Search

Highlights • The optimal pitch ratio of the ribs mounted in a channel is provided based on inverse analysis. • The entransy dissipation was taken as the objective function in the inverse method. • Taking entransy dissipation as objective function leads to a fast and stable convergence process. Abstract The ribbed surface is a widely used convection heat transfer enhancement technology. The geometric parameters of the ribbed surface have great influences on its heat transfer performance. It is crucial to determine the optimum geometric parameters. In the present work, the optimal arrangement of ribs mounted in a rectangular channel is provided by solving the inverse optimization problem with the entransy dissipation as the objective function. The parameter analysis based on the direct solution is firstly carried out to get an approximate range near the optimal pitch ratio which can provide the initial value for the inverse optimization problem; afterwards, the inverse optimization problem is solved by a modified simplified conjugate gradient method, and the accurate optimal pitch ratio is obtained; finally the optimization results are discussed in detail. The results indicate that, (1) the inverse optimization analysis presented in this paper can provide an accurate optimal value of the pitch ratio; (2) taking the entransy dissipation as the objective function could lead to a faster converge process and give a more stable result than taking the temperature data as the objective function; (3) the optimal value under the fixed heat flux boundary condition is slightly larger than that under the fixed temperature boundary condition. [ABSTRACT FROM AUTHOR]

Abstract: This paper investigates the numerical simulation of non-Fourier transient heat transfer in a two-dimensional sub-100nm metal-oxide-semiconductor field-effect transistor (MOSFET). The dual-phase-lag (DPL) model with a specific normalization procedure is introduced for the modeling of nanoscale heat transport. The boundary conditions are selected similar to what existed in a real MOSFET device, both uniform and non-uniform heat generations within the transistor are applied, and the end parts of the top boundary which are in contact with the metallic material are left open. A temperature-jump boundary condition is used on all boundaries in order to consider the boundary phonon scattering at micro and nanoscale. A three-level finite difference scheme has been employed to generate the numerical results which are illustrated for a silicon sub-100nm MOSFET corresponding to the Knudsen number of 10. The results are presented at real times less than 50ps to avoid the three-dimensional effects. It is concluded that the combination of the DPL model with mixed-type temperature boundary condition is able to predict the heat flux and temperature distribution obtained from the Boltzmann transport equation (BTE) more accurate than the ballistic-diffusive equations (BDE). After verification of our results, the thermal field and the hotspot temperature within the bulk silicon are presented and the effect of adding a layer of silicon-dioxide to the transistor on its thermal behavior has been investigated. [Copyright &y& Elsevier]

Abstract: This paper focuses on the investigation of the 3D mathematical model to simulate the coupled heat and liquid moisture transfer in hygroscopic porous fibrous media. The flow of the liquid moisture, the water vapor sorption/desorption by fibers and the diffusion of the water vapor are taken into account in this 3D model. Prediction-corrector method is used to solve the 3D governing equations. A series of computational results of the coupled heat and moisture transfer are obtained with the specific initial conditions and boundary conditions. The distribution of the water vapor concentration in the void spaces, the volume fraction of the liquid water in the void spaces, the distribution of the water content in fibers and the changes of the temperature in porous fibrous media are computed. It is shown that the effects of the gravity and capillary actions are significant in hygroscopic porous fibrous media. The comparison with the experimental measurements shows the reasonable agreement between the two. The results illustrate that the 3D model of the coupled heat and liquid moisture transfer in hygroscopic porous fibrous media is satisfactory. [Copyright &y& Elsevier]

Abstract: In this paper the two main drawbacks of the heat balance integral methods are examined. Firstly we investigate the choice of approximating function. For a standard polynomial form it is shown that combining the heat balance and refined integral methods to determine the power of the highest order term will either lead to the same, or more often, greatly improved accuracy on standard methods. Secondly we examine thermal problems with a time-dependent boundary condition. In doing so we develop a logarithmic approximating function. This new function allows us to model moving peaks in the temperature profile, a feature that previous heat balance methods cannot capture. If the boundary temperature varies so that at some time t >0 it equals the far-field temperature, then standard methods predict that the temperature is everywhere at this constant value. The new method predicts the correct behaviour. It is also shown that this function provides even more accurate results, when coupled with the new CIM, than the polynomial profile. Analysis primarily focuses on a specified constant boundary temperature and is then extended to constant flux, Newton cooling and time dependent boundary conditions. [Copyright &y& Elsevier]

Abstract: In the paper, numerical and experimental analyses of heat and mass transfer during frost formation on a fin-and-tube heat exchanger have been presented. Modelling of the frost formation on cold surfaces placed in a humid air stream, requires a complex mathematical approach. A transient two-dimensional mathematical model of frost formation has been developed. The applied mathematical model has been defined using governing equations for the boundary layer that include air and frost sub-domains as well as a boundary condition on the air–frost interface. The mathematical model with initial and boundary conditions has been discretised according to the finite volume method and solved numerically using the SIMPLER algorithm for the velocity–pressure coupling. Results have shown that the frost layer formation significantly influences the heat transfer between air and fins. As a result of numerical calculations, time-wise frost thickness variations for different air humidities, temperatures and velocities have been presented. Using the developed mathematical model, the algorithm and the computer code, which have been experimentally validated, it is possible to predict a decrease of exchanged heat flux in the heat exchanger under frost growth conditions. [Copyright &y& Elsevier]