Search

This study aimed to produce and characterize the microstructure and mechanical properties of dense polycrystalline bovine hydroxyapatite (DPBHA) bioceramics with 5% and 8% of TiO2 nanoparticles after final synthetization for future use in dental implants. Structural characterization was obtained from analyzes by Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscope, energy dispersive spectroscopy, and relative density and apparent porosity. The mechanical characterization was performed by measuring the fracture toughness after three‐point flexural strength (FS) test. The microstructural characterization results showed no secondary phase formation and nonhomogeneous nanoparticle dispersion in HA matrix. DPBHA/Np8% (2.9 ± 0.09 g/cm3) exhibited significantly greater density than DPBHA (2.7 ± 0.03 g/cm3) (p = 0.011) and DPBHA/Np5% (2.7 ± 0.05 g/cm3) (p = 0.041). DPBHA (0.9%) had the smallest porosity followed by DPBHA/Np8% (3.4%). DPBHA/Np5% (4.5%) exhibited the greatest proportion of pores. Pure HA (51.7 ± 10.3 MPa) and DPBHA/Np8% (47.4 ± 6.4 MPa) had significant greater FS (p < 0.001) than DPBHA/Np5% (28.8 ± 3.1 MPa). DPBHA (0.43 ± 0.01 MPa m1/2) and DPBHA/Np8% (0.40 ± 0.06 MPa m1/2) presented greater KIc than DPBHA/Np5% (0.23 ± 0.02 MPa m1/2) (p < 0.003; p < 0.007). In conclusion, 8% TiO2 nanoparticle addition to this synthesis would be a promising HA blend, as mechanical properties were similar, and the relative density/apparent porosity showed superior results than those of the DPBHA. [ABSTRACT FROM AUTHOR]