Search

Anionic cellulose nanofibers (CNFs) were used to stabilize emulsions that combined water-soluble (and oil-soluble), strongly antioxidant extracts with a water-immiscible, notably antimicrobial essential oil. Specifically, the radical scavenging activity was primarily provided by aqueous extracts from olive fruit (Olea europaea L.), while the antimicrobial effects owed eminently to thyme oil (Thymus vulgaris L.). The resulting emulsions were highly viscous at low shear rate (4.4 Pa·s) and displayed yield stress. The addition of edible salts decreased the yield stress, the apparent viscosity and the droplet size, to the detriment of stability at ionic strengths above 50 mM. Once characterized, the antioxidant and antimicrobial emulsions were applied on packaging-grade paper. Coated paper sheets inhibited the growth of Listeria monocytogenes, a common foodborne pathogen, and acted as antioxidant emitters. In this sense, the release to food simulants A (ethanol 10 vol%), B (acetic acid 3 wt%), and C (ethanol 20 vol%) was assessed. A 24-hour exposure of 0.01 m 2 of coated paper to 0.1 L of these hydrophilic simulants achieved inhibition levels of the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) in the 15-29 % range. All considered, the bioactive properties of thyme essential oil towards lipophilic food products can be complemented with the antioxidant activity of aqueous olive extracts towards hydrophilic systems, resulting in a versatile combination for active food packaging., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

User-friendly in-field sensing protocol is crucial for the effective tracing of intended analytes under less-developed countries or resources-limited environments. Nevertheless, existing sensing strategies require professional technicians and expensive laboratory-based instrumentations, which are not capable for point-of-care on-site analyses. To address this issue, artificial intelligence handheld sensor has been designed for direct reading of Ni 2+ and EDTA in food samples. The sensing platform incorporates smartphone with machine learning-driven application, 3D-printed handheld device, and cellulose paper microfluidic chip stained with ratiometric red-green-emission carbon dots (CDs). Intriguingly, Ni 2+ introduction makes green fluorescent (FL) of CDs glow but red FL fade because of the coordination of Ni 2+ with CDs verified by density functional theory (DFT), concurrently manifesting continuous FL colour transition from red to green. Subsequent addition of EDTA renders FL of CDs-Ni 2+ recover owing to the capture of Ni 2+ from CDs by EDTA based on strong chelation effect of EDTA on Ni 2+ confirmed via DFT, accompanying with a noticeable colour returning from green to red. Inspired by above FL phenomena, CDs-based cellulose paper microfluidic chips are first fabricated to facilitate point-of-care testing of Ni 2+ and EDTA. Designed fully-automatic handheld sensor is utilized to directly output Ni 2+ and EDTA concentration in water, milk, spinach, bread, and shampoo based on wide linear ranges of 0-48 μM and 0-96 μM, and low limits of detection of 0.274 μM and 0.624 μM, respectively. The proposed protocol allows for speedy straightforward on-site determination of target analytes, which will trigger the development of automated and intelligent sensors in near future., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Shaomin Shuang reports that funding was provided by National Natural Science Foundation of China. Bianxiang Zhang reports that funding was provided by Central Guidance Local Science and Technology Development Fund Project. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this work, shellac and its crosslinking were studied to produce paper straws for the application of liquid products. Commercial paper straws are not durable for liquid foods due to their hygroscopic nature, and thus, they find it challenging to replace single-use plastics. Shellac is a naturally occurring resin utilized as an adhesive and water-resistant coating over the paper straw. Shellac was cured at 125 °C, 150 °C, 175 °C, and 200 °C, and it was crosslinked in about 210 min, 150 min, 60 min, and 30 min respectively and studied for kinetics. The crosslinking of shellac produced a thermally stable material. Compared to commercial paper straws, these paper shellac straws exhibited high bending stiffness (1356.11 Nmm), tensile strength (13,74 MPa), flexural strength (21.72 MPa), and compression strength (24.99 MPa). Moreover, the paper shellac straws didn't bend in wet conditions under load for up to one day, while the commercial paper straw bends in 8 min. Therefore, paper straws with shellac can replace plastic-based straws for a sustainable future., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Arihant Ahuja reports financial support was provided by the Prime Minister Research Fellowship, Ministry of Education, India. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The work was aimed at evaluating the adsorptive properties of waste newspaper (WN) activated carbons chemically produced using sodium salts for methylene blue (MB) and congo red (CR) removal. The activated carbons, designated as AC1, AC2, AC3 and AC4 were prepared through impregnation with NaH 2 PO 4 , Na 2 CO 3 , NaCl and NaOH, respectively and activation at 500 °C for 1 h. The activated carbons were characterized for surface chemistry, thermal stability, specific area, morphology and composition. The AC1 with a surface area of 917 m 2 /g exhibits a greater MB capacity of 651 mg/g. Meanwhile, a greater CR capacity was recorded by AC2 at 299 mg/g. The pseudo-second order model fitted well with the kinetic data, while the equilibrium data could be described by Langmuir model. The thermodynamic parameters, i.e.., positive ΔH°, negative ΔG° and positive ΔS° suggest that the adsorption of dyes is endothermic, spontaneous and feasible at high solution temperature. To conclude, WN is a potential cellulose source for producing activated carbon, while NaH 2 PO 4 activation could be employed to convert WN into activated carbon for effective dye wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The growing interest in paper-based materials for packaging is driven by their renewable and eco-friendly characteristics. However, their poor barrier performance against water, oil, and gas limits their application in the food packaging industry. In this study, we developed a simple dual-layer coating method to create water- and oil-repellent, gas barrier, antioxidant, and antibacterial paper-based materials using naturally-derived materials, including chitosan (CS), ethyl cellulose (EC), and cascade biorefinery products from green walnut husk (GWHE and CNC). The bottom CS/CNC oil-resistant coating and the top EC/GWHE water-resistant coating were applied to the paper surface. The synergistic effect of these coatings enhances the gas barrier and imparts functional properties to the paper. Compared to uncoated paper, the dual-layer-coated paper demonstrated a 239.1 % increase in tensile index, a higher kit rating value of 12/12, a lower Cobb 60 value of 3.21 mg/m 2 , a 44.0 % decrease in water vapor permeability (WVP), and a 90.7 % reduction in air permeability (AP). Additionally, this coated paper exhibited good antioxidant and antibacterial properties and favorable biodegradability. This study provides novel insights into the valorization of GWH waste and presents a sustainable strategy for producing high-performance paper-based materials for food packaging applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

MOF-199 is considered to be an excellent CO 2 adsorbent owing to its substantial specific surface area, suitable pore structure and abundant sorption sites. However, powdered MOF-199 is prone to agglomeration and has poor recyclability. Herein, we proposed a MOF-199-based adsorbent by combining the MOF synthesis process with traditional papermaking process. Through such a design, MOF-199 particles are adhered on the surface of wood pulp fiber. The sufficient hydroxyl groups and electrostatic forces of cellulose facilitates the homogeneous and tight adhesion of MOF crystals. The optimal MP-4 sample demonstrated a high CO 2 adsorption capacity (1.80 mmol·g --1 at 25 °C) and good CO 2 /N 2 selectivity (30.06). Moreover, the composite sorbent can be easily regenerated. The adsorption mechanism was analyzed by the density functional theory approach. The simulation results showed that the carboxyl functional groups with a large number of oxygen atoms and active metal sites are the key to boost the CO 2 adsorption performance., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Cellulose fibers(CFs)-based electrode materials are of considerable interest for future wearable electronic devices due to excellent flexibility and strength, and hydrophilicity. The effective introduction of electrode materials into CFs is essential for flexible supercapaciotors(SCs). A tunable electrochemical performance of conductive polymers for poly(3,4-ethylenedioxythiophene)(PEDOT) has been aroused great interests. Herein, we design its electrochemical process via sodium anthraquinone-2-sulfonate(AQS) as dopant and electrolyte additive to construct active electrode interior and interface. As a result, the PEDOT@CFs electrode exhibits great increase of doping level from 0.16 to 0.29, conductivity from 353.46 to 626.15 S m -1 , and specific capacitance from 140.22 to 1211.57 F g -1 at a current density of 0.2 A g -1 . Furthermore, the PEDOT:AQS@CFs electrode possess excellent cyclic stability (96.01 %) after 1000 cycles. The work reveals the mechanism of AQS as dopant and electrolyte additive, and provides a new perspective for application of PEDOT in energy storage field., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Due to intrinsic defect of fire hazard security, improving the flame retardant capacity of paper is still insufficient in case of precombustion. Herein, we integrate the flame retardant with flame detection performance on the surface of paper, the restricts of graphene oxide (GO) are overcome between high thermoelectric performance and flexibility. A flexible lamellar thermoelectric composite (GO-LA-HP) is constructed through the co-assembly of GO, ascorbic acid (LA), and phenoxycycloposphazene (HP), lamellar GO-LA-HP avoid GO's toughness decline after modification, but also enhance fire sensitivity and flame resistance. The composite could significantly decrease the temperature rise stage (<150 °C), and trigger the fire-warning within 2 s. The hybrid coating composed of phytic acid/phosphoric acid (PyA/PA) and modified thermoelectric GO-LA-HP becomes excellent compatibility on the surface of the modified paper (GPP). GPP is able to extinguish itself immediately after leaving the fire in the vertical combustion, and display the excellent flame resistance. Furthermore, GPP's alarm signal could be timely generated as little as 3 s of contacting the flame, and the response time can exceed 600 s. According to the structure observation and analysis, the related synergistic fire detection reinforcing and flame-retardant mechanisms are also proposed and clarified., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

To optimize the imbalance between the interfacial bonding and porosity properties of carbon paper (CP) caused by phenol formaldehyde resin (PF) impregnation, and therefore improve the performance of proton exchange membrane fuel cells (PEMFCs), a new approach through cellulose nanofibers grafted with methyl methacrylate (CNFM) as a modified reinforcement and pore-forming agent for PF is investigated. Through suppressing the methylene backbone fracture of CNFM-modified PF during its thermal depolymerization, the interfacial bonding between PF matrix carbon and carbon fibers is enhanced. Compared with unmodified CP, the in-plane resistivity of CNFM-modified CP is reduced by 35.78 %, while the connected porosity increases to 82.26 %, and more homogeneous pore size distribution (PSD) in the range of 20-40 μm is obtained for CNFM-modified CP. Besides, the tensile strength, flexural strength, and air permeability of CNFM-modified CP increase by 72.78 %, 298.4 %, and 103.97 %, respectively. In addition, CNFM-modified CP achieves the peak power density of PEMFCs to 701.81 mW·cm -2 , exhibiting 10.98 % improvement compared with commercial CP (632.39 mW·cm -2 ), evidently achieving an integral promotion of CP and comprehensive performance., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Electromagnetic hydrogels have attracted significant attention due to their vast potential in soft robotics, biomedical engineering, and energy harvesting. To facilitate future commercialization via large-scale industrial processes, we present a facile concept that utilizes the specialized knowledge of papermaking to fabricate hydrogels with multifunctional electromagnetic properties. The principles of papermaking wet end chemistry, which involves the handling of interactions among cellulosic fibers, fines, polymeric additives, and other components in aqueous systems, serves as a key foundation for this concept. Notably, based on these principles, the versatile use of chemical additives in combination with cellulosic materials enables the tailored design of various products. Our methodology exploits the unique hierarchically pitted and hollow tube-like structures of papermaking grade cellulosic fibers with discernible pits, enabling the incorporation of magnetite nanoparticles through lumen loading. By combining microscale softwood-derived cellulosic fibers with additives, we achieve dynamic covalent interactions that transform the cellulosic fiber slurry into an impressive hydrogel. The cellulosic fibers act as a skeleton, providing structural support within the hydrogel framework and facilitating the dispersion of nanoparticles. In accordance with our concept, the typical hydrogel exhibits combined attributes, including electrical conductivity, self-healing properties, pH responsiveness, and dynamic rheologic behavior. Our approach not only yields hydrogels with interesting properties but also aligns with the forefront of advanced cellulosic material applications. These materials hold the promise in remote strain sensing devices, electromagnetic navigation systems, contactless toys, and flexible electronic devices. The concept and findings of the current work may shed light on materials innovation based on traditional pulp and paper processes. Furthermore, the facile processes involved in hydrogel formation can serve as valuable tools for chemistry and materials education, providing easy demonstrations of principles for university students at different levels., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The aging of paper seriously threatens the service life of cultural heritage documents. Bacterial cellulose (BC), which has a good fiber aspect ratio and is rich in hydroxyl groups, is suitable for strengthening aged paper. However, a single BC added was not ideal for paper restoration, since only strengthening was not able to resist the persistent acidification of ancient book. In this work, BC was functionalized by 3-aminopropyltriethoxysilane (APTES) to develop the interface bonding with aged paper. Fourier transform infrared (FTIR), X-ray diffraction (XRD), nuclear magnetic resonance (NMR) and elemental analysis identified the successful amino-silanization of BC. The modification parameters were optimized as the concentration of APTES of 5 wt%, the reaction time of 4 h, and the reaction temperature of 80 °C based on a considerable improvement in the strength properties without obvious appearance impact on reinforced papers. Moreover, the pH value of the repaired paper was achieved at 8.03, ensuring the stability of the anti-aging effect. The results confirmed that APTES-BC had great potential applications in ancient books conservation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. All the authors listed have approved the manuscript enclosed., (Copyright © 2024. Published by Elsevier B.V.)

Developing plastic/fluorine/silicon-free and degradable water/oil-resistant coatings for paper-based packaging materials to replace disposable plastic products is a very effective way to solve the problem of 'white pollution' or microplastics pollution. A novel water/oil-resistant coating was developed by alkyl ketene dimer (AKD)-based Pickering emulsion and chitosan in this work. Cellulose nanofibrils (CNF) were used as a stabilizing solid for AKD emulsion, with the addition of chitosan as an oil-resistance agent. The coating provides excellent hydrophobicity, water/oil resistance as well as good barrier properties. The water contact angle was as high as 130° and the minimum Cobb60 value was 5.7 g/m 2 , which was attributed to the hydrophobicity of AKD. In addition, the kit rating reached maximum 12/12 at coating weight of 8.26 g/m 2 and the water vapor transmittance rate (WVTR) was reduced to 153.4 g/(m 2 ⋅day) at the coating weight of 10.50 g/m 2 . The tensile strength of the paper was increased from 28.1 to 43.6 MPa after coating. Overall, this coating can effectively improve the performance of paper-based materials, which may play an important role in the process of replacing disposable plastic packaging with paper-based materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Counterfeiting has caused great concern all over the world. What's more, the fluorescent materials play an important role in technological research and development for high-security. In this work, lead-metal-organic framework (Pb-MOF) and perovskite (MAPbBr 3 ) were used in papers to achieving fluorescence counterfeiting. Pb-MOF, as the template or precursor of MAPbBr 3 , were in-situ generated on the surface of cellulose fibers (CFs) to preparing into hand sheets (Pb-MOF@CFs). Through the analysis of experimental results, it was found that ligands, reaction systems, addition sequences of drugs, time, etc. would affect the deposition of Pb-MOF on the surface of CFs. Using CH 3 NH 3 Br (MABr) as the anti-counterfeiting ink to write on Pb-MOF@CFs, the orange writing leaped across the paper, which caused by Pb in Pb-MOF chemically reacting with MABr forming MAPbBr 3 . The orange writing displayed green fluorescence under 365 nm ultraviolet lamp excitation. The orange writing with green fluorescence could be extinguished and reconstructed, which had promise for reuse. In addition, fluorescent security papers (MAPbBr 3 @Pb-MOFs@CFs) were prepared by immersing Pb-MOF@CFs in MABr solution. The fluorescence of MAPbBr 3 @Pb-MOFs@CFs opened when the surface of it was scraped under 365 nm ultraviolet lamp. This unique fluorescence property was very important in improving the security of products. Consequently, the ongoing research on perovskite and MOFs materials is of great significance., Competing Interests: Declaration of competing interest We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our work, there is no professional or other personal interest of any nature or kind in any product, service and/or company that could be construed as influencing the position presented in, or the review of, the manuscript entitled., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The demand for paper-based packaging materials as an alternative to incumbent disposable petroleum-derived polymers for food packaging applications is ever-growing. However, typical paper-based formats are not suitable for use in unconventional applications due to inherent limitations (e.g., excessive hydrophilicity, lack antimicrobial ability), and accordingly, enabling new capabilities is necessity. Herein, a simple and environmentally friendly strategy was proposed to introduce antimicrobial and hydrophobic functions to cellulose paper through successive chemical grafting of 3-aminopropyltriethoxysilane (APS) and cinnamaldehyde (CA). The results revealed that cellulose paper not only showed long-term antibacterial effect on different bacteria, but also inhibited a wide range of fungi. Encouragingly, the modified paper, which is fluorine-free, displays a high contact angle of 119.7°. Thus, even in the wet state, the modified paper can still maintain good mechanical strength. Meanwhile, the multifunctional composite papers have excellent biocompatibility and biodegradability. Compared with ordinary cellulose paper, multifunctional composite paper can effectively prolong the shelf life of strawberries. Therefore, the multifunctional composite paper represents good application potential as a fruit packaging material., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Sustainable strategies to improve the water resistance of cellulose paper are actively sought. In this work, polymeric microspheres (PMs), prepared through emulsion polymerization of cellulose nanofibers stabilized rubber seed oil-derived monomer, were investigated as coatings on corrugated medium paper (CMP). After infiltrating porous paper with PMs, the water-resistant corrugated papers (WRCP n ) with enhanced mechanical properties were obtained. When 30 wt% PMs were introduced, WRCP 30 turned out to be highly compacted with an increased water contact angle of 106.3° and a low water vapor transmission rate of 81 g/(m 2 d) at 23 °C. Meanwhile, the tensile strength of WRCP 30 increased to 22.2 MPa, a 4-fold increase from CMP. When tested in a well-hydrated state, 71% of its mechanical strength in the dry state was maintained. Even with a low content of 10 wt% PMs, WRCP 10 also exhibited stable tensile strength and water wettability during the cyclic soaking-drying process. Thus, the plant oil based sustainable emulsion polymers provide a convenient route for enhancing the overall performance of cellulose paper., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Over the centuries, various types of paper have been produced, each characterized by a different ratio of natural macromolecules, mainly lignin and cellulose. Handmade paper has a higher content of cellulose with respect to the early machine-made paper, where lignin is the other important component. Microorganisms are able to colonize and deteriorate both types. They can release on their surfaces pigments and colorants which produced anesthetic stains. To better understand the microbiota colonizing these stains, 17 samples were analyzed, from both handmade and machine-made paper surfaces, as well as library and archive environments. Combination of microbiological and high-throughput sequencing (HTS) approaches were applied. The culture-dependent methodology comprised: isolation, DNA identification, hydrolytic and paper staining assays. The HTS was performed by MinION platform and for the mycobiome a more suitable bioinformatics analysis pipeline, MetONTIIME based on QIIME2 framework, was applied. The paper model staining assay permitted the direct recognition of colorizing isolates which in combination with sequencing data evidenced a complex microbial community able to stain the two types of paper. Staining abilities were confirmed by frequently isolated and detected fungi as well as newly discovered ones Roussoella euonymi and Achaetomium. We have also evidenced the staining ability of several bacteria., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Bio-based additives received significant attention in pulp and paper properties improvement. For this, the most cited biochemical Cellulose Nano Fibrils (CNFs) and Cationic Starch (CS) were experimentally compared with the most declared synthetic chemical, Cationic Polyacrylamide (CPAM). SEM images showed better paper surface filling by the utilization of the chemicals. The three studied polymers, in solely or combination mechanism, improved mainly bagasse pulp and paper properties compared to the blank sample, except for pulp drainage, which decreased by CNFs to lower volumes presumably due to its intrinsic characteristics. Cationic polymers (CP) compared to CP/CNFs approaches increased pulp retention and drainage but decreased paper density and strengths. The best pulp retention and drainage achieved by CS followed by CPAM, while paper air persistency, density, and strength properties evaluated highest by CP/CNFs followed by CNFs. Generally, CS revealed a more significant improvement in pulp and paper properties than CPAM either with or without CNFs., (Copyright © 2021 Elsevier B.V. All rights reserved.)

In this study, we developed an in-package colorimetric paper to monitor the ripeness of kiwifruit by detecting the release of aldehydes. Strongly hydrophobic composite films were prepared using chitosan as the matrix and beeswax as an additive. A piece of cellulose paper containing methyl red and bromocresol violet as color indicators was heat-sealed between two hydrophobic films to protect the indicators from the effects of fruit respiration and transpiration. The nucleophilic addition reaction between aldehydes and OH - (Cannizzaro reaction) changes the pH in the paper and triggers a color change in the indicators. As the kiwifruit ripens, the colorimetric paper changes from bluish-purple to dark red and then gradually to red. A mobile phone application was further used to measure the RGB values and link them to kiwifruit ripeness. This intelligent paper can be used for the accurate and convenient monitoring of produce in real time., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Packaging is as important as the product itself because it is a crucial marketing and communication tool for business. Oxidized nanocellulose (ONC), extracted from agriculture residues of bagasse raw material using ecofriendly ammonium persulfate hydrolysis method, is used as support/reducing agent for the generation of silver nanoparticles (AgNPs) via photochemical procedure and reinforcing element in paper functionalization. The natural polymer, sodium alginate (SA) is exploited to enhance the binding of the ONC-AgNPs over cellulose fibers. The SA/ONC-AgNPs bio-nanocomposite is incorporated on paper matrix, which represents a more suitable choice respect to other substrates for its renewable, biocompatible, biodegradable, and cost-effective properties. Structural and antimicrobial evaluations show that the papers embedded with the SA/ONC-AgNPs possess good mechanical, thermal, barrier and antibacterial properties., Competing Interests: Declaration of competing interest There is no conflict of interest in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Hydrophobization of cellulosic materials and particularly paper products is a commonly used procedure to render papers more resistant to water and moisture. Here, we explore the hydrophobization of unsized paper sheets via the gas phase. We employed three different compounds, namely palmitoyl chloride (PCl), trifluoroacetic anhydride/acetic anhydride (TFAA/Ac 2 O)) and hexamethyldisilazane (HMDS) which were vaporized and allowed to react with the paper sheets via the gas phase. All routes yielded hydrophobic papers with static water contact angles far above 90° and indicated the formation of covalent bonds. The PCl and TFAA approach negatively impacted the mechanical and optical properties of the paper leading to a decrease in tensile strength and yellowing of the sheets. The HMDS modified papers did not exhibit any differences regarding relevant paper technological parameters (mechanical properties, optical properties, porosity) compared to the non-modified sheets. XPS studies revealed that the HMDS modified samples have a rather low silicon content, pointing at the formation of submonolayers of trimethylsilyl groups on the fiber surfaces in the paper network. This was further investigated by penetration dynamic analysis using ultrasonication, which revealed that the whole fiber network has been homogeneously modified with the silyl groups and not only the very outer surface as for the PCl and the TFAA modified papers. This procedure yields a possibility to study the influence of hydrophobicity on paper sheets and their network properties without changing structural and mechanical paper parameters., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

Nanofibrillated cellulose (NFC), a promising bio-based nanomaterial, has received much attention in the field of coating preparation due to its unique properties. Herein, NFC was prepared from microcrystalline cellulose (MCC) via high-pressure homogenization process and deliberately employed as coating agent to enhance the properties of paper coatings and coated paper. The results demonstrated that the obtained paper coatings exhibited strong NFC concentration dependence on rheological behavior and displayed decreased water retention value with the increased NFC addition. Meanwhile, NFC addition was found to lead to the reduced Cobb value, improved air resistance, and enhanced tensile strength of coated paper. Under an optimized NFC addition of 0.30-0.40%, the properties of coated paper generally reached the optimum state. Moreover, SEM observation further confirmed that NFC addition imparted a relatively uniform surface structure to coated paper. Hence, NFC could be defined as an effective coating agent for developing high-performance coated paper for food packaging applications., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Starch and derivatives thereof have proven their usefulness in paper coating processes. Among these derivatives, cationic starch has been widely used in the paper industry as a flocculation, dispersion and ink fixing agent. In another context, nanoscale cellulosic materials have been shown to improve the strength, retention of fillers, the barrier properties of packaging paper products, and printing qualities. This review summarizes the recent studies on the general components used in paper coating, describes the conventional and alternative synthetic processes of cationic starches and nanocellulose, and deals with their current and potential applications in papermaking, focusing primarily on surface treatments. Moreover, environmental applications have been considered to expand the understanding and usefulness of these materials. Further research on modified polysaccharides is encouraged to replace, in a feasible way, petro-based components of coating formulations, and to provide paper surfaces with new properties., Competing Interests: Declaration of competing interest The authors declare no conflicts of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In this work, we prepared novel cellulosic paper by incorporating tannin into the kraft pulp for potential application in active food packaging. The kraft pulp fibers were firstly periodate oxidized to obtain the dialdehyde cellulosic fibers, and then reacted with varied dosages of tannin to incorporate them into the fibers by covalent bondings between aldehyde groups on cellulose and active hydrogen on tannin. Handsheets were prepared using the tannin incorporated fibers through papermaking process and the properties were characterized. The percentage of tannin in the paper increased with the increase of the tannin dosage. FT-IR spectra confirmed the successful incorporation of tannin into the cellulosic fibers. It was found that paper after incorporation of tannin turned to be surface hydrophobic with contact angles higher than 90°, which may probably due to the covalent bonds between tannin and cellulose. The handsheets show high antioxidative and UV-shielding properties, which both increased with the increase of the tannin percentage in the paper. Water vapor transmission rate (WVTR) decreased after the incorporation of tannin, and this could facilitate its application in food packaging. The breaking length of tannin incorporated paper decreased insignificantly, less than 10% with the tannin percentage as high as 45%., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Chitosan with low (25 kDa) and high molecular weight (2100 kDa) were used to enhance performances of paper made from steam-exploded bamboo fibers and nanofibrillated cellulose. Chitosan solutions with concentrations of 0-1.0 wt% were manually applied on paper surface using a facile coating approach with a wire bar. Effects of chitosan coatings on morphology, thermal stability, wettability, mechanical performances and antibacterial properties of the paper were investigated. The larger improvement in the mechanical properties and wettability of the chitosan coated paper was observed with increasing concentrations of chitosan due to the disappearance of empty pores between fibers within a cellulose network by the formed chitosan matrix. These improvements were significantly higher when high molecular weight chitosan was applied. Yet, the addition of chitosan slightly decreased the thermal stability of the coated paper, and the chitosan coating did not improve the antimicrobial properties of the paper. The antimicrobial activity of chitosan against Gram-positive (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli) was found to be diminished when a chitosan solution was entrapped within paper. Together with the overall migration of the paper in food simulants, the results suggested that the chitosan coated paper could be applied for non-food-direct-contact packaging materials., (Copyright © 2019 Elsevier B.V. All rights reserved.)

China, a big paper-making country, produced hundreds of millions of tons of waste paper which contain a lot of fiber every year. Cellulose nanocrystals were extracted from recycled waste paper which can be a high value utilization of secondary fiber. In this paper, cellulose nanocrystals were successfully extracted from waste paper fibers via two different systems, sulfuric acid hydrolysis (SCNCs) and one-step ammonium persulfate (APS) oxidation (OCNCs). This not only broadened the methods of extracting CNCs from waste paper, but also improved the dispersion and reactivity of CNCs. The CNCs products were investigated by FT-IR spectroscopy for functional group structure, X-ray diffraction for crystal structure, TG-DTG for thermal stability and scanning electron microscope, transmission electron microscope for morphology. The results showed that both OCNCs and SCNCs were a rod-like structure. The crystallinity of OCNCs and SCNCs increased to 72.45 and 77.56, but with a low yield of 22.42% and 41.22%, respectively. The result also suggested H 2 O 2 formed by decomposition of APS, selectively oxidized the hydroxyl on the C 6 in cellulose to carboxyl, introduced 0.57 mmol/g carboxyl. Successful preparation of CNCs extracted from waste paper can effectively utilize the fiber resources in waste paper, thus transforming into higher economic benefits., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The present study delineates the preparation, characterization, and application of (3-Aminopropyl)triethoxysilane (APTES)/Caprine liver-derived extracellular matrix (CLECM) coated paper matrix for cell delivery. Here, we exploited positively charged surface of the paper matrix (as imparted by APTES derivatization) to improve the biological responses of the cells. Our results demonstrated that the functionalized paper matrixes favored the adhesion, growth, and proliferation of multiple cell types including normal, transformed, cancerous, and stem cells as compared to the pristine paper matrix. Upon implantation into the mice model, the developed paper matrix supported infiltration of the host cells and vasculature without showing any evidence of significant systemic toxicity. Moreover, the cells cultured on the paper matrix, when delivered to the CAM and mouse models, showed an enhanced vascular network around the substrate, thereby confirming its potential to deliver the cells in vivo. Together, the study confirms that the reported paper-based platform is easy to fabricate, cheap, portable and could efficiently be applied to cell delivery applications for either tissue repair or the development of humanized animal model., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The current research intended to explore the hardwood pulps capabilities to produce cellulose (CNPs) and lignocellulose nanopapers (LNPs) and feasible enhancement of their performance for possible utilization in sustainable packaging. The high-yield hardwood pulps were then bleached to show the fundamental role of residual lignin on the ultrafine fibrillation processes, structural and barrier properties of nanopapers. X-ray diffraction results demonstrated that the crystallinity and crystallite size of CNPs and LNPs were lower than the corresponding starting pulps. Field emission scanning electron microscopy analysis showed that the average nanofibril diameter of the CNPs and LNPs are 35 nm and 23 nm, respectively. Elastic modulus of LNPs was found to be 9.1 and 10.8 GPa for Chemimechanical and Neutral sulfite semichemical pulps, respectively. The semi-porous and consolidated structure of LNPs prepared from CMP fibers contributed to yield the lowest water vapor transmission rate i.e. 108 g/m 2 .day which is promising for potential applications in packaging materials., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This paper reports a simple, facile and rapid preparation of 3‑mercapto‑propanoic acid (MPA) modified cellulose filter paper (MPA-Cell paper) for arsenate removal from drinking water. The MPA was covalently grafted to the cellulose filter paper (Cell) by esterification process through the formation of O‑acylisourea intermediate and characterized by the FTIR, SEM, EDS and XPS analyses. The arsenate adsorption efficiency was studied for batch and semi-continuous systems while exploring the adsorption kinetics, isotherm and the effect of pH for the former. The experimental data fitted well with Langmuir, Dubinin-Radushkevich (DR) and pseudo second order kinetic models. The mechanism of adsorption was studied by FTIR spectroscopy utilizing the adsorption isotherm, kinetic model and XPS results. The modified filter paper performed well at nearly neutral pH in arsenate removal through adsorption and demonstrated a significant arsenate uptake capacity of 92.59 mg/g. The DR and FTIR results indicated that the adsorption of arsenate ion occurred through ion exchange process. The MPA-Cell paper could have a potential use as low-cost but efficient commercial adsorbent for arsenate abatement from contaminated drinking water by both batch as well as semi-continuous operating systems. The MPA-Cell paper could purify ground water containing high level of arsenate., (Copyright © 2018. Published by Elsevier B.V.)

In the present study, α-glucosidase (α-Glu) was immobilized on the chitosan-modified cellulose filter paper (CFP/CS). For α-Glu immobilization, glutaraldehyde (GA) was used as a coupling agent. CFP, environmentally friendly and commercially available with low cost, will avoid the tedious procedure for synthesizing immobilization carrier. In addition, the CFP/CS-immobilized α-Glu can be directly taken out from the reaction mixture after an enzymatic reaction. This makes the instantaneous separation of immobilized enzyme comes true and is convenient to the subsequent study. Combined with capillary electrophoresis (CE), the CFP/CS-immobilized α-Glu was then used for enzyme kinetic and inhibition study. The CFP/CS-immobilized α-Glu exhibited enhanced pH and temperature tolerance. In addition, the performance of the CFP/CS-immobilized α-Glu was studied. Immobilized α-Glu exhibited excellent batch-to-batch reproducibility (RSD = 6.7%, n = 5) and improved reusability (71.0% of its initial activity after 10 repeated cycles). Finally, immobilized α-Glu was used to screen enzyme inhibitors from 11 traditional Chinese medicines (TCMs). The results showed that CFP/CS has potential development prospects as a novel enzyme immobilization carrier., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Solar-reflective thermal insulating coating (SRC) has received great attention because of its desired heat reflective properties and water repellency, which may impart high-value to cellulosic paper via industrially well-established surface coating process. However, the feasibility and possibility of surface application of SRC to cellulosic paper have not been explored. Herein, in the present work, SRC was designed/developed and subsequently used in the surface application to cellulosic paper. Effect of feeding level of titanium dioxide nanoparticles (nano-TiO 2 ) on rheological behavior of the coating, as well as heat-reflective properties, water repellency and mechanical properties of the surface-coated paper was studied. Results showed that the as-obtained coating samples exhibited a notable shear-thinning behavior and displayed strong dependence of rheological behavior on nano-TiO 2 amount. Furthermore, the increased nano-TiO 2 amount appeared to induce the improved hemispherical emittance of coated paper. The coating weight was also found to exert a positive effect on the hemispherical emittance of coated paper. In addition, it was confirmed that the nano-TiO 2 addition played an important role in improving the water repellency and mechanical properties of coated paper., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In this study, we have attempted to extract cellulose fiber from newspaper waste for circular economy project. Cellulose was successfully extracted from newspaper waste with high purity. It was further developed as a composite with Fe 3 O 4 powder. 10-30 wt% of Fe 3 O 4 was synthesized from conventional synthetic route and it was uniformly distributed into cellulose suspension. The composite was prepared by freeze-dry technique in order to remove water and create the porosity. X-ray diffraction and thermogravimetric analysis were employed to characterize the structural and thermal properties of composite. Scanning electron microscope with energy dispersion analysis can be confirmed that uniformity of cellulose and the existence of Fe 3 O 4 powder. Frequency dependence of dielectric properties was used to imply the polarity enhancement of composite. Preliminary adsorption of composite as adsorbent material for Congo red was investigated., (Copyright © 2018 Elsevier B.V. All rights reserved.)

This study focusses on the in-situ production of bacterial cellulose in recycled pulps to increase the quality of fibers in the suspension. The effect of different dosages of the upgraded pulp on the mechanical, physical and optical properties of handsheets was assessed. Papers produced with pulps cultivated in agitation exhibited increments in both tensile and tear indexes of 12.2% and 14.2%, respectively. Thus, flexibility of the paper was also improved. On the other hand, pulps enhanced with static culture fail to improve tensile index of paper, while tear index was increased by 12.4%. The production mechanism for both types of culture was proposed. In agitated culture, bacteria were found to coat the primary fibers, improving their quality. In the case of static culture, heterogeneous systems were observed since recycled fibers tended to sediment while bacteria moved to the surface of the culture broth in search of oxygen. Hence, the in situ production of BC with recycled fibers can, therefore, be an alternative to replace conventional paper strengthening agents. The results attained indicate that the in-situ production of upgraded pulps can be implemented in paper mills cultivating pulp streams sterilized through low cost, non-exhaustive operations, such as ozone or ultraviolet radiation., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Driven by the environmental benefits that bio-bleaching could bring, the interest in xylanase has received enormous attention and hence, the search of xylanase with properties like no cellulase activity, function at elevated temperatures and pH continues. The present study reports the production of extracellular xylanase from Aspergillus nidulans using waste agro-residues as substrate. The optimum temperature (60 °C) and pH (9.0), classified the xylanase as thermo and alkali tolerant. The addition of salt of Mn 2+ increased the xylanase activity to almost double; however, these ions were unable to protect the enzyme from thermal inactivation. The FTIR spectra of bamboo pulp treated with this xylanase, revealed reduction in lignin as evident from reduced peak intensity coupled with the reduction in kappa number. The SEM image of enzyme treated pulp, exhibited dissociation in fibers exposing the internal structure with slight roughness. Swelling was also observed there by increasing its thickness which eventually helped in improving its physical properties. The bleaching efficacy of indigenous xylanase as indicated in this study, has established its competence as a promising candidate for pre-treating the bamboo pulp., (Copyright © 2018. Published by Elsevier B.V.)

Bacterial cellulose is a biological macromolecule synthesized by bacteria of high purity and crystallinity. Bacterial cellulose nanofibers (BCNF) have been produced by soft homogenization and added to a recycled pulp to improve its quality. The benefits of BCNF on mechanical, physical and optical paper properties have been quantified and the retention mechanism of the BCNF in the paper network has been proposed. The use of BC to improve paper strength is usually limited by the decrease of tear index. The novelty of this work is that these two effects are decoupled by the addition of BCNF of low fibrillation (35.2%). In this way, some BCNF clusters are produced together with the individual nanofibers. Thus, with the addition of 3% BCNF, tensile and tear indexes as well as strain at break were improved by 11.1, 7.6, and 66.8%, respectively. Furthermore, the clusters were retained in the fiber network not only by hydrogen bonding, but also by physical retention within the gaps. Therefore, the addition of BCNF not only increases the mechanical properties of paper but also makes the handsheets more flexible and facilitates filler retention., (Copyright © 2018 Elsevier B.V. All rights reserved.)

A facile approach utilizing synthesis of cobalt nanoparticles in green polymers of chitosan (CS) coating layer on high surface area cellulose microfibers of filter paper (CFP) is described for the catalytic reduction of nitrophenol and an organic dye using NaBH 4 . Simple steps of CFP coating with 1wt% CS aqueous solution followed by Co 2+ ions adsorption from 0.2M CoCl 2 aqueous solution were carried out to prepare pre-catalytic strips. The Co 2+ loaded pre-catalytic strips of CS-CFP were treated with 0.19M NaBH 4 aqueous solution to convert the ions into nanoparticles. Successful Co nanoparticles formation was assessed by various characterization techniques of FESEM, EDX and XRD analyzes. TGA analyses were carried out on CFP, CS-CFP, and Co-CS-CFP for the determination of the amount of Co particles formed on the CS-FP, and to track their thermal properties. Furthermore, we demonstrated that the Co-CS-CFP showed an excellent catalytic activity and reusability in the reduction reactions a nitroaromatic compound of 2,6-dintirophenol (2,6-DNP) and brilliant cresyl blue (BCB) dye by NaBH 4 . The Co-CS-CFP catalyzed the reduction reactions of 2,6-DNP and BCB by NaBH 4 with psuedo-first order rate constants of 0.0451 and 0.1987min -1 , respectively., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The main goal of this work was to reinforce softwood pulp (SP) with bacterial cellulose (BC) to generate a sustainable biocomposite. BC is a nanocellulose, which was anticipated to increase interfacial adhesion between the cellulosic fibers and BC. The organism used was Gluconacetobacter xylinus, which was incubated in a static Hestrin-Schramm culture at 28°C for 14days. The specimens of BC, SP and the reinforced SP with BC were characterized using X-ray diffraction (XRD), FT-IR, FESEM, and physico-mechanical testing. The crystallinity index was found to be 83 and 54% for BC and SP, respectively. FT-IR spectra showed that the composition of BC was fully different from that of SP fibers. Based on FESEM images, one can conclude that BC and softwood fibers do form a good combination with a nonporous structure. BC fibers fill in among the softwood fibers in the sheet. The physical and mechanical properties showed that as the dosage of BC increased, the properties of tensile index, tear index, and burst index greatly improved, while the porosity and the elongation decreased. The reason for the improved mechanical properties can be attributed to the increase of interfibrillar bonding which reduced porosity. This would be due to the high aspect ratio of BC that is capable of connecting between the cellulosic fibers and BC nanofibers, enhancing a large contact surface and therefore producing excellent coherence. This study suggests that BC could be a promising material for reinforcing composites at low loading., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The use of non-wood fibers in the paper industry has been an economical and environmental necessity. The application of dry-strength agents has been a successful method to enhance the strength properties of paper. The experimental results evidencing the potential of chitosan and cationic starch utilization in bagasse paper subjected to hot water pre-extraction has been presented in this paper. The research analyzes the surface properties alterations due to these dry-strength agents. Inverse gas chromatography was used to evaluate the properties of surface chemistry of the papers namely the surface energy, active sites, surface area as well as the acidic/basic character. The results of the study revealed that the handsheets process causes surface arrangement and orientation of chemical groups, which induce a more hydrophobic and basic surface. The acid-base surface characteristics after the addition of dry-strength agents were the same as the bagasse handsheets with and without hot water pre-extraction. The results showed that the dry-strength agent acts as a protecting film or glaze on the surfaces of bagasse paper handsheets., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Plant proteins are used - for the first time - in this work as bulk binders for cellulosic fibers in paper composites. Soy bean protein and wheat gluten were denatured by two methods, namely by: urea+NaOH and by urea+NaOH+acrylamide. Addition of increased amounts of the denatured proteins resulted in a significant increase in all paper strength properties. Soy protein led, in addition, to a remarkable enhancement in opacity. The use of proteins increased kaolin retention in the paper composites, while keeping the paper strength higher than the blank protein-free paper. The results show that plant proteins are favorable than synthetic adhesives; because they are biodegradable and do not cause troubles in paper recycling i.e. they are environmentally friendly., ((c) 2010 Elsevier B.V. All rights reserved.)

Colored paper is an important industrial paper grade that has applications in various industrial sectors. The increase in coloring efficiency is a key in decreasing the use of dyes, thus can be considered as a "green" process concept; the coloring efficiency depends on the dye retention and dispersion. This work explores the use of nanocellulose, specifically, TEMPO-oxidized cellulose nanofibers (TOCNF), on the coloring efficiency of the preparation of colored paper. Two dyes (i.e. direct blue GL and reactive red 195 (RR195)) were used. Thanks to the large specific surface area and abundant active sites of TOCNF, its use largely improves the direct blue GL retention during the process. The coloring difference (∆E* ab) reached 5.334 with the addition of 13.6 wt% TOCNF and 1.8 wt% direct blue GL in the pulp furnish. The functional group in the dye is a vital factor in determining the dye retention when one chooses TOCNF to enhance the coloring efficiency in the production of colored paper. Furthermore, TOCNF significantly improved the strength properties of both direct blue GL and RR 195 dyed papers. This work demonstrates the potential of nanocellulose in the production of colored paper in improving the coloring efficiency, thus decreasing the environmental impact of the manufacturing process. [Display omitted] • Nanocellulose (i.e. TOCNF) adopted for colored paper preparation • Coloring efficiency improved by TOCNF due to the dye retention improvement • -COO− in TOCNF deteriorating its combination with negatively-charged dye [ABSTRACT FROM AUTHOR]