) HU. The hip screw side had decreased bone density compared to the opposite non-operated side. We were able to define a density index and a difference index: both were higher in the hip peg group. These findings persisted over time. It would be interesting to speculate that increased bone density around an expandable peg provides better fracture stabilization and probably faster healing than a dynamic hip screw. [Copyright &y& Elsevier]

Abstract: Aim: Numerous studies have been published regarding the comparison between intramedullary nail and the dynamic hip screw and plate for the fixation of intertrochanteric fractures in elderly patients. In this paper we present a comparative study of these two methods regarding their systemic effects on this group of patients. Materials–methods: This is a randomized trial of 120 consecutive patients with an intertrochanteric fracture treated with either extramedullary fixation (dynamic hip screw and plate; DHS, Synthes-Stratec, Oberdorf, Switzerland) or intramedullary nail (Gamma nail, Stryker Howmedica, Freiburg, Germany and Endovis BA, Citieffe, Bologna, Italy). The parameters that we assessed pre-operatively, in addition to their demographics, included their mental state (MMSE), their nutritional and immune state and their pulmonary function. Intra-operatively we calculated the amount of radiation exposure, the amount of blood loss and the length of operative time for each procedure. Postoperatively we repeated the calculation of the mental and pulmonary state and the blood loss, during days 1, 3, and 10 and related them to the ease of the patient''s mobilization. Results: Decreased bleeding and post-operative pain, reduced post-operative morbidity and faster recovery of function were better but not significant in the group of intramedullary fixation (all p >0.05). However, in the same group there were slightly more patients in whom the MMSE was falling, together with their pulmonary function, suggesting that this method probably predisposes to higher chances of pulmonary dysfunction and the possibility of pulmonary embolism. Conclusion: We found no significant differences between the two methods of stabilization of these fractures regarding their systemic effects perioperatively. The classic dynamic hip screw can preserve its position as a safe and effective solution for these already vulnerable patients having sustained a trochanteric fracture against the novel intramedullary techniques. [Copyright &y& Elsevier]

Summary: We investigated the sliding pattern characteristics of proximal fragment in 16 proximal femur models of 31-A2.1 type trochanteric fractures fixed with dynamic hip screw system under load. In eight models, the lag screw was inserted with an anterior-to-posterior vector within the neck and the head of femur (group 1). The other eight had a posterior-to-anterior vector (group 2). A force of 500N (30 cycles) was applied to the fracture fragment-plate complex using the Instron 6022. No significant difference was noted in the sliding distance between the two groups (p =0.17). However, the mean angle of rotation of the proximal fragment was twice as great in group 1 (16±3.7°) than that in group 2 (8.1±1.5°) (p <0.001). In group 1, early eccentric contact in the anterior aspect of the intertrochanteric area caused internal rotation of the proximal fragment. Breakage of the anterior cortex of the lateral wall was noted in five out of the eight cases in group 1 and no case in group 2 (p =0.026). Fracture of the anterior cortices significantly threatened the integrity of the lateral wall in group 1. [Copyright &y& Elsevier]

Objective: Intertrochanteric hip fractures are very common and early mobilisation correlates with a better outcome. The ideal surgical procedure should protect the soft tissue envelope, thereby preserving blood supply and reducing blood loss. Furthermore, occupational exposure to fluoroscopy that is used in hip fracture fixation remains a concern amongst orthopaedic surgeons. Computer-aided surgery can help to reduce reliance on fluoroscopy. We therefore combined the principles of minimally invasive plate osteosynthesis (MIPO) and computer navigation to describe a new procedure. We also present our results using this technique of minimally invasive computer-navigated dynamic hip screw fixation (navMIS-DHS), and compare it to computer-navigated open DHS fixation (nav-DHS) and to conventional open DHS fixation (conv-DHS). Materials and Methods: This paper has three parts. In the first part, we describe the procedure of navMIS-DHS in detail. In the second part, we present our initial retrospective pilot series of 35 cases. Amongst them we performed 5 navMIS-DHS, 3 nav-DHS and 27 conv-DHS. There were also two cases of conv-DHS deliberately performed with a mini-incision in an attempt to see if we could duplicate the 5 cm incision that we achieved with navMIS-DHS. All patients were followed up for a minimum of 6 months. In the third part, we performed a single surgeon prospective evaluation of navMIS-DHS versus conv-DHS involving 43 fractures in two arms. Results: We were able to achieve reduction in fluoroscopy time. There was also reduction in opiate requirement post-operatively in the minimally invasive procedure. The incision sizes were also smaller. The prospective study also showed less wound-related complications in navMIS-DHS and a shorter time to ambulation. Implant positions were acceptable but we have also described how it may be improved. Conclusions: Navigated MIS-DHS, by virtue of less pain, better healing, earlier rehabilitation and potentially shorter hospital stay, would benefit both the patients and reduce the economic strain on the health care system. It is a safe and reproducible procedure. Technical difficulties are present and these need to be addressed with further modifications of technique, and instrumentation. [ABSTRACT FROM AUTHOR]

Summary: We present the results of a technique of dynamic hip screw insertion through a very small incision, typically 2–2.5cm. The technique is performed using a standard dynamic hip screw set and requires no additional equipment. We compared the results to those of an age and sex-matched group who had undergone the operation through a traditional approach. We compared the time spent in theatre, the pre- and post-operative haemoglobin concentration, haematocrit and prevalence of wound infection. Thirteen consecutive cases were performed by one surgeon using the percutaneous technique. There were nine females and four males with a mean age of 84 years (range 62–96 years). Each had a 135° four-hole plate. The mean post-operative drop in haemoglobin concentration in the percutaneous group was 2.2g/dl (range 0–4.4g/dl) compared to 3.5g/dl (range 1.2–5.4g/dl) in the control group (p =0.014). The mean haematocrit drop was 0.07 (range 0–0.12) in the percutaneous group compared to 0.10 (range 0.03–0.17) in the control group (p =0.017). The mean theatre time with the percutaneous technique was 57min (range 40–75min) and in the control group, 60min (range 30–95min). There were no wound problems. It is likely that this minimally invasive technique offers a better clinical outcome at no extra expense and warrants further evaluation in a larger study. [Copyright &y& Elsevier]

Summary: Forty-two geriatric patients who had an intertrochanteric fracture were treated with a semicircular modification of the Ilizarov frame designed by Cattaneo and Catagni between January 1997 and September 2001. Twenty-five of the patients were female, 17 male. The average age of the patients was 77.5years (range, 63–99). No intraoperative complication occurred. Deep pin-track infection was found in four patients and varus deformity was observed in two patients and shortening of less than 2cm in 10 patients. Fixator removal was achieved in a mean time of 12weeks (range, 10–18). No implant failure, refracture or stiffness of knee and hip joint movements was recorded. We concluded that the treatment of intertrochanteric fractures of the elderly patients with our modification provides significant advantages such as minimal operative and anaesthetic risks, no blood loss, early weight-bearing, short hospitalisation time and rapid union time. [Copyright &y& Elsevier]

The sliding hip screw is the implant of choice for the operative treatment of stable pertrochanteric femur fractures (AO classification 31-A.1). For this indication, a four-hole side plate with four bicortical screws is widely used to allow full weight bearing immediately after operation, but scientific support for the need of such a long side plate is not available. A shorter side plate is potentially less invasive.Therefore, we retrospectively evaluated all 148 consecutive patients (median age 80 years) with a stable pertrochanteric femur fracture who were treated between 1995 and 2001 with a dynamic hip screw (DHS) and a short (two-hole) side plate and immediate full weight bearing mobilisation.Although two wound hematomas and four wound infections occured, 145 fractures healed radiologically without implant-related complications within 6 months. Two hip screws cut out of the femoral head due to a poor position. In one patient, the side plate broke out after a fall out of bed on the fifth postoperative day. Pull off of any two-hole side plate during early full weight bearing mobilisation without further trauma was not observed.We conclude that fixation of stable pertrochanteric femur fractures with a two-hole DHS is safe. The traditional use of a four-hole DHS plate for this indication is therefore ‘over-treatment’ since it is more invasive. [Copyright &y& Elsevier]

Tip-apex distance is a well described method for assessment of screw placement in dynamic hip screw fixation of proximal femoral fracture. A distance of <25 mm is associated with a significantly lower rate of cut out of the fixation device. Measurement is frequently performed retrospectively, although there has been no demonstration as to what accuracy the surgeon has of estimating tip-apex distance from image intensifier images, whilst scrubbed in theatre. Thirty-one clinicians working within orthopaedic departments were tested in their ability to identify adequacy of tip-apex distance on a series of image intensifier images. Level of seniority, awareness of the concept of tip-apex distance and use of the concept in clinical practice were each assessed. The accuracy in identifying the correct TAD was 82.5% in consultants, 83.8% in registrars and 71.1% in Senior house officers (SHO). The method was used in clinical practice by 50% of consultants, 89% of registrars and none of the SHOs. [ABSTRACT FROM AUTHOR]