Search

In Egypt, the climate has a direct impact on the dried date fruit production. The traditional drying method or open sun drying (OSD) leads to pollution of the final product caused by sand-laden winds, rain, or animals and harmful insects, etc. This study is aimed at designing, implementing, and experimentally validating a solar dryer based on IoT technology and integrated with a PV system in Aswan, Egypt. The purpose of the dryer is to monitor and control the quality of the three most popular date fruit varieties and determine the most effective drying method, with an algorithm that operates the system automatically for optimal performance and high-quality products. The automatic solar dryer (ASD) significantly affects the final moisture content and color characteristics and reaches the equilibrium moisture content (EMC) at a faster rate for dried date samples compared to the OSD. The drying rate of ASD was 29.03% (Sakkoti), 31.04% (Malkabi), and 25.49% (Gondaila) higher than OSD. Also, the dried date fruit samples reached EMC on the ASD after 8 days for both Malkabi and Gondaila and 9 days for Sakkoti, while it took 14 to 15 days on OSD. The maximum open circuit voltage V oc , short circuit current I sc , and output power P output were 41.70 V, 8.84 A, and 365.09 W, respectively. All values of total color change ( Δ E ∗ ) after open-air drying of dry date varieties were higher than solar drying for both drying systems. This study can be then more helpful for producers of dried foods. [ABSTRACT FROM AUTHOR]

While energy production is highly dependent on fossil fuels, which consider the main source of global warming, biofuels would play a significant impact in diminishing such warming. In this paper, biooils were extracted from inedible seeds (Jatropha and Castor) using different continuous devices (solvents, screw presses, and hydraulic press-machines), aiming to achieve the highest oil's yield of improved extraction properties at reduced time and energy. A wide range of engine speeds of 35, 60, 85, 110, and 135 rpm and preheating temperatures of 100, 125, 150, 175, 200, and 250°C were extensively studied to find their impact on the extraction properties. Results proved the ability of the screw press machine to extract the highest biooil yields from Jatropha and castor seeds. The optimum yield of Jatropha and castor were achieved at an extraction temperature range of 150-175°C at a motor speed of 135 rpm and a temperature range of 200-250°C at a motor speed of 35 rpm, respectively. Noteworthy, the yield of extracted castor oil is potentially solidified at low temperatures <100°C, leading oil samples to become like a dough. In contrast, lowering the temperatures of the Jatropha seeds improved the physical and chemical properties of the extracted oil. At a certain temperature (e.g., 100°C), the properties of both extracted and diesel oils are quite similar, which can be used directly in diesel engines. [ABSTRACT FROM AUTHOR]

FACTS tools in modern power systems provide a vital solution to the problems of voltage deviation and fault ride-through (FRT) capability in electrical power systems especially during the integration of wind power. Many distinct journals highlight that the wind-driven squirrel cage generator (SCIG) still accounts for around 15% of operating wind generators so far. To enhance voltage stability and FRT capacity, this paper recommends a cost-effective static VAR compensator (SVC) which has a size rating of six MVAR, and this improves the efficiency of the electrical power system. Different events are considered in this study such as high turbulent wind speed, low turbulent wind speed, unsymmetrical faults, and symmetrical faults to validate the suggested option. Moreover, the suggested solution is compared with the static synchronous compensator (STATCOM) and a fixed capacitor to ensure that during the studied wind speed profiles and faults, voltage stability, reactive power consumption, and FRT capability are realized. An overall comparison among them is performed under all studied scenarios to summarize their benefits and impacts. The simulated results show the effectiveness and superiority of SVC in improving the operation of an integrated wind system based on a grid-linked SCIG and the performance of the power system. The modeling of SCIG, SVC, and STATCOM is designed by MATLAB/Simulink toolbox. [ABSTRACT FROM AUTHOR]