Search

This paper examines the potential of solar and hydrogen (H 2) energy-based hybrid energy systems for residential applications. The growing need for energy and the demand for sustainable energy sources have led to the development of integrated energy systems that combine renewable energy resources to meet energy needs. This paper overviews recent studies on hybrid energy systems for on-grid and off-grid residential utilizations. It discusses the system configuration and components of hybrid energy systems, including solar panels, electrolyzers, fuel cells (FC), and batteries. It also covers the technical optimization of integrated energy systems, including sizing, control strategies, and economic analysis. The key findings of this review paper indicate that hybrid energy systems can offer dependable and sustainable energy for residential applications. Through numerical analyses, the optimal dimensioning of the system elements and control strategies can significantly enhance the system's performance and lower the cost of energy. This study also highlights the challenges and opportunities for integrating hybrid energy systems within residential applications. Overall, it provides in-depth perspectives on the possibilities inherent in solar and hydrogen energy-based hybrid energy systems for residential applications. The findings can guide future research and the advancement of hybrid energy systems for sustainable energy solutions. • Comprehensive review on solar and hydrogen-based residential applications. • Holistic approach to system configuration, optimization, and economics. • Detailed analysis of interconnected components enhancing system efficiency. • Unique focus on real-world residential applications and scenarios. • Broad applicability across diverse geographical regions. [ABSTRACT FROM AUTHOR]

To tackle the carbon emission problem, the exploitation of renewable energy resources (RESs) with zero emissions has gained much importance. In this context, hydrogen has become an important resource to involve itself in distributed energy resources (DERs) to generate electricity, energize vehicles, and heat our living areas. The utilization of hydrogen technologies is indispensable due to their procurement, environmental friendliness, and high efficiency for DERs. A challenging area in the field of hydrogen energy technologies is extracting efficient power and integration to DERs. This paper investigates how to model and operate a proton exchange membrane fuel cell (PEMFC) stack in a DER application to establish a living lab facility for educational and research purposes by covering Power-to-X (P2X). The PEMFC model of the studied system is designed in a MATLAB/Simulink environment and implemented in an experimental testbed. Thus, a fuel cell (FC) unit as a complementary source is preferred to be used near a photovoltaic (PV) array, a small-scale wind turbine (WT), and a lead acid battery energy storage system (BESS) by creating a P2X concept to form a living lab platform. Beyond the model, regarding the experimental part, a PV array, a WT, and a BESS are combined with a PEMFC module that is rated output of 1200 W. Expect for all systems, the FC part is emphasized in this study. Also, a dynamic model of the mentioned PEMFC is proposed and verified. • Importance of hydrogen energy is focused on its advantages, future role, potential, and challenges. • FC unit as a complementary source is evaluated by creating a P2X concept. • This platform is designed to meet the energy needs of research-education, diversify the supply, increase energy independence. • Energy procurement is supplied via green energy during a lesson, which is noteworthy and instructive. • Feasibility of combined PV/WT/BESS/PEMFC system is investigated. [ABSTRACT FROM AUTHOR]

The ongoing transition from fossil fuel-based electricity generation toward green energy relying on the intermittent renewable energy sources indispensably requires development of novel energy conversion and storage methods. Depending on a particular location and local resources, pumped storage, lithium- or sodium-ion batteries, compressed air energy storage, as well as the so called power-to-gas (P2G) technologies may be applied. Taking into account the abundant solar energy resources available in the northwestern China, such as Ningxia hui autonomous region, and local water resources coming from the Yellow River, a power-to-hydrogen (P2H2) distributed energy conversion system is proposed in this paper, which is based on a high-efficiency reversible Solid Oxide Cell (rSOC). The conducted studies comprise tests with simulated current based on the actual photovoltaic power station data, and with usage of the as-obtained Yellow River water for the electrolysis mode without any pretreatment. It is documented that the reversible operation is beneficial, and the tested cell can operate for a prolonged time. Of importance, Na, Ca, Mg, and Si elements remain in an evaporator, and do not contaminate the cell, while higher than the initial boron concentration can be found in the condensed exhaust gases. The respective operational parameters of the system correspond to an electrolysis current density loading up 433.3 mA cm−2 for 4 h, as well as fuel cell operation mode with a current density of 8.3 mA cm−2 for 12 h. It is found that the average voltage losses in the electrolysis cell and fuel cell mode are 0.27 %/cycle and 0.886 %/cycle, respectively, indicating that the lifetime of the cells can be more than 800 h. The reported studies demonstrate validity of applying rSOC-based P2H2 system, especially if abundant photovoltaic power and water resources are available. [Display omitted] • The Yellow River water was utilized by rSOC for the first time. • The designed test current was modeled with local photovoltaics. • The P2H2 nearby consumption system can reversibly operate for over 800 h. • The degradation rates in SOFC mode are lower than those in SOEC mode. • The Yellow River water has no significant effect on the degradation rate. [ABSTRACT FROM AUTHOR]

The global energy issue is undergoing transformation owing to various factors, such as climate change and geopolitics. In the long term, the primary pathways to achieve sustainable energy development remain the clean energy and global cooperation. As the largest energy consumption centers, the Asia Pacific and North America possess complementary energy profiles and developmental needs for cooperation. This paper analyses various electricity or hydrogen transmission technologies suitable for the Pacific Rim energy system. The liquid hydrogen superconducting energy pipelines possess the potential to fulfill the demands of long-distance and large-scale energy transmission. Building upon this technology, a super energy pipeline project connecting East Asia and North America across 12 time zones was proposed. It is composed of pipelines and relay energy stations, which can realize large-scale storage and transportation of renewable energy as well as the diversified energy supply at terminals. The techno-economic evaluation of the project has been comprehensively conducted, and the investment can be recovered within 10 years. The project is expected to boost the progress of renewable energy, ensure regional energy security and promote the sustainable development of global energy. [Display omitted] • Proposes cross-continental energy transmission scheme for Pacific Rim. • Highlights the potential of liquid hydrogen superconducting energy pipelines. • Identifies the future requirements for the energy storage and transmission. • Presents a review of the existing global energy mix. [ABSTRACT FROM AUTHOR]

This paper presents a study that focuses on alleviating the impacts of grid outages in Ethiopia. To deal with grid outages, most industrial customers utilize backup diesel generators (DG) which are environmentally unfriendly and economically not viable. Grid-integration of hybrid renewable energy systems (HRES) might be a possible solution to enhance grid reliability and reduce environmental and economic impacts of utilizing DG. In this study, an optimization of grid integrated HRES is carried out for different dispatch and control strategies. The optimal power supply option is determined by performing comparative analysis of the different configurations of grid integrated HRES. The result of the study shows that grid integrated HRES consisting of photovoltaic and wind turbine as renewable energy sources, and battery and hydrogen as hybrid energy storage systems is found to be the optimal system to supply the load demand. From the hydrogen produced on-site, the FC generator and FCEVs consume 143 620 kg/yr of hydrogen which is equivalent to 394 955 kg/yr gasoline fuel consumption. This corresponds to saving 1 184 865 kg/yr of CO 2 emissions and 605 703 $/yr revenue. Besides, this system yields 547 035.4 $/yr revenue by injecting excess electricity to the grid. The study clearly shows the economic and environmental viability of this new technology for implementation. • Modeling and optimization of grid-integrated HRES including grid-reliability and dispatch control. • Storage of excess electricity produced from renewable energy sources in batteries. • Onsite production of renewable hydrogen with excess electricity produced from renewable energy sources. • The role of renewable hydrogen for simultaneous decarbonization of electricity and transportation sectors. • Minimizing overall operating costs by injecting excess electricity to the grid. [ABSTRACT FROM AUTHOR]