Search

In this paper, the radial basis function neural network based on the orthogonal least squares (OLS-RBFNN) method is proposed for the first time for the calibration of the six-port receiver, which realises six-port accurate reception in the true sense. This algorithm overcomes the problems of an ageing circuit, narrow working frequency band and nonlinearity of the six-port receiver hardware. The RBFNN is a three-layer forward network, including an input layer, a hidden layer and an output layer. The transformation function of the hidden layer is the radial basis function. A six-port receiver test platform with an operating frequency band of 2.0–8.0 GHz is built to verify the performance of the six-port receiver based on OLS-RBFNN. The test signal is a 16-QAM signal with different bandwidths and different frequency bands. The test indicator uses error vector magnitude (EVM)， which represents the error between the received signal and the ideal signal sent. At last, the EVM of all tested data is less than 1.07%, and the best EVM is 0.57%. Therefore, the calibration accuracy of the OLS-RBFNN proposed in this paper is very high. [ABSTRACT FROM AUTHOR]

This paper introduces a hybrid multilevel inverter (MLI) with reduced switch count, which can generate higher output voltage level with minimum number of DC input sources. The operation of this proposed MLI is carried out with unequal DC sources to achieve the desired output voltage level. The reduced MLI output voltage is set to minimal total harmonic distortion (THD) with the help of modified JAYA (MJAYA) algorithm. A JAYA algorithm with improved steps by adopting an accelerating parameter has been proposed in this research work to obtain a faster convergence of the objective function. The MJAYA algorithm has provided the suitable switching angles for the proposed three-phase 15-level MLI and reduced the output voltage THD to 2.23%, which satisfies the standard set by IEEE-519. To prove the efficiency of this proposed modified algorithm, the comparative analysis is carried out through MATLAB program and Simulink tool using common JAYA and modified particle swarm optimisation algorithms. The performance and productivity of the proposed MLI have been investigated through simulation and experimental setups. [ABSTRACT FROM AUTHOR]

Most of the research on identifying and classifying signal models is limited to single signals such as AM, QAM or PSK, and there is a lack of research on the parameters of the identified signals. To make up for this deficiency, an OA (Optimality Confidence and Amplitude Ratio factor) algorithm model is proposed to identify and classify 13 kinds of modulation signals, including 2 kinds of analogue modulation signals (AM and FM), 11 kinds of signal digital modulation (M-SK and M-QAM). Based on the characteristics of the constellation diagram, Confidence and Amplitude Ratio factors are constructed to identify and classify signals with different parameters such as 'Format", "Centre Frequency" and "Sample Rate' and different modulation types. In addition, because of the mis-judgement and confusion problems in identifying classification signals, a three-layer optimisation algorithm is proposed to optimise the OA algorithm model. Numerical simulation results show that the comprehensive identification efficiency of the proposed optimisation algorithm is increased by 18.84%. [ABSTRACT FROM AUTHOR]

The position of MPP of a solar panel changes with changes in weather conditions such as radiation, temperature and partial Shadow. In such a situation, several local MPPs and one GMPP are created in the P-V curve, and the common methods of MPPT(P&O, IC,...) have converged due to the failure to recognise the local MPP. They cause a lot of losses to the photovoltaic system. Therefore, in this article, it has been tried to provide a new method of particle swarm optimisation with variable coefficients, which in combination with the perturb and observe method can reach the GMPP in the fastest possible time. In this proposed method, we first reach the convergence of the GMPP using the VCPSO method, and after converging to it, we go to the P&O method and use P&O until significant changes are made in the system, and if observed Variations To re-examine the GMPP, we return to the VCPSO algorithm. The results of the simulation of the efficiency of the proposed method show that this method was able to reach the GMPP in the shortest time, and the efficiency of the photovoltaic system increases and the effects of partial shading are reduced. [ABSTRACT FROM AUTHOR]