Search

Presence of shunt FACTS (Flexible Alternating Current Transmission System) device significantly affect the performance of protection system and may create security and reliability issues. This paper introduces a novel approach for zone identification in transmission line employing shunt FACTS devices such as Static Var Compensator (SVC) and Static Synchronous Compensator (STATCOM). The technique depends on the modified apparent impedance seen by the impedance relay for all possible operating conditions. In this technique the Support Vector Machine (SVM) is used for discriminating faulty zone (zone 1 or zone 2). In addition an optimization technique viz. Genetic Algorithm (GA) is used to optimize SVM parameters. A typical 230 kV system was simulated in PSCAD/EMTP software and the results show that the proposed scheme is secure, accurate and reliable under the wide variation in power system parameters like load angle, fault resistance, fault location, inception angle and compensation level. [ABSTRACT FROM AUTHOR]

Highlights: [•] The effect of Static Var Compensator (SVC) connected in transmission line on adaptive distance protection is studied. [•] The SVC is connected at three locations in transmission line. [•] Measured impedances by the relay with and without SVC is determined. [•] SVC connected at mid-point affects seriously on the characteristics of relay. [•] Discrete Fourier Transform (DFT) is used to estimate the phasors of the voltage and current at the relaying bus during fault. [ABSTRACT FROM AUTHOR]

• A novel single-end protection scheme for the compensated transmission line based on traveling waves. • Impact of SVC on traveling waves passing through a connection point of SVC. • Evaluates the effects of generated transients during faults resulted from SVC switching. • This article employed the game theory to discriminate the detected traveling waves. This paper proposes a novel single-end protection scheme for the compensated transmission line based on traveling waves and Game Theory. Initially, this study investigates the effects of Static VAR Compensator (SVC) on Traveling Waves (TW) passing through SVC location. Subsequently, it evaluates the impacts of SVC switching on conventional protections based on traveling wave theory. Following that, a single-end method to locate faults on compensated transmission lines with SVC is presented in this study. Moreover, Game theory was utilized to discriminate extracted TWs in this paper. In order to investigate the sensitivity of the proposed scheme regarding the extraction techniques of TW, two techniques, namely Mathematical Morphology Filter (MMF) and Discrete Wavelet Transform (DWT) have been used to process the signals in this study. The simulation studies using PSCAD software indicate that the proposed protection scheme is reliable and accurate for all possible types of faults on transmission lines with and without SVC. In addition, the proposed technique presents noise immunity. [ABSTRACT FROM AUTHOR]

• This method is only based on the current data in relay location. • The proposed method is completely analytical. • A negative-sequence based approach used to fault location estimation. This paper introduces an accurate fault location algorithm for double-circuit transmission lines compensated by Static Var Compensator (SVC). The proposed algorithm is based on the negative-sequence circuit of the transmission system and it depends only on the current data available from one end of the line. Since only magnitudes of current signals are required, there is no need for data synchronization. The proposed technique uses the COMTRADE fault files available from digital distance relays and it can effectively locate the all types of unbalanced faults, regardless the high fault resistance, effect of mutual coupling and SVC current injection information. As one formula can be used for all types of fault, classification of fault types and phase selection are not required. The shunt capacitances of the line are considered by utilizing the distributed parameters model of the transmission lines. The proposed algorithm is rigorously investigated for various fault scenarios in SVC compensated transmission system. The simulation cases in the MATLAB environment verifies that the proposed scheme has excellent performance. Test results are compared with a conventional fault location technique to illustrate the accuracy of the proposed algorithm. [ABSTRACT FROM AUTHOR]