Search

Tannic acid (TA) is a natural compound studied as the cross-linker for biopolymers due to its ability to form hydrogen bonds. There are different methods to improve its reactivity and effectiveness to be used as a modifier for biopolymeric materials. This work employed plasma to modify tannic acid TA, which was then used as a cross-linker for fabricating collagen/gelatin scaffolds. Plasma treatment did not cause any significant changes in the structure of TA, and the resulting oxidized TA showed a higher antioxidant activity than that without treatment. Adding TA to collagen/gelatin scaffolds improved their mechanical properties and stability. Moreover, the obtained plasma-treated TA-containing scaffolds showed antibacterial properties and were non-hemolytic, with improved cytocompatibility towards human dermal fibroblasts. These results suggest the suitability of plasma treatment as a green technology for the modification of TA towards the development of advanced TA-crosslinked hydrogels for various biomedical applications., Competing Interests: Declaration of competing interest Authors declare no conflict of interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

In this study, thin films based on hyaluronic acid (HA) with tannic acid (TA) were investigated in three different weight ratios (80HA/20TA, 50HA/50TA, 20HA/80TA) for their application as materials for wound healing. Surface free energy, as well as their roughness, mechanical properties, water vapor permeability rate, and antioxidant activity were determined. Moreover, their compatibility with blood and osteoblast cells was investigated. The irritation effect caused by hyaluronic acid/tannic acid films was also considered with the use of are constructed human epidermis model. The irritation effect for hyaluronic acid/tannic acid films by the in vitro method was also studied. The low surface free energy, surface roughness, and antioxidant activity presented by the obtained films were examined. All the tested compositions of hyaluronic acid/tannic acid films were hemocompatible, but only films based on 50HA/50TA were fully cytocompatible. Regarding the potential implantation, all the films except 80HA/20TA showed appropriate mechanical properties. The specimens did not exert the irritation effect during the studies involving reconstructed human epidermis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

In this work, chitosan/caffeic acid mixtures in the weight ratios of 80/20 and 50/50 were used to obtain thin films enriched with poly(ethylene glycol). It was hypothesized that the presence of caffeic acid indicates the antibacterial properties of the materials (i) and that poly(ethylene glycol) acts as a films modifier (ii). The results showed that by poly(ethylene glycol) addition, the surface free energy as well as mechanical and thermal properties were improved. Moreover, water vapor permeability was observed. All the tested materials showed antioxidant properties in the range of approximately 90%. They also showed antibacterial effectiveness against both Gram-positive and Gram-negative bacteria. The most appropriate material for the application as packaging was composed of chitosan and caffeic acid mixed in a 50/50 weight ratio with 20% PEG addition., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

The aim of this study was to isolate biofilm-forming bacteria that are capable of degrading polyhydroxybutyrate (PHB) with polyhexamethylene guanidine (PHMG) derivatives. The three types of derivatives incorporated in PHB and their concentration affected the biodegradability of the tested films in both water and compost. The PHMG derivative granular polyethylene wax at the highest concentration significantly inhibited BOD in both environments. At the same time, in water, PHB with PHMG stearate at 1% concentration was also found to inhibit biodegradation but to a lesser extent than PHMG polyethylene wax granulate. Analyzing the values of biofilm abundance and their hydrolytic activity in water, low concentrations of PHMG derivatives (0.2 and 0.6%) slightly inhibited biofilm abundance on the surface of the tested composites. Only granular polyethylene wax PHMG (at 1% concentration) significantly reduced biofilm formation and hydrolase activity in the compost to the greatest extent. Bacteria from biofilm were isolated and identified. Based on the 16S rRNA gene sequence, the strains belong to Bacillus toyonensis HW1 and Variovorax boronicumulans HK3. Introduction of the tested isolates to the environment can enhance composites degradation. However, this requires further research., (Copyright © 2021. Published by Elsevier B.V.)

High utilization of thermoplastic polymers with low degradation rates as packaging materials generates a large amount of waste. Therefore, it should be replaced by natural polymers that can be degraded by microorganisms. In this paper, chitosan (CTS)/tannic acid (TA) materials in the weight ratios of 80CTS/20TA and 50CTS/50TA were prepared as potential packaging materials. The results showed that these materials were similarly degraded in soil and compost. However, in comparison to 50CTS/50TA, 80CTS/20TA was slightly better degraded in soil. After 14 days of biodegradation, the chemical structure of materials was changed resulting from adhesion of the microorganisms. The smallest changes were observed on 80CTS/20TA film. Bacterial species were collected and identified from materials after the degradation process. Microorganisms with the highest hydrolytic activity were chosen for the degradation study. Biodegradation and hydrolytic activity were observed only in a few strains, which indicate difficulties in material degradation. Soil bacteria degraded the films better than bacteria isolated from the compost. This study showed also that consortia of bacteria added to soil and compost had a positive effect on the biodegradation of the tested materials and increased the biodegradation of these materials in the studied environments., (Copyright © 2021. Published by Elsevier B.V.)