Search

• A mathematical model based on non-equilibrium formulation was established. • The simulation results show better accordance with the experimental results compared with the model based on equilibrium formulation. • The heat and mass transfer during the drying stage were analyzed. • The effects of different operating parameters on the drying time were investigated. Spray freeze drying has been expanding its influence in many fields. However, the long duration dramatically hinders its further development. A model established based on non-equilibrium formulation was established in this paper. The accuracy of the model proposed with that established based on equilibrium formulation was compared. And the history of temperature, vapor concentration and ice saturation were then investigated. Lastly, the effects of product thickness, particle diameter on the drying time were investigated. The simulation results reproduce well with the experimental data, and show a better agreement with the increase rate of experimentally measured temperature curve than that based on equilibrium formulation. In addition, the temperature increases from the bottom to the top region while the vapor concentration distribution presents the opposite trend. The ice saturation first obtains a slight increase and then decreases. Lastly, the drying time decreases as: (i) the product thickness decreases, (ii) the packing porosity increases and (iii) the chamber temperature increases. The mathematical model proposed in this paper could offer better understanding of the process and guide the design and optimization for the process. [ABSTRACT FROM AUTHOR]

• The desirable operating conditions to achieve high operational efficiency are obtained. • The performance of the IEC under different operating conditions is investigated. • The mathematical model is validated against published data. • The optimal dimensions that give good efficiency in climates with moderate humidity are highlighted. [Display omitted] This paper presents a study investigating and analyzing the effect of heat and mass exchanger (HMX) dimensions and the flow parameters on the indirect evaporative cooler (IEC) system's performance. For this purpose, a mathematical model based on heat and mass transfer concepts was developed, and the model was verified using experimental and simulation results from published papers. Simulations were performed based on different operating and structural conditions affecting the outlet air temperature, cooling capacity, coefficient of performance, and wet-bulb efficiency. Results showed that the optimal dimensions that give good efficiency in climates with moderate humidity, the length of the duct should be between 0.6 to 1.0 m , the width of the channel between 0.3 to 0.5 m , and the channel gap between 0.004 to 0.008 m. It has also been observed that the increasing working air velocity has a positive effect on cooling performance, and its velocity should not be less than 1 m / s. As for increasing the product air velocity, it reduces the heat exchange period, which is undesirable, so it should not exceed 1 m / s. The prescribed flow rate ratio between product and working air should be 0.3 to 0.5. This analysis provides desirable operating conditions to achieve high operational efficiency as well as optimal dimensions for designing such a cooler. [ABSTRACT FROM AUTHOR]

Despite the fact that the conventional one-dimensional model for counter-flow spray separation tower is advanced in reasonable accuracy as well as time and computational resources saving, it fails to describe the physical processes in details. In this paper, the concept of supersaturated state of the moist air was introduced, then a new sectional one-dimensional model was developed with a detailed derivation. A prototypic apparatus was set up and the reliability of the model was validated by the experimental study. When predicting the outlet solution temperature and outlet moist air wet bulb temperature, the relative errors would be more pronounced with a bigger heat and mass transfer driving potential, but they would not exceed 3.59% and 9.54% respectively under the experimental conditions. The simplifying assumptions, the ignored heat and mass transfer at cyclone region and the measuring errors are mainly blamed for the predicted errors. An in-depth heat and mass transfer investigation was conducted with the help of the validated model by studying the profiles of humidity ratio and moist air dry bulb temperature. The proposed model succeeded in capturing the state transformation of the air flow along the axis of the tower and the effects of the operating parameters on the process profiles are discussed. [ABSTRACT FROM AUTHOR]

In this paper, a numerical study of heat and mass transfer in counter-flow indirect evaporative air coolers is presented using an approach proposed by previous work. The mathematical model equations of continuity, momentum, energy and concentration are solved by the finite volume method to obtain the value of primary outlet dimensionless temperature. This mathematical model developed is validated against published data acquired from literature. The key target of presented analysis is to develop a performance correlation based on five dimensionless factors: ratio of channel length to half width of secondary air channel, ratio of water to secondary air mass flow rate, primary air inlet Reynolds number, secondary air inlet dimensionless temperature and water film inlet dimensionless temperature. Numerical simulations are performed by changing the value of each dimensionless factor under a constant value for other parameters. The simulation results are regressed to obtain the empirical constants of the correlation. The value of outlet dimensionless temperature is varied from 0.47 to 0.92. The developed correlation can predict the performance of the counter-flow indirect evaporative air coolers within a discrepancy of 12.6%. The correlation would be helpful to provide a simpler equation to improve the calculation speed within the engineering allowable accuracy range. [ABSTRACT FROM AUTHOR]

In this paper, mixed convection of non-Newtonian nanofluid, using the Buongiorno’s mathematical model in a cavity has been analyzed by Finite Difference Lattice Boltzmann method (FDLBM). The cavity is filled with nanofluid which the mixture shows shear-thinning behavior. The Prandtl number is fixed at Pr = 1. This study has been performed for the certain pertinent parameters of Richardson number ( Ri = 0.001, 0.01, and 1), buoyancy ratio number ( Nr = 0.1, 1, and 20), power-law index ( n = 0.2–1), Lewis number ( Le = 1, 5, and 10), Thermophoresis parameter ( Nt = 0.1, 0.5, 1), and Brownian motion parameter ( Nb = 0.1, 1, 5). Results indicate that the augmentation of the power-law index causes heat and mass transfer to drop at Ri = 0.001 and 0.01. The drop of Richardson number from Ri = 1 to 0.001 enhances heat and mass transfer for various power-law indexes. The increase in the Lewis number augments mass transfer while it causes heat transfer to drop. The rise of the Thermophoresis and Brownian motion parameters ameliorates mass transfer and declines heat transfer significantly. The augmentation of buoyancy ratio number enhances heat and mass transfer. [ABSTRACT FROM AUTHOR]

The paper is focuses on the numerical simulation and analysis of coupled heat and mass transfer under ice formation conditions in the cross-flow plate heat exchanger. The simulation is performed using the original mathematical model. The presented model was validated against experimental data. The obtained results showed satisfactory agreement with the data obtained from the experimental measurements. Numerical simulation reveals many unique features of considered heat exchanger connected with the heat and mass transfer occurring in the return air channel under ice formation conditions. The results of computer simulation showed that the efficiency gains are sensitive to various inlet conditions, and allow for estimation of the safe operating conditions for different inlet return airflow parameters, based not only on the exhaust air temperature but also on its relative humidity and different thermal efficiency of the exchanger. Several goals were achieved, including: establishing the most unfavorable operating conditions (from the standpoint of ice formation on the plate surface of the return air channels) for cross-flow plate heat exchanger, which correspond to the inlet value of the return airflow dew point temperature equaled to 0 °C, impact of the ice formation on temperature effectiveness, impact of inlet relative humidity on temperature effectiveness and safe operating conditions and safe operating conditions for variety of inlet exhaust air parameters. [ABSTRACT FROM AUTHOR]

This paper presents a numerical study of heat and mass transfer in indirect evaporative air coolers with four air flow patterns: parallel-flow, counter-flow, cross-flow and regenerative. The numerical simulation was performed on the basis of original two-dimensional heat and mass transfer models (in the case of cross-flow heat exchanger the model was 3D). The mathematical models developed were validated against published experimental data presented in Appendix A . It was established, that heat and mass transfer processes in the wet channels of counter-flow, cross-flow and regenerative indirect evaporative coolers are characterized by creation of two particular heat and mass transfer zones. Detail analysis of the temperature and humidity ratio distributions and boundary conditions, characterizing the coupled heat and mass transfer process in each of these determined zones, revels the violation of the Lewis relation unity under a certain inlet and operation conditions. A theoretical method for estimating the Lewis factor was proposed. Using the developed models the thermal performances of the conventional designs of indirect evaporative air coolers were analyzed numerically and preferable climatic zones for considered heat exchanger were established. Four novel heat exchangers utilizing the advantages of the basic cycles heat exchangers were presented. [ABSTRACT FROM AUTHOR]

This paper investigates a mathematical simulation of the heat and mass transfer in the two different Maisotsenko Cycle (M-Cycle) heat and mass exchangers used for the indirect evaporative cooling in different air-conditioning systems. A two-dimensional heat and mass transfer model is developed to perform the thermal calculations of the indirect evaporative cooling process, thus quantifying the overall heat exchangers’ performance. The mathematical model was validated against the experimental data. Numerical simulations reveal many unique features of the considered units, enabling an accurate prediction of their performance. Results of the model allow for comparison of the two types of heat exchangers in different applications for air conditioning systems in order to obtain optimal efficiency. [ABSTRACT FROM AUTHOR]

Liquid-to air membrane energy exchangers (LAMEEs) are novel membrane based energy exchangers that allow simultaneous heat and moisture transfer between salt solutions and air streams. The similarity between a small-scale (2.5 L/s) LAMEE and a full-scale (100 L/s) LAMEE is investigated, both experimentally and numerically, in this paper. Dimensional analysis of the coupled heat and mass transfer equations in the air-side, solution side and membrane of the LAMEE shows that five important dimensionless parameters affect the performance of LAMEEs: (1) number of heat transfer units, NTU, (2) thermal capacity ratio, Cr*, (3) number of mass transfer units, NTUm, (4) mass flow rate ratio, m*, and (5) operating factor, H*. The differences in the small-scale and full-scale LAMEEs effectivenesses are numerically investigated for these five important dimensionless parameters. The results show that in most cases the differences between the small-scale and full-scale LAMEE effectivenesses are less than 2%. The comparison between the experimental and numerical sensible, latent and total effectivenesses of the small-scale LAMEE and the full-scale LAMEE shows that there is a similarity between the small-scale and full-scale LAMEEs, and that the small-scale LAMEE effectiveness results can be used to predict the performance of the full-scale LAMEE. [ABSTRACT FROM AUTHOR]

• Integrated mathematical models for counter-flow heat and mass transfer process are built. • Thermodynamic balancing of simultaneous heat and mass transfer process is accomplished by water mass injection/extraction. • The total entropy generation can be minimized at the balance conditions of HCR = 1. • A minimum value of NEG = 0.0054 is obtained at the inlet relative humidity of 0.85. • Adjusting the injection height shows significant potential in reducing the total entropy generation, although the HCR is always 1. In this paper, a specific procedure is considered to reveal how the simultaneous heat and mass transfer process achieves thermodynamic balancing such that the total entropy generation can be minimized, in combination with the unsaturated state of inlet humid air. In view of the simultaneous heat and mass exchange with zero and single water mass injection/extraction, integrated mathematical models based on mass and energy conservation are established using the finite difference method. The novel proposed driving force criterions, heat transfer temperature difference (HTTD) and mass transfer pressure difference (MTPD), are balanced at off-design conditions, while the relevant influences from the critical parameters are investigated and analyzed. The simulation results demonstrate that the total normalized entropy generation (NEG) can be minimized at the balance condition of HCR = 1, meanwhile, the energy efficiency has a minimum value. It is found that single mass injection can better decrease the entropy generation at its minimum point and along the variation curve, compared to zero and single mass extraction. Specific injection ratio is given at the balance condition with fixed inlet liquid-gas ratio. Moreover, it is valuably observed that varying the injection height shows significant potential in reducing entropy generation, although the HCR keeps a constant value of one. Furthermore, a minimum value of NEG = 0.0054 is emerged at φ i = 0.85, as raising the relative humidity of inlet humid air can effectively reduce the total entropy generation and elevate the energy efficiency, simultaneously. Image, graphical abstract [ABSTRACT FROM AUTHOR]