Search

Active packaging films based on kefiran-gelatin were developed and characterized using Zhumeria majdae essential oil nanoemulsion (ZMEO-NE) at concentrations of 0 (control), 1, 2 and 3 %. The main compounds of the essential oil (EO) of Zhumeria majdae (ZM) plant were linalool (61.44 %) and camphor (20.67 %). Adding the ZMEO-NE to the films decreased permeability to water vapor (from 7.82 × 10 -7 to 4.09 × 10 -7 g·m/m 2 ·Pa·h), ultimate tensile strength (from 38.44 to 33.48 MPa), percentage of light transmission, and increased thickness (from 0.085 to 0.121 mm), opacity (from 2.11 to 2.79), and elongation at break (from 19.97 to 34.73 %), and changed color parameters. The establishment of hydrogen bonds between the ZMEO-NE and polymer network was confirmed. The ZMEO-NE decreased the storage modulus and glass transition temperature. Distinct variations in the films' surface morphology and a reduction in the crystalline structure were observed due to the presence of the ZMEO-NE. Elevating the concentration of the ZMEO-NE increased antioxidant capabilities of the films. The films incorporating the ZMEO-NE exhibited notable antibacterial efficacy against Staphylococcus aureus (reductions ≥4 log CFU/cm 2 ) and Escherichia coli (reductions ≥2 log CFU/cm 2 ) bacteria. The films also demonstrated suitable antifungal properties during storage of sponge cakes for 16 days., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, kefiran was esterified with octenyl succinic anhydride (OSA). The esterification reaction variables including pH (8.5), kefiran concentration (5% (w/w)), OSA concentration (12% (w/w)), temperature (~38 °C) and reaction time (~80 min) were found as optimum points to achieve the maximum degree of substitution (DS) (0.041 ± 0.002). Kefiran-OSA samples with DS of 0.021 (FDA suggested DS) and 0.041 (maximum DS) were prepared and compared with unmodified kefiran in all experiments. FTIR and 1H NMR spectroscopies proved the grafting of OSA on kefiran structure. XRD analysis revealed that with increase in DS, the physical state of kefiran to be more amorphous. In addition, the esterification modification led to a decrease in the degradation temperature and an increase in the apparent viscosity based on the obtained data from thermal analysis and viscosity measurement. The results of the foaming and emulsifying properties confirmed the improvement in surface properties of the modified kefiran. The frequency sweep test illustrated that with an increase in DS, the viscoelastic behavior of the kefiran cryogels to be more viscous. It can finally be stated that the modification with OSA was a high potential strategy to extend the industrial applications of the kefiran. [ABSTRACT FROM AUTHOR]

Kefiran is a water-soluble polysaccharide well recognized as a bioactive ingredient to enhance nutritional and health-promoting features. Also, some therapeutic properties have made this macromolecule an active ingredient in ointments and oral anti-inflammatory drugs. However, the details of the molecular and cellular aspects of these effects have not been addressed. In this study, lipopolysaccharides (LPS)-induced monocytes, lymphocytes, and monocyte-derived dendritic cells (MDDCs) as representative cells for both innate and adaptive immunity were treated with kefiran for 2 h. Kefiran had an anti-inflammatory effect on monocytes to reduce pro-inflammatory cytokines, interleukin 1 β (IL-1β) & tumor necrosis factor α (TNF-α), as well as nuclear factor kappa b (NF-kb). However, it did not affect lymphocytes. Overexpression of Toll-like receptor 4 (TLR4) in LPS-induced cells was not reduced after kefiran treatment. Kefiran balanced MDDCs secretion of pro/anti-inflammatory cytokines by reducing and enhancing the expression of IL-1β and interleukin 10 (IL-10), respectively. Also, kefiran decreased the number of apoptotic immature MDDCs and promoted dose-dependent phagocytosis capacity of MDDCs. According to the results of the current study, it may be concluded that the immunomodulatory effects of kefiran are due to antagonist against innate immune receptors especially TLR4. The results of this study can be used as a guide to developing kefiran-based non-aggressive anti-inflammatory drugs. Furthermore, understanding the immunobiological effects of kefiran on monocytes and lymphocytes was another outcome of this study. Unlabelled Image [ABSTRACT FROM AUTHOR]

Abstract Biodegradable kefiran films, containing different concentrations of Al 2 O 3 (alumina) (1, 3 and 5% w/w), were prepared by casting method and their physical, mechanical, and thermal properties were studied. Based on the results, the increase of the nano-Al 2 O 3 content led to a decrease in the water vapor permeability, moisture content, moisture absorption, and water solubility. The addition of nanoparticles did not affect the lightness of the films significantly (P > 0.05). The mechanical tests revealed that the addition of Al 2 O 3 nanoparticles to the kefiran films significantly increased both tensile strength and elastic modulus, while had no effect on the elongation at break (P > 0.05). Thermogravimetric analysis (TGA) indicated the improvement of the films' thermal stability by adding alumina. The results of X-ray diffraction (XRD) confirmed the effect of Al 2 O 3 on the semi-crystalline structure of kefiran. Scanning electron microscopy (SEM) images approved a uniform distribution of nanocomposites containing 1 and 3% w/w of Al 2 O 3. The obtained results suggested that Al 2 O 3 was able to improve the characteristics of the kefiran-based films for using as food packaging material. Highlights • Kefiran/Al 2 O 3 nanocomposite films were prepared by solution casting method. • Al 2 O 3 caused to increase water barrier and mechanical properties of kefiran films. • Uniform distribution of Al 2 O 3 nanoparticles at lower concentrations was approved. • Al 2 O 3 had different effects on mechanical properties at different concentrations. • Kefiran films with up to 3% Al 2 O 3 are suitable for food packaging applications. [ABSTRACT FROM AUTHOR]

This paper reports on an experiment in which starch/kefiran/TiO 2 (SKT)-based bio-nanocomposite films were developed and modified by photo-chemical reaction. In so doing, film-forming solutions were exposed to ultraviolet A (UV-A) for different times (1, 6, and 12 h). The obtained results indicated that increasing UV-A exposure time brought about an increase (≈14.9%) in the tensile strength of bio-nanocomposites. However, elongation at break and Young's modulus of irradiated film specimen decreased (≈32%, ≈12%, respectively) by increasing UV-A exposure time, and the moisture-sensitive parameters of specimen decreased using UV-A irradiation. According to the results, the functional properties of irradiated bio-nanocomposite are depended on the ratio of cross-linkages between polymer chains and the potentially produced mono and disaccharide by UV-A. [ABSTRACT FROM AUTHOR]

Environmental concern about synthetic polymers and nanoparticles bring about development of the green bionanocomposite. Nanocellulose (NC) as safe nanofiller was prepared from beer industrial residues by acid hydrolysis in this study. ATR–FTIR spectrum showed no change in chemical structure of kefiran and NC after mixing. However, mechanical, visual, and WVP properties of kefiran/NC films improved with NC, but thermal properties and water sensitivity of them declined, simultaneously. [ABSTRACT FROM AUTHOR]

In this study, the effect of different γ-ray dosages (3, 6, and 9 kGy) on the functional properties of kefiran biopolymer was investigated. The obtained results showed that increasing γ-ray dosage brought about an increase in the tensile strength of film specimens up to three-times. However, elongation at break, and tensile energy to break of γ-irradiated kefiran films decreased in the wake of increasing γ-ray dosage. γ-Irradiation could improve surface hydrophobicity, sensitivity of kefiran film specimens to water, and water vapor permeability, but yellowness of films increased, simultaneously. XRD spectrum confirmed increased crystallinity of γ-irradiated films. Melting point of films was constant but glass transition temperature decreased drastically at high γ-ray dosage (9 kGy). ATR-FTIR analysis confirmed that γ-ray engendered no changes in chemical functional groups. According to the result, a mechanism was proposed to percept the effects of γ-irradiation on kefiran biopolymer and its role on the functional properties of kefiran film. Hence, the functional properties of kefiran films were depend on the ratio of cross-linkages between polymer chains and produced mono and disaccharide by γ-irradiation. [ABSTRACT FROM AUTHOR]

In this study, we investigated the effect of ZnO nanoparticles (ZN) as a UV-protective agent of kefiran biopolymers. Our results showed that with increasing ZN content, the tensile strength, elongation at break, and tensile energy to break the kefiran film and nanocomposites also increased. Kefiran nanocomposites with a ZN content higher than 2% produced a UV-protective film with good visual properties, low sensibility to water, and low water-vapor permeability. The thermal properties of all specimens, analyzed by DSC, showed that the ZN content had a negative effect on T g and a positive effect on nanocomposites’ melting point. TEM, SEM micrography and XRD spectrum analysis confirmed the hypothesis that ZNs act like a ball bearing, making movement of kefiran chains easier and increasing elongation at break, while simultaneously decreasing the T g of kefiran nanocomposites. [ABSTRACT FROM AUTHOR]

In this study, we report the first successful production of kefiran nanofibers through electrospinning process using distilled water as solvent. For this purpose, kefiran was extracted from cultured kefir grains, and homogenous kefiran solutions with different concentrations were prepared and then electrospun to obtain uniform nanofibers. The effect of main process parameters, including applied voltage, tip-to-collector distance, and feeding rate, on diameter and morphology of produced nanofibers, was studied. Scanning electron microscopy (SEM) and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy were used to characterize electrospun mats. Rheological behavior of the kefiran solution was evaluated via a cone and plate rheometer too. The results exhibited that diameter of kefiran nanofibers increased with increasing polymer concentration, applied voltage, and polymer feeding rate, while tip-to-collector distance did not have significant effect on nanofiber diameter. ATR-FTIR spectra showed that kefiran has maintained its molecular structure during electrospinning process. Flow curves also demonstrated shear thinning behavior for kefiran solutions. [ABSTRACT FROM AUTHOR]

Abstract: Biodegradable kefiran-whey protein isolate (WPI)-titanium dioxide (TiO2) blend films were developed and characterized as a function of incorporating amount of TiO2 nanoparticles (1, 3 and 5% wt.). Results showed that the water vapor permeability, moisture content, moisture absorption and water solubility decreased by increasing the nano-TiO2 content. Mechanical tests revealed the plasticizing effect of TiO2 nanoparticles on the kefiran-WPI-TiO2 film. Addition of TiO2 nanoparticles to kefiran-WPI films significantly decreased tensile strength and Young's modulus, while increased its elongation at break. Differential scanning calorimetry data indicated that the glass transition temperature significantly changed by adding nano-TiO2. X-ray diffraction analysis also demonstrated that crystal type in kefiran-WPI was not affected by incorporation of TiO2 nanoparticles. A uniform distribution at 1 and 3% wt. loading levels of TiO2 nanoparticles was observed using scanning electron microscopy (SEM) micrographs. [Copyright &y& Elsevier]

Abstract: The rheological properties of kefiran film-forming solutions, as well as the structural characterisation of the resulting films, were investigated as a function of various plasticizer types. The behaviours of the storage (G′) and loss (G″) moduli as a function of frequency were typical of gel-like material, with the G′ higher than the G″. Kefiran-based films, which may find application as edible films, were prepared by a casting and solvent-evaporation method. Possible interaction between the adjacent chains in the kefiran polymer and various plasticizers was proven by Fourier-transform infrared spectroscopy (FT-IR). The crystallinity of plasticized kefiran film was also analysed using X-ray diffraction (XRD); this revealed an amorphous-crystalline structure. These results were explained by the film''s microstructure, which was analysed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The present study has helped determine possible interactions of kefiran, plasticizer and water molecules in determining film properties. [Copyright &y& Elsevier]

Abstract: New edible composite films based on kefiran and oleic acid (OA) at the ratio of 15, 25, and 35% (w/w) were prepared using emulsification with the aim of improving their water vapour barrier and mechanical properties. Film-forming solutions were characterized in terms of rheological properties and particle-size distribution. The impact of the incorporation of OA into the film matrix was studied by investigating the physical, mechanical, and thermal properties of the films. The water vapour permeability (WVP) of the emulsified films was reduced by approximately 33% by adding OA. The mechanical properties of kefiran films were also affected by adding OA: tensile strength was diminished, and elongation increased considerably. Differential scanning calorimetry showed that the glass transition temperature (T g) of the kefiran film was −16°C and was not considerably affected by adding OA. Therefore, OA could be incorporated into these films for some food-technology applications that need a low affinity toward water. [Copyright &y& Elsevier]

In this study, the effect of UV-C light on starch-kefiran-ZnO (1%) primary solution in different exposure times (1, 6, and 12 h) was investigated. Starch-kefiran-ZnO (SKZ) solution was modified by UV irradiation in different time periods. Also, nano-ZnO (ZN) was used as a photo-initiator and reinforcement agent, simultaneously. Mechanical properties of the films were affected after the UV treatment. The tensile strength increased because of the enhanced interaction between the biopolymer mixture and nano filler but elongation at break was decreased. WVP decreased about 16% and dwindled to 2.08 × 10 -10  g m -1  s -1  Pa -1 . Water related properties (i.e. moisture content, moisture absorption, and solubility in water) of the films decreased by UV-C exposure. On the other hand, UV absorption and water contact angle increased because of the better distribution of the ZNs in polymer matrix after the UV exposure. Better compatibility of the ZNs and the biopolymer matrix after UV treatment was confirmed by the SEM micrographs. Comparison of FTIR spectra before and after UV exposure showed slight shifts. It was due to some formed or deformed bonds inside of the nanocomposite matrix. The modified SKZ by UV could be an appropriate process to sanitizing and food packaging concurrently. As well as UV can be used as a nano-ZnO compatibilizer in food packaging materials., (Copyright © 2018. Published by Elsevier B.V.)

Biodegradable kefiran-whey protein isolate (WPI)-titanium dioxide (TiO2) blend films were developed and characterized as a function of incorporating amount of TiO2 nanoparticles (1, 3 and 5% wt.). Results showed that the water vapor permeability, moisture content, moisture absorption and water solubility decreased by increasing the nano-TiO2 content. Mechanical tests revealed the plasticizing effect of TiO2 nanoparticles on the kefiran-WPI-TiO2 film. Addition of TiO2 nanoparticles to kefiran-WPI films significantly decreased tensile strength and Young's modulus, while increased its elongation at break. Differential scanning calorimetry data indicated that the glass transition temperature significantly changed by adding nano-TiO2. X-ray diffraction analysis also demonstrated that crystal type in kefiran-WPI was not affected by incorporation of TiO2 nanoparticles. A uniform distribution at 1 and 3% wt. loading levels of TiO2 nanoparticles was observed using scanning electron microscopy (SEM) micrographs., (Copyright © 2014 Elsevier B.V. All rights reserved.)